In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
Scott, I had posted on Microsoft and you sent me to your blog to have the numbering system (similar to APEX example) explained. I am not a programmer and I don’t understand where these codes and expressions are even suppose to go in access. When I do try to implement the little I do know I continue to get errors. I am not sure if I am putting the information in the wrong place or if I am way off. Do you know of any youtube videos that could walk me through it step by step? Or if you have the time could you help walk me through the steps.
I have several xml files (SMS backup files) I am editing where I want to insert sequential numbering. The number in the id field shown in bold italics below has been replaced with a unique string to allow for a find and replace to be done sequentially giving, e.g. xml a) containing id's 1 to 25, xml b) containing id's 26 to 50, xml c) containing id's 51 to 75 and so on.
An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document.
Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering. I strongly recommend that you read both of these before doing anything with the contents of this chapter.
A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
When you are ready to restart numbering, you can use the technique above, or you can place your cursor inside a numbered paragraph above, click the Format Painter (the paintbrush icon on the Home tab under Clipboard), then click on the line where you want to restart numbering. Using Format Painter this way solves several paragraph numbering problems (the number sequence, indents, and inter-paragraph spacing) simultaneously.

We offer a number of printing solutions for clients around New York. Our speciality is printing club flyers, but we also offer banner printing, signs printing, brochure printing, catalog printing, poster printing, t-shirt printing and more. Along with these, we also offer printing related services like bunting, vinyl printing, die cutting, foil stamping, graphic design and more. We offer shipping to all 48 of the US continental states. Contact us for printing solutions at wholesale prices today!
Klaus Nordby, one of our good-natured Norwegian hecklers, has produced a ray of sunshine in the midst of a deep, dark Scandanavian winter by coming up with a wonderful little trick involving adding sequential numbers inside a paragraph. For example, 1. this is the first clause of this sentence; 2. this is the second; and 3. this is the third. That’s not a big deal to type, of course, but if you had dozens of them and you needed to insert or remove numbering frequently, doing it manually would be a hassle.
OK I found the ControlSource property but it is on the Job No text box, do I enter the code there or am I entering my code on the button I created to save and get new number? If I put it behind the button, when I open the form it goes to the first record so I go to the last record and hit save get new number button and it gives me the number 1……Is it because when I open the form it goes to the first record and not a new record????
Informally, a sequence has a limit if the elements of the sequence become closer and closer to some value {\displaystyle L} (called the limit of the sequence), and they become and remain arbitrarily close to {\displaystyle L} , meaning that given a real number {\displaystyle d} greater than zero, all but a finite number of the elements of the sequence have a distance from {\displaystyle L} less than {\displaystyle d} .
Ok, generating a random 3 digit number is a whole different thing, so I’m not going to go into that. If you want your numbers to start at 100 (to insure three digits) then change the 0 to 99. The Nz function will return the value listed if the field is Null. So the first time you execute that code, the DMax should return a Null since no numbers have been generated for the PONum field. The Nz will then substitute 99 and then increment that by 1. You can accomplish something similar by just entering 100 as the PONum for one record. .
(function(){"use strict";function u(e){return"function"==typeof e||"object"==typeof e&&null!==e}function s(e){return"function"==typeof e}function a(e){X=e}function l(e){G=e}function c(){return function(){r.nextTick(p)}}function f(){var e=0,n=new ne(p),t=document.createTextNode("");return n.observe(t,{characterData:!0}),function(){t.data=e=++e%2}}function d(){var e=new MessageChannel;return e.port1.onmessage=p,function(){e.port2.postMessage(0)}}function h(){return function(){setTimeout(p,1)}}function p(){for(var e=0;et.length)&&(n=t.length),n-=e.length;var r=t.indexOf(e,n);return-1!==r&&r===n}),String.prototype.startsWith||(String.prototype.startsWith=function(e,n){return n=n||0,this.substr(n,e.length)===e}),String.prototype.trim||(String.prototype.trim=function(){return this.replace(/^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g,"")}),String.prototype.includes||(String.prototype.includes=function(e,n){"use strict";return"number"!=typeof n&&(n=0),!(n+e.length>this.length)&&-1!==this.indexOf(e,n)})},"./shared/require-global.js":function(e,n,t){e.exports=t("./shared/require-shim.js")},"./shared/require-shim.js":function(e,n,t){var r=t("./shared/errors.js"),i=(this.window,!1),o=null,u=null,s=new Promise(function(e,n){o=e,u=n}),a=function(e){if(!a.hasModule(e)){var n=new Error('Cannot find module "'+e+'"');throw n.code="MODULE_NOT_FOUND",n}return t("./"+e+".js")};a.loadChunk=function(e){return s.then(function(){return"main"==e?t.e("main").then(function(e){t("./main.js")}.bind(null,t))["catch"](t.oe):"dev"==e?Promise.all([t.e("main"),t.e("dev")]).then(function(e){t("./shared/dev.js")}.bind(null,t))["catch"](t.oe):"internal"==e?Promise.all([t.e("main"),t.e("internal"),t.e("qtext2"),t.e("dev")]).then(function(e){t("./internal.js")}.bind(null,t))["catch"](t.oe):"ads_manager"==e?Promise.all([t.e("main"),t.e("ads_manager")]).then(function(e){undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined}.bind(null,t))["catch"](t.oe):"publisher_dashboard"==e?t.e("publisher_dashboard").then(function(e){undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined}.bind(null,t))["catch"](t.oe):"content_widgets"==e?Promise.all([t.e("main"),t.e("content_widgets")]).then(function(e){t("./content_widgets.iframe.js")}.bind(null,t))["catch"](t.oe):void 0})},a.whenReady=function(e,n){Promise.all(window.webpackChunks.map(function(e){return a.loadChunk(e)})).then(function(){n()})},a.installPageProperties=function(e,n){window.Q.settings=e,window.Q.gating=n,i=!0,o()},a.assertPagePropertiesInstalled=function(){i||(u(),r.logJsError("installPageProperties","The install page properties promise was rejected in require-shim."))},a.prefetchAll=function(){t("./settings.js");Promise.all([t.e("main"),t.e("qtext2")]).then(function(){}.bind(null,t))["catch"](t.oe)},a.hasModule=function(e){return!!window.NODE_JS||t.m.hasOwnProperty("./"+e+".js")},a.execAll=function(){var e=Object.keys(t.m);try{for(var n=0;n=c?n():document.fonts.load(l(o,'"'+o.family+'"'),s).then(function(n){1<=n.length?e():setTimeout(t,25)},function(){n()})}t()});var w=new Promise(function(e,n){a=setTimeout(n,c)});Promise.race([w,m]).then(function(){clearTimeout(a),e(o)},function(){n(o)})}else t(function(){function t(){var n;(n=-1!=y&&-1!=g||-1!=y&&-1!=v||-1!=g&&-1!=v)&&((n=y!=g&&y!=v&&g!=v)||(null===f&&(n=/AppleWebKit\/([0-9]+)(?:\.([0-9]+))/.exec(window.navigator.userAgent),f=!!n&&(536>parseInt(n[1],10)||536===parseInt(n[1],10)&&11>=parseInt(n[2],10))),n=f&&(y==b&&g==b&&v==b||y==x&&g==x&&v==x||y==j&&g==j&&v==j)),n=!n),n&&(null!==_.parentNode&&_.parentNode.removeChild(_),clearTimeout(a),e(o))}function d(){if((new Date).getTime()-h>=c)null!==_.parentNode&&_.parentNode.removeChild(_),n(o);else{var e=document.hidden;!0!==e&&void 0!==e||(y=p.a.offsetWidth,g=m.a.offsetWidth,v=w.a.offsetWidth,t()),a=setTimeout(d,50)}}var p=new r(s),m=new r(s),w=new r(s),y=-1,g=-1,v=-1,b=-1,x=-1,j=-1,_=document.createElement("div");_.dir="ltr",i(p,l(o,"sans-serif")),i(m,l(o,"serif")),i(w,l(o,"monospace")),_.appendChild(p.a),_.appendChild(m.a),_.appendChild(w.a),document.body.appendChild(_),b=p.a.offsetWidth,x=m.a.offsetWidth,j=w.a.offsetWidth,d(),u(p,function(e){y=e,t()}),i(p,l(o,'"'+o.family+'",sans-serif')),u(m,function(e){g=e,t()}),i(m,l(o,'"'+o.family+'",serif')),u(w,function(e){v=e,t()}),i(w,l(o,'"'+o.family+'",monospace'))})})},void 0!==e?e.exports=s:(window.FontFaceObserver=s,window.FontFaceObserver.prototype.load=s.prototype.load)}()},"./third_party/tracekit.js":function(e,n){/**
i have gone through the intersting discussions on this site. I am having a problem with foot notes in Adobe in design cs 4. when i pasted a fresh set of pages in a doc in- in design, the fn numbering starts from 1 all over again in the fresh set of pages. i am not able to insert foot notes manually, as it does not creat the space below the text. I am stuck for help
For years, I've applied an autonumbered style to the first cell I want to be sequentially numbered. When I add rows, the cells immediately below continue that same numbered style whether I add them by tabbing from the end of the last row or by using the commands to inserts rows above or below. Because the numbering is part of a style, it can continue from one table to another, but it can always be restarted. I can even skip a row by changing the style for the particular cell or by just toggling off the numbering. I also use it to show two levels of numbering in a single cell by creating two autonumbered styles in a hierarchy that works just like Heading 1 and Heading 2.
I normally use "Data Merge" in InDesign and use Excel (or something like it) to generate the list of numbers for me. You would copy the numbers into a text file so that InDesign can read them as the merge data source. Note that you would have one ticket on the page and then let InDesign set the other tickets on the page (you can tell the Data Merge control panel about spacing).

Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...


With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:


Drag the number, which Publisher defaults to “1,” into place on the ticket. To change the sequence, such as to start with “100” instead of “1,” click the “Page Number” button again and choose “Format Page Numbers.” Click the “Start this section with” radio button and type the new number into the field. Click the “OK” button to have Publisher update the ticket number.

I am trying to split a single cell into 2 rows can you help If I understood correctly you want to enter an entry in two lines in a cell at appropirate place hit lt+enter and again hit enter for e.g venkat (alt+enter) raman(enter) "trev" wrote in message news:89B2C15C-057F-43B9-8282-37923D5EA397@microsoft.com... > I am trying to split a single cell into 2 rows can you help ...


Although sequences are a type of function, they are usually distinguished notationally from functions in that the input is written as a subscript rather than in parentheses, i.e. an rather than f(n). There are terminological differences as well: the value of a sequence at the input 1 is called the "first element" of the sequence, the value at 2 is called the "second element", etc. Also, while a function abstracted from its input is usually denoted by a single letter, e.g. f, a sequence abstracted from its input is usually written by a notation such as {\displaystyle (a_{n})_{n\in A}} , or just as {\displaystyle (a_{n})} . Here A is the domain, or index set, of the sequence.

I used multi-level lists for this sort of thing. When defining my list, I type “Interrogatory No.” before the number field in the number format definition, link it to a list style, 2nd level I type “Request for Production No”, link it to another list style. I’ll use “Answer” with no number as another level of the list. Then I modify the linked styles so the paragraphs are formatted how I need. In the styles linked to request for production and interrogatories, I will use the style linked to “Answer” as the style for the following paragraph. In the “answer” style, I’ll use Interrogatory as the style for following paragraph.
I am having trouble with this procedure. My situation is almost identical to example #2. I want to populate RecordNumber on my form with a date number like “130001, 130002, etc.” where “13” is the year based on a date automatically generated in the OpenDate field in tblLogRecords. OpenDate is a date/time type field that has a default value of the date the record is created and is not editable. I have added a field called Sequence to tblLogRecords and it is a Number, Long Integer type. I also created a bound control for Sequence on my form. I have a completely separate autonumber field as the PK.
Hi Scott, I had a question regarding the sequential numbering Apex example…I am looking to automatically restart the sequence every month, which is not a problem using your example (i.e. changing the year to month in the expression). However, I would also like to add in a condition for year, so that the sequence restarts for each month of each year (i.e. my problem is for example that Feb 2011 last sequence number is 5, and then in Feb 2012 this becomes 6, where I would like it to be 1). I am wondering what the syntax would be. Thanks in advance, Lawn.

But we won’t be stopping at just using a field code to increment the numbers. I’m also going to show you how to save the text (“Interrogatory No.” etc.) that precedes each number as an AutoText entry. That means you’ll be able to type just four letters and hit the Enter key (those are the “5 keystrokes” promised above) and Word will finish the phrase for you, complete with the sequence code to increment the discovery request number for you.

