Note that the list name remains the same for all of these tags. Table titles have a level 4 designation, and Figