Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:


Set up a matrix in Excel, one column for each ticket position (stack) and one row for each sheet, plus one for field names. Fill the first column down in consecutive order, then the second, starting where the first column leaves off, and so on. Afet a couple of columns are filled, you can auto fill across the rows, too, so the whole thing takes only a couple of minutes. Name the stacks and use a different field for each position on the page when you do the merge. The trick is to set up using a custom file for the total number of tickets or whatever, divided into the correct number of stacks and sheets.
I've managed to edit one using Find and Replace with an { SEQ } field as the replacement to give sequential numbering. This started from 1 which is fine. Subsequent xml's where I've tried to use { SEQ \r n } to get numbering starting from other than 1 results in multiple occurrences of the number as defined by n. It's this way even after updating the fields.
If you are thinking of using sequential numbering, please give our printing experts a call for helpful advice on how to best set up your artwork. We offer ready to use templates for the most common types of forms including invoice templates, statement templates, work order templates and purchase order templates. Just upload your logo and contact information and let us know how you would like to number your forms.
I’d like to build the following expression in my query GetStartWeekNumber(DatePart("ww",[EnteredDate]), Year([EnteredDate])) So if EnteredDate = 11/3/2009 the function would return 11/1/2009 But GetStartWeekNumber does not exist as an Access Built-In Function. Is there another way to do this as an expression in a query? I’m not familiar with creating my own functions. Thanks. That would depend on how you define the start of the week... One option would be to get the day-of-week number of the date (in my system/setup, Monday is day 2), then subtract one less than that...

Rush Flyer Printing offers sequential numbering printing services. We ensure that highest standard of quality is maintained throughout the project to ensure accuracy. We use modern technology and state-of-the-art equipment to ensure that the printing gets done with highest quality standards. We understand that most business today require fast turnaround time and hence offer same day printing solutions for various products. We can even offer same day store pick up for clients from Long Island and New Jersey.

Using this script… no. While I use the data merge feature of InDesign often, I avoid the “multiple records” feature, but I typically prepare one record on one page, output the resulting file to PDF and then let the imposing software take care of the page imposition. If page imposition software is something that you don’t have, there is an alternate technique that requires preparing one record on a page, and then using the multipageimporter2.5 script to import them onto a larger sheet. Here is the link to that article: http://colecandoo.com/2011/10/28/theres-more-than-one-way-to-cut-and-stack/
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
After the { SEQ € \r68}, insert just the { SEQ € } fields where you need them for the sequential numbering. If you copy and paste one of these fields, you'll probably need to select in and press F9 to update it, or you could press Ctrl-A, F9 to update all fields in the document - useful if you've added/deleted one in an existing sequence or if you're adding multiple such fields.

# Hi! I hope you help me with this. I have the almost same problem as #2. I have PassengerTable as table name, then I have the following fields: sequence (to follow what you have in your post), transaction_date, and transaction_ID. Basically I want the to have sequential numbering in the transaction_ID where month and date from transaction_date is shown. i also have a generate (Command27)button as trigger.Tried the code with few modifications, but it sequence doesnt populate, and doesnt show any, except for what i have in control for transaction_ID which is the “Format(transaction_date,”yyyy-mm”) & “-” & Format(sequence,”000″)” and this only shows the year and date, so instead of 2015-08-001 it shows 2015-08-.