Rhonda, Thank you for your amazingly quick and thorough reply! You are correct, Word does the Table and Figure numbering splendidly. I was trying to reference those numbers in the text, which I see is a function done quite well in Word using Cross Reference: ‘In Word 2007 and 2010: Display the References tab. In the Captions group, click on the Cross-reference button.’ Thanks again, Joshua.
You won’t use any of the standard List Number styles for SEQ field numbering. You need to create your own style if you want correct indentation and alignment with the tab position of the first word after the number. In this example, I’ll create a new style called Step Number, but you can call it whatever you want. In this example, I’ve also used the default settings for tab and hanging indent positions — you can change these later if you want.
If you’re a self-taught InDesign user, you may not have been introduced to automatic page numbering, one of the biggest time-saving features in the program. InDesign allows you to set up the page numbering feature in your Master Pages. Then, as you add or shuffle pages, InDesign updates individual page numbers accordingly. You can style the page number any way you like.
There are many types of machines printers used to number Carbonless forms. One style is a letter press, another is a pneumatic numbering head which uses air pressure do drive a numbering head and crash imprint the number on the top sheet transferring the number to the other sheets. For example, if you were numbering a 2 part carbonless form you would have a black or red number on the top sheet and a crashed number on the second sheet. The image on the second sheet would appear black no matter what ink was on the top sheet as the carbonless paper transfers the image in black.
I would like to create a custom application that has the ability to maintain the items that are on certain Task Pads within POS 2009. These items would all be regular menu items (ex: hamburger, hot dog, french fries, etc) and not functions. For example, if a task pad was supposed to allow the cashier quick access to daily specials, then this custom application would need to be able to clear the task pad each day and add the items for that day. Is this going to be possible? Please provide some guidance. Thank you, Sean This is a multi-part message in MIME format. ------=_NextPart_00...
Gift certificates and promotional coupons can play an important role in your marketing strategy by drawing new and repeat customers to your business. However, how can you tell if they are really working to help you develop your business? To make the most of your time and your marketing budget, you need to track the success of your marketing efforts so that you can determine what marketing tactics are effective for which customers.
For example, (M, A, R, Y) is a sequence of letters with the letter 'M' first and 'Y' last. This sequence differs from (A, R, M, Y). Also, the sequence (1, 1, 2, 3, 5, 8), which contains the number 1 at two different positions, is a valid sequence. Sequences can be finite, as in these examples, or infinite, such as the sequence of all even positive integers (2, 4, 6, ...). In computing and computer science, finite sequences are sometimes called strings, words or lists, the different names commonly corresponding to different ways to represent them in computer memory; infinite sequences are called streams. The empty sequence ( ) is included in most notions of sequence, but may be excluded depending on the context.
Word templates are wonderful things. Microsoft, and hundreds of other people, have created some great free templates for almost everything. With these free templates you can make meeting agendas The 15 Best Meeting Agenda Templates for Microsoft Word The 15 Best Meeting Agenda Templates for Microsoft Word These meeting agenda templates for Microsoft Word can get you off to a great start for any type of meeting. Read More , beautiful flowcharts How to Create Stunning Flowcharts With Microsoft Word How to Create Stunning Flowcharts With Microsoft Word Used with imagination, flowcharts can simplify both your work or life. Why not try out a few flowcharts with one of the easiest tools on hand – Microsoft Word. Read More , professional resumes How to Create a Resume Template with Microsoft Word How to Create a Resume Template with Microsoft Word Your resume could be the difference between interviewing for the job of your dreams or never hearing back from the employer — use these tips to make sure it's the best it can be. Read More , and custom calendars 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long You can never have enough reminders that your most valuable personal resource is limited. Our selection of printable weekly, monthly, and yearly calendars will help you manage your time wisely. Read More in minutes. A custom calendar might be a good fundraiser, too!
Here, you’ll be given the chance to name your AutoText entry. Name it carefully — for AutoText to work correctly, the first four letters of each of your AutoText entry names will need to be distinct, since these first four letters will be the prompt for Word to offer to complete the phrase for you. My suggestion is to use Interrogatories, Production and Admission as your names, but use whatever is convenient and memorable for you.
I also use InDesign. An Excel file for numbering is easy to create. Then find DataMerge under Automate to link the data file. When you are ready to export, use the create PDF right on the Datamerge window. You can print as cut / stack on the Fiery (or CREO). REMEMBER - if your customer wants them stapled into books of 6 (for example) each stack has to be divisible by 6 if you are going to staple then cut into individual books.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.
Gift certificates and promotional coupons can play an important role in your marketing strategy by drawing new and repeat customers to your business. However, how can you tell if they are really working to help you develop your business? To make the most of your time and your marketing budget, you need to track the success of your marketing efforts so that you can determine what marketing tactics are effective for which customers.

