Scott, you’ll need to be more specific to help me. When you say “put this code behind a save button” what exactly does that mean – where do I type the code you provided? Yes, I do have a Save Button, which saves the record and closes the form (but currently has no way to save the next sequential Project ID). I want show this next Project ID (number on the entry form) and have that new number flow to the table along with the other data on the form.

I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...
Hi, As a new user to excel I am thinking of setting up a data base of my music. The total number of tracks is in excess of 70,000. I have seen a simple solution using excel which would be ok but I'm not sure if I can have 70,000 rows in one work sheet. A friend has suggested access which I am not familiar with and don't know if this will allow 70,000 entries. Can anyone please tell me what the maximum numbers are in both access and excel 2003. Cheers Glinty Max in Excel 2003 is 65536 (in one sheet) whereas Access only limit is your memory -- Regards, Peo Sjoblom ...

If you are thinking of using sequential numbering, please give our printing experts a call for helpful advice on how to best set up your artwork. We offer ready to use templates for the most common types of forms including invoice templates, statement templates, work order templates and purchase order templates. Just upload your logo and contact information and let us know how you would like to number your forms.
Any code can read the serial number of a mother board? any example? Thanks! Crystal On Fri, 10 Jun 2005 00:07:16 +0800, "Crystal Lin" wrote: >Any code can read the serial number of a mother board? any example? Thanks! > Do all computers have "mother boards" and do all mother boards have serial numbers? > Any code can read the serial number of a mother board? any example? Thanks! You can read the Serial Number of the hard drive using DiskId32 at http://www.winsim.com/diskid32/diskid32.html . Lynn Let me guess: another mis...
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!

All I want to know is, how do you link fields, like {SEQ}, to a style – so that if I select/apply style “Figure Caption” (my style, I also have “Table Caption”), I get not just the attributes of the style (what it looks like, where it is on the page etc.) but I get a chapter (or section) number + a sequence number added, (e.g. “2-3”). I know about STYLEREF and SEQ Figure # and/or calling a section number (if required) – but I can’t find out how to take the simple and to me obvious step to have sequential numbering (prefixed with either “Figure” or “Table”) attached to my Figure Caption style. It all seems to be a two-step process: (i) select the style, (ii) select the numbering. I want to do both at style level. I want to see/get (e.g.) “Figure 2-3: Linking figure numbering to styles” just by applying my “Figure Caption” style to my figure caption text “Linking figure numbering to styles”. Please, only tell me how to do that, how to link chapter/sequence numbering via a style – i.e. in just one step – applying the style.

Hello! I already have automatic numbering set up (to change paragraph numbers automatically when paragraphs are moved within a document) but I would also like to have automatic lettering within the same document that is independent from the numbering. Example, paragraph 1 references Exhibit A, paragraph 2 references Exhibit B, so on and so forth. Currently using the above referenced method, the auto numbering lettering then follows as if the letters are a representation of the corresponding number (if that makes sense), ex: 1 B 3 C 5 D. How do I have the number sequencing independent from the letter sequence? Thank you in advance!
Perhaps the easiest solution to this problem (short of using a macro) is to simply use the mail-merge capabilities of Word. You would use a simple data source that contained the numbers you want assigned to each copy. Then, place the merge field at the appropriate place in y our document, and run the merge. Each copy will contain the desired copy number. The added benefit of using this approach is that you can use additional information with your merge, as needs dictate. For instance, if each copy of the document was assigned to a particular person, you could simply add another data field to your data source that contained the name of the person to receive the copy. Then, you could print that person's name in each merged document, as well.
As you can see, an idea of sequential numbering can be solved many different ways using different domains. This is typical in this field of work and precisely why it pays to not just consider how you can do it in one domain but also whether the domain is the right domain. We saw how we can easily leverage built-in features such as Transact-SQL’s ROW_NUMBER() or Access report’s Running Sum property. We also not only saw how we can craft our custom solutions in either VBA or SQL but we also see how we can use both together to create a solution that is better.
Using this script… no. While I use the data merge feature of InDesign often, I avoid the “multiple records” feature, but I typically prepare one record on one page, output the resulting file to PDF and then let the imposing software take care of the page imposition. If page imposition software is something that you don’t have, there is an alternate technique that requires preparing one record on a page, and then using the multipageimporter2.5 script to import them onto a larger sheet. Here is the link to that article: http://colecandoo.com/2011/10/28/theres-more-than-one-way-to-cut-and-stack/
It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).
Hi, Let's keep the problem simple. I have one cell that uses an exchange rate from the internet. That cell changes every minute. What I want to do: In an other cell, I want to keep the highest exchange rate ever. So for example: 6:00 exchange rate = 5.00 -- highest exchange rate is 5.00 6:01 exchange rate = 4.98 -- highest exchange rate is 5.00 6:02 exchange rate = 5.02 -- highest exchange rate is 5.02 6:03 exchange rate = 5.01 -- highest exchange rate is 5.02 6:04 exchange rate = 5.03 -- highest exchange rate is 5.03 Of course nor for any minute I use a new cell, it just change the n...
Before you complete the merge, preview the merge results to make sure that the tracking numbers will display as you want them to in your publications. You can preview the merge in two ways: While you are refining the layout to review the layout of the individual coupon or gift certificate, or when you are getting ready to print, to preview the arrangement of coupons or gift certificates on the printed sheet.
Is there a way to do this: I have a form called "List of Proposals Written" that is listed by th Proposal number. Is there a way to display on another excel spreadsheet, the mos current Proposal number? I know Access you use something like Dmax(ProposalID)+1 What should I do in Excel:confused: Any help would be greatly appreciated! Michae -- Message posted from http://www.ExcelForum.com "daniels012 >" < wrote > I have a form called "List of Proposals Written" that is listed by the > Propos...
Changing the numbering display affects how pages are indicated in the InDesign document, as in the Pages panel and in the page box at the bottom of a document window. The numbering display also affects how you specify page ranges when printing and exporting the document. However, the numbering display does not change the appearance of page numbers on document pages.