So, if you wanted to use this idea in a form or datasheet, let me stop and first remind you – if this is going to be non-updatable, you can just embed a report as a subreport within a form and thus use Running Sum. But let’s discuss the case where you need to be able to edit data in the forms, even with sequential numbering generated for the data you are viewing. This means we need to be able to tie a sequential number to a specific row.
Is there a way to code the special interrogatory numbers wherein the identify of documents is requested such that those specific special interrogatories (and only those specific special interrogatories) are automatically generated in a separate demand for production of documents? In other words if Special Interrogatory numbers 3, 6, 9, 12 request identification of documents, is there a way to code those special interrogatories so that within the demand for production of documents, those specific but individual special interrogatory numbers can be referenced?
But we won’t be stopping at just using a field code to increment the numbers. I’m also going to show you how to save the text (“Interrogatory No.” etc.) that precedes each number as an AutoText entry. That means you’ll be able to type just four letters and hit the Enter key (those are the “5 keystrokes” promised above) and Word will finish the phrase for you, complete with the sequence code to increment the discovery request number for you.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
I need to add 4 "technical contact" fields (which would lookup the Contact entity) to the CONTRACT form. Is this possible? I've found it difficult to figure out what to do first. Thanks in advance, Brandon Not possible. You cant have multiple lookups for the same entity. You also cannot create new relationships between two system entitites. This will work in 4.0 Not possible, Pezman. N:M relationships are not possible in 3.0 yet. There is a alternative solution: a new entity to act as an N:M relationship. In your case, Contract/Contact. This entity has two 1:N relations...
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!
I have screen shots of what I have in my db, where can I send it to you (it is in word format) so that you can take a look at it to see what I am doing wrong. I took a screen shot of what is listed for the button and I took a screen shot of the text box Job No. I don’t know how to bound anything other than put the code behind the button and putting the Job_No in the code as you stated. I understand what you are saying, but I thought if I put the text box name Job No in the code behind the button then it would be bound to my table with the Job No field. Heeeelllllppppp!!!! I am sorry that I can’t seem to grasp this….but appreciate all of your help!
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!
I have now permanently “baked” the Inline Counter system into my InDesign defaults. With no documents open, I made a “Counter” CharStyle and a “Zero Footnote” ParStyle, with those crucial zero-level type size attributes, and selected them in the Document Footnote Options. I also added a blank space as a prefix and a period and a blank space as a suffix. Then I made a keyboard shortcut (Ctrl-Alt-F) for the Footnote/Counter. So now Inline Counters can be inserted anywhere and anytime with close to zero efforts.
Footnotes, after all, are always numbered sequentially and update when you add or remove one. The problem is that each time you add a footnote you get an extra space down at the bottom of the column. The solution? Make a paragraph style for your footnotes that specifies a .1 pt tall size with a 0 (zero) leading, then choose that paragraph style in the Document Footnote Options dialog box.
The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.
The SEQ or Sequential Numbering Function in Word is the best and quickest way to number your tickets. Many raffle ticket templates use them, yet few sites explain how it works. To see if it uses the SEQ function, you need to download the template first. Then, open it in Word, click right in the middle of where a serial number is, and then right-click.
A series is, informally speaking, the sum of the terms of a sequence. That is, it is an expression of the form {\displaystyle \sum _{n=1}^{\infty }a_{n}}  or {\displaystyle a_{1}+a_{2}+\cdots } , where {\displaystyle (a_{n})}  is a sequence of real or complex numbers. The partial sums of a series are the expressions resulting from replacing the infinity symbol with a finite number, i.e. the Nth partial sum of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}}  is the number


Ok I guess it is better for me to explain what I am doing. I am in the process of creating an Access Database that an individual has been using an Excel spreadsheet forever and a day. Well the individual has on occasion doubled up numbers, forgot numbers, etc. So on what I have learned from different Access courses and Google searches I am trying to apply my knowledge.
Layout your ticket in InDesign, one on each page, using the Page Number function to number the tickets. If you have something like Imposer Pro (I know it doesn't work from InDesign CS3) you can, for instance, impose the pages 4up consecutive and get 4 tickets on an A4. Alternatively, make a PDF of the whole document and impose (manually, if you have to), the advantage here is that this can work as a template for other tickets, simply make a new PDF of the same size and update the PDF in the template document every time you have a new raffle ticket to do.

## Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.

I also use InDesign. An Excel file for numbering is easy to create. Then find DataMerge under Automate to link the data file. When you are ready to export, use the create PDF right on the Datamerge window. You can print as cut / stack on the Fiery (or CREO). REMEMBER - if your customer wants them stapled into books of 6 (for example) each stack has to be divisible by 6 if you are going to staple then cut into individual books.

I make the design with as many up as I need on the master page, linking the frames where the numbers will go. Then I make the list using Excel, copy paste to ID and apply a paragraph style with "start in next frame" option. Click the outbox on the pasted text to get a loaded cursor and delete the frame. Then just shift-click over the first textframe on a live page to have as many "tickets" added as needed automatically.
One option, of course, is to print the individual copies of the document, making the edits to the copy number between each print. This gets tedious, real fast. You may also want to utilize a sequential numbering field (as discussed in other WordTips) and make the number of copies equal to what you need to print. Thus, if you have to print 25 copies, you could simply copy the entire document (including the sequential numbering field), move to the end of the document, and paste it in another 24 times. This makes for a rather large overall document, however, and there are easier ways to approach the problem.
Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:
English Spanish Dictionary | English Italian Dictionary | English German Dictionary | English Portuguese Dictionary | English Russian Dictionary | Medical dictionary English French | Computer dictionary English French | Computer dictionary English Spanish | Business dictionary English French | English Arabic Dictionary | English Hebrew Dictionary | English Dutch Dictionary | English Polish Dictionary