An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document. 

I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...
With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:
It will ask for the number of copies that you want to make and sequentially number each copy.The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.
OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.

Yes, I have used this system in a multi-user setting. As noted, the key is to commit the record immediately after generating the sequence. However, if the application is one where there is very heavy transaction processing. In other words dozens of users creating records simultaneously, you might want to guard further against duplication. At the speeds computers process, it is not impossible that multiple users will grab the max value before it can be incremented and saved.


Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
If {\displaystyle (a_{n})} is a sequence of complex numbers rather than a sequence of real numbers, this last formula can still be used to define convergence, with the provision that {\displaystyle |\cdot |} denotes the complex modulus, i.e. {\displaystyle |z|={\sqrt {z^{*}z}}} . If {\displaystyle (a_{n})} is a sequence of points in a metric space, then the formula can be used to define convergence, if the expression {\displaystyle |a_{n}-L|} is replaced by the expression {\displaystyle {\text{dist}}(a_{n},L)} , which denotes the distance between {\displaystyle a_{n}} and {\displaystyle L} .
Budget is our income and sometimes this is positive. I need to make this column in a query all negitive values. I am using the IIf function but it is not working. Budget: [budget_amount] IIf ([budget_amount] >=0, [budget_amount]*-1, [budget_amount]) or is there another function I could use? On Mon, 29 Oct 2007 19:18:00 -0700, Tamm Fox wrote: > Budget is our income and sometimes this is positive. I need to make this > column in a query all negitive values. > > I am using the IIf function but it is not working. > > Budget: [budget_amount] IIf ([budget_amount] &g...
The new SQL stored procedure lookup rules in Forms 9.1 make doing something like this possible. The example in the online help shows how to use a stored procedure to auto-append an incrementing number from the database to a form when it loads, which might solve some of your problems. However, the number is incremented after the form loads (not when it is submitted), so that might not exactly fit your needs. Here's the link to the correct page of the online help.

Our purchasing agent would like to be able to have the customers PO# from the Sales Transaction Entry screen show up on the PO's. Is this doable in Report Writer or can it not be done? We are using GP v9.0. As I still consider myself a newbie with RW, I would appreciate detailed instructions if possible. Thank you in advance for all responses. It is not possible thru traditional table relationships in Report Writer. Let me explain: you can certainly link the Purchase Order Work table to the SOP_POLink table and the SOP_POLink table to the SOP Transactions Work table, but will...


For controlname you need to use the name of the control bound to your Project ID# field. However, the # may be complicating things. Type the Me. and Intellisense should give you a list of controls and methods. Press the P key to go to Ps and scroll until you find the controlname. Selecting the name from the Intellisense list will make sure you are using the correct control. That control needs to have a ControlSource of the Project ID# field. If you do this correctly, then pressing the button should populate the control with the next number. It will also save the record.
I've also been using NumberPress for about a year and it is awesome. You can easily position numbers as many up per form and as many up on a sheet as you will ever need. Easily change font, color, point size, angle, number of digits and can even customize prefix-ex: instead of No. you can print ABC or a form number. It also does variable data (I've only used a couple of times).Took a little while to learn but is now a piece of cake.
Here, the field code SEQ is the winning choice. SEQ is a sequence numbering code often used for things like figures or illustrations (think “Figure 1”). What makes it an ideal choice here is the ability to name each sequence separately. In other words, we can define one numbering sequence for interrogatories, another one for requests for production, and a third one for requests for admission. Microsoft Word will be able to keep each numbering sequence separate because each will have a distinct name.
Hello, I'm looking for a way to quickly find what numbers are missing in column B. I can sort them ascending, but how do I find if there are missing numbers? 1 2 3 5 6 7 9 I need to know 4 and 8 are missing. Thank you. One way: select B2:Bx. Choose Format/Conditional Formatting... CF1: Formula is =(B2-B1)>1 Format1: / or, without sorting, select column B (with B1 active): CF1: Formula is =AND(B1>MIN(B:B),COUNTIF(B:B,B1-1)=0) Both CF's will activate if there are missing numbers before them. In article <28706E9E-2624...
I've managed to edit one using Find and Replace with an { SEQ } field as the replacement to give sequential numbering. This started from 1 which is fine. Subsequent xml's where I've tried to use { SEQ \r n } to get numbering starting from other than 1 results in multiple occurrences of the number as defined by n. It's this way even after updating the fields.
Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:
Hello, can anyone help me with making serial numbers in this way: When I purchase 10 chairs, I want to monitor all of it by having serial numbers each of those 10 and those 10 numbers should have the prefix “CHR-” if they are chairs. “TBL” if tables, the codes are associated with the item category. BTW, items have categories predefined by beforehand on the items by relationships. So when I will want to monitor these 10 chairs, I will only have to click the “generate control numbers” button and each of those purchased items get their own control numbers.
Although sequences are a type of function, they are usually distinguished notationally from functions in that the input is written as a subscript rather than in parentheses, i.e. an rather than f(n). There are terminological differences as well: the value of a sequence at the input 1 is called the "first element" of the sequence, the value at 2 is called the "second element", etc. Also, while a function abstracted from its input is usually denoted by a single letter, e.g. f, a sequence abstracted from its input is usually written by a notation such as {\displaystyle (a_{n})_{n\in A}} , or just as {\displaystyle (a_{n})} . Here A is the domain, or index set, of the sequence. sequential numbering in word
×