I created something like this for a demo and didn't have to use a script. If I remember correctly, I leveraged Workflow. Essentially, the form submission would trigger a very simple workflow that would look at the current counter value on a database table and increment it by 1. The next form would then start with a lookup that would grab that counter and put it into a read-only (or hidden) field. Rinse and repeat.
One option, of course, is to print the individual copies of the document, making the edits to the copy number between each print. This gets tedious, real fast. You may also want to utilize a sequential numbering field (as discussed in other WordTips) and make the number of copies equal to what you need to print. Thus, if you have to print 25 copies, you could simply copy the entire document (including the sequential numbering field), move to the end of the document, and paste it in another 24 times. This makes for a rather large overall document, however, and there are easier ways to approach the problem.
For controlname you need to use the name of the control bound to your Project ID# field. However, the # may be complicating things. Type the Me. and Intellisense should give you a list of controls and methods. Press the P key to go to Ps and scroll until you find the controlname. Selecting the name from the Intellisense list will make sure you are using the correct control. That control needs to have a ControlSource of the Project ID# field. If you do this correctly, then pressing the button should populate the control with the next number. It will also save the record.
OK I found the ControlSource property but it is on the Job No text box, do I enter the code there or am I entering my code on the button I created to save and get new number? If I put it behind the button, when I open the form it goes to the first record so I go to the last record and hit save get new number button and it gives me the number 1……Is it because when I open the form it goes to the first record and not a new record????

The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.


!function(e){function n(t){if(r[t])return r[t].exports;var i=r[t]={i:t,l:!1,exports:{}};return e[t].call(i.exports,i,i.exports,n),i.l=!0,i.exports}var t=window.webpackJsonp;window.webpackJsonp=function(n,r,o){for(var u,s,a=0,l=[];a1)for(var t=1;td)return!1;if(p>f)return!1;var e=window.require.hasModule("shared/browser")&&window.require("shared/browser");return!e||!e.opera}function s(){var e="";return"quora.com"==window.Q.subdomainSuffix&&(e+=[window.location.protocol,"//log.quora.com"].join("")),e+="/ajax/log_errors_3RD_PARTY_POST"}function a(){var e=o(h);h=[],0!==e.length&&c(s(),{revision:window.Q.revision,errors:JSON.stringify(e)})}var l=t("./third_party/tracekit.js"),c=t("./shared/basicrpc.js").rpc;l.remoteFetching=!1,l.collectWindowErrors=!0,l.report.subscribe(r);var f=10,d=window.Q&&window.Q.errorSamplingRate||1,h=[],p=0,m=i(a,1e3),w=window.console&&!(window.NODE_JS&&window.UNIT_TEST);n.report=function(e){try{w&&console.error(e.stack||e),l.report(e)}catch(e){}};var y=function(e,n,t){r({name:n,message:t,source:e,stack:l.computeStackTrace.ofCaller().stack||[]}),w&&console.error(t)};n.logJsError=y.bind(null,"js"),n.logMobileJsError=y.bind(null,"mobile_js")},"./shared/globals.js":function(e,n,t){var r=t("./shared/links.js");(window.Q=window.Q||{}).openUrl=function(e,n){var t=e.href;return r.linkClicked(t,n),window.open(t).opener=null,!1}},"./shared/links.js":function(e,n){var t=[];n.onLinkClick=function(e){t.push(e)},n.linkClicked=function(e,n){for(var r=0;r>>0;if("function"!=typeof e)throw new TypeError;for(arguments.length>1&&(t=n),r=0;r>>0,r=arguments.length>=2?arguments[1]:void 0,i=0;i>>0;if(0===i)return-1;var o=+n||0;if(Math.abs(o)===Infinity&&(o=0),o>=i)return-1;for(t=Math.max(o>=0?o:i-Math.abs(o),0);t>>0;if("function"!=typeof e)throw new TypeError(e+" is not a function");for(arguments.length>1&&(t=n),r=0;r>>0;if("function"!=typeof e)throw new TypeError(e+" is not a function");for(arguments.length>1&&(t=n),r=new Array(u),i=0;i>>0;if("function"!=typeof e)throw new TypeError;for(var r=[],i=arguments.length>=2?arguments[1]:void 0,o=0;o>>0,i=0;if(2==arguments.length)n=arguments[1];else{for(;i=r)throw new TypeError("Reduce of empty array with no initial value");n=t[i++]}for(;i>>0;if(0===i)return-1;for(n=i-1,arguments.length>1&&(n=Number(arguments[1]),n!=n?n=0:0!==n&&n!=1/0&&n!=-1/0&&(n=(n>0||-1)*Math.floor(Math.abs(n)))),t=n>=0?Math.min(n,i-1):i-Math.abs(n);t>=0;t--)if(t in r&&r[t]===e)return t;return-1};t(Array.prototype,"lastIndexOf",c)}if(!Array.prototype.includes){var f=function(e){"use strict";if(null==this)throw new TypeError("Array.prototype.includes called on null or undefined");var n=Object(this),t=parseInt(n.length,10)||0;if(0===t)return!1;var r,i=parseInt(arguments[1],10)||0;i>=0?r=i:(r=t+i)<0&&(r=0);for(var o;rsequential numbering in indesign
×