I’ve been searching for the best way to create auto numbering for discovery requests: dare I say in WordPerfect I had the most amazing macros that used “counter” and creating a set of discovery was a snap. I’ve struggled to find something workable in Word. Some people use Discovery Request No. X – Interrogatory; others use Interrogatories No. X, Requests for Production No. X, Requests for Admission No. X throughout a set of discovery. There has to be a way to do this in Word, and I’ve tried several different approaches, none of which worked out that well. Would you please steer me in the right direction? Thanks very, very much.
This tip was very helpful. Now I have been able to automatically number dozens of examples in a linguistics paper, and as I revise the paper and insert new examples between the existing examples, the numbering is automatically adjusted. Now the next step is how to use bookmarks for the references to the examples in the text of the paper. The references need to point to specific examples, and need to be automatically adjusted when the numbering of examples is adjusted. Any ideas on how to do this?
With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.

Thanks for the quick reply, I think I’m a little confused by the Display aspect of this. Artifact ID is a primary key to the table I am working in and I need it to have a unique identifier that other people can search for. The previously adopted naming convention for this ID is that which I mentioned before, Collection Point ID plus a period and then a sequential number restarting at each new Collection Point ID i.e 2-1050.1, 2-1050.2, 2-1060.1 and so on. So I think I actually need to save this in the Artifact ID field. I realize this might be slightly redundant but I’m not sure how the display would work as far as searching for specific Artifact IDs in the future.
we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...
I want to a sequential number to fill in automatically each time the form is filled out. Malissa, A simple way would be to use something like this, you could assign it to a button, an open or before print event. Sheets("Sheet1").Range("A1").Value = _ Sheets("Sheet1").Range("A1").Value + 1 For other ways to do this or if this is going to be used in a temple have a look here http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- Paul B Always backup your data before trying something new Please post any response to the newsgroups so others...
You won’t use any of the standard List Number styles for SEQ field numbering. You need to create your own style if you want correct indentation and alignment with the tab position of the first word after the number. In this example, I’ll create a new style called Step Number, but you can call it whatever you want. In this example, I’ve also used the default settings for tab and hanging indent positions — you can change these later if you want.
It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).
Thanks for the head start on this, it got me part the way through my problem but I found that when I had 3 figures in a row then a map, the next figure would jump back to #.1 again. Because I had figures, maps and tables that needed to be numbered I used the ‘levels’ to differentiate between them as you suggested, but found if you create a new number list for each entry ie. number list for maps, and number list for tables etc then they don’t conflict. thanks for the start off though. no where else pointed it out as clearly as this. Cheers
If the sequence of real numbers (an) is such that all the terms are less than some real number M, then the sequence is said to be bounded from above. In other words, this means that there exists M such that for all n, an ≤ M. Any such M is called an upper bound. Likewise, if, for some real m, an ≥ m for all n greater than some N, then the sequence is bounded from below and any such m is called a lower bound. If a sequence is both bounded from above and bounded from below, then the sequence is said to be bounded.
With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:
Let’s look at why we have this setup. It seems strange to put a ResetRowNumber() call in a WHERE clause, doesn’t it? However, the WHERE clause is actually resolved prior to the SELECT clause. (For those who wants to geek out on SQL internals, Itzik Ben-Gan, a SQL Server MVP has a great post that outlines the logical query processing. Though this is specific to SQL Server, the Access database engine as well the majority of RBMS engines generally follow the same outline). This gives us a convenient point to ensure that the module level variable lngRowNumber is always correctly reset at the right time (e.g. before we start returning records from a query).

Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...
Hi Scott, I had a question regarding the sequential numbering Apex example…I am looking to automatically restart the sequence every month, which is not a problem using your example (i.e. changing the year to month in the expression). However, I would also like to add in a condition for year, so that the sequence restarts for each month of each year (i.e. my problem is for example that Feb 2011 last sequence number is 5, and then in Feb 2012 this becomes 6, where I would like it to be 1). I am wondering what the syntax would be. Thanks in advance, Lawn.
If you want to save all that work you just did, click the Save button. As you exit Word, the Building Blocks (the feature Quick Parts and AutoText are grouped under) are being saved in your Normal template. If you’re really up for a challenge, you could start a whole new discovery template with its own set of Building Blocks like the ones above, then distribute it to your work group so they can get the benefit of your new-found expertise.
I need 2 copies to be printed each time I print from a certain file. Is there any way to save this command so I don't have to change the number of copies each time I print? Hi you could record a macro while doing this manually and assign a shortcut or button to this recorded macro -- Regards Frank Kabel Frankfurt, Germany Hebert45 wrote: > I need 2 copies to be printed each time I print from a certain file. > Is there any way to save this command so I don't have to change the > number of copies each time I print? ...
Hello! I already have automatic numbering set up (to change paragraph numbers automatically when paragraphs are moved within a document) but I would also like to have automatic lettering within the same document that is independent from the numbering. Example, paragraph 1 references Exhibit A, paragraph 2 references Exhibit B, so on and so forth. Currently using the above referenced method, the auto numbering lettering then follows as if the letters are a representation of the corresponding number (if that makes sense), ex: 1 B 3 C 5 D. How do I have the number sequencing independent from the letter sequence? Thank you in advance!
×