Hello, I'm looking for a way to quickly find what numbers are missing in column B. I can sort them ascending, but how do I find if there are missing numbers? 1 2 3 5 6 7 9 I need to know 4 and 8 are missing. Thank you. One way: select B2:Bx. Choose Format/Conditional Formatting... CF1: Formula is =(B2-B1)>1 Format1: / or, without sorting, select column B (with B1 active): CF1: Formula is =AND(B1>MIN(B:B),COUNTIF(B:B,B1-1)=0) Both CF's will activate if there are missing numbers before them. In article <28706E9E-2624...
It will ask for the number of copies that you want to make and sequentially number each copy.The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
Typically the second option of saving as a CSV file is the one to choose for use with Data Merge. Click the create button to choose a file name and location, make sure that a header has been assigned and click OK. This creates the CSV file that contains the sequential numbers that can then be used in a Data Merge by opening the Data Merge palette, clicking the flyout and clicking Select Data Source…
Modern businesses today require their products to carry unique numbers printed on them for identification purposes. This is where sequential numbering is important. It involves printing of numbers in an ordered or sequential form on to the products or documents. Sequential number printing can be done either in ascending or descending order on a variety of paper types. They can be either be alphanumerical combination or completely numerical. The numbers can be printed anywhere on the media and the sequencing can start from any number the client prefers.
We use the auto page numbering trick here, the trick is to do it as spreads. You just make your pages the same size as the ticket with crops and bleeds. Then set up the shell on the master page and place your auto page number where you want your numbers. Each pages is the next number. You can also have two sets of numbers for perforated ticket. You then can use the page start options to add to the numbers and keep the same number of total numbers. For example you would do a new page start after number 99. 0001 to 0099 so it doesn't add two "0's" to the front of 100 and you get 00100 when you want 0100. Works great for small quantities, we have done up to 1000+ tickets and once you do it once or twice it is a snap to set up. To avoid having to do 1000 pages just send the tickets in groups. Usually between 25 to 100 at a time works good depending on artwork file size. Just save each time before sending to printer and name the file with what the tickets are. Like "MyTickets-0001-0100.Indd". Makes it easier to go back if you have a problem. You can even do two rolls of tickets if your using 12 x 18 sheets by flipping the sheet and doing one row along the top and one along the bottom on reverse side. That is if your ticket is single Sided. Two sided tickets are a bit trickier. :-)
I have a problem with Outlook 2007 and the add-in Access Outlook Add-in for Data Collection and Publishing. This add-in worked when I first installed Outlook 2007 when installing Office 2007 Enterprise. The add-in created a sub-folder in my Inbox named Data Collection Replies and worked well until about 6 weeks ago. Now I can’t get the add-in to work at all even though it appears in the list of COM.adds in Outlook 2007. More perplexing is the error message I now receive EVERY time I click on any email message to read it. The message is titled ‘Custom UI Runtime Error in...

The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
For example, in our law practice, we submit briefs with hundreds of attachments. Those attachments are constantly being reorganized (thus renumbered) and we had to develop a scheme to keep each attachment (and reference to each attachment) organized and accurate. We created a master list of attachments, and captured the dynamic field code in a bookmark. We can then cross-reference to that bookmark (which will return a number) through our documents. Example Public Attachment 68 (where 68 represents a field sequence code, is captured in a bookmark we will call SR_112). The bookmark name is a code name supplied by the drafting lawyer. That way, when the lawyer refers throughout the document to Public Attachment ___, we insert a cross reference to bookmark SR_112, and it always returns an accurate number, even if we reorganize the order of our attachments.
Occasionally we come across project requirements that include the ability to do sequential numbering in Access on a set of data. We cannot just use the auto-number data type because there is no promise of sequentiality but only uniqueness. In other words, if someone creates a record then later deletes it, there will be a gap in the sequence. So, what are our options? There are actually several ways, each with its pros and cons.
For the purposes of this article, we define a sequence to be a function whose domain is an interval of integers. This definition covers several different uses of the word "sequence", including one-sided infinite sequences, bi-infinite sequences, and finite sequences (see below for definitions). However, many authors use a narrower definition by requiring the domain of a sequence to be the set of natural numbers. The narrower definition has the disadvantage that it rules out finite sequences and bi-infinite sequences, both of which are usually called sequences in standard mathematical practice. In some contexts, to shorten exposition, the codomain of the sequence is fixed by context, for example by requiring it to be the set R of real numbers,[2] the set C of complex numbers,[3] or a topological space.[4]
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
Please tell me there is a way to accomplish this.  As stated, if two users launch the initial submission form with the lookup field populated with P1234 for example, the first user to submit get the number, and the second user now has started there purchasing with a duplicated/invalid number.  Can we increment the field on submission load?  Also, the ability to instead show the purchasing number on event completion doesn't work either, too bad.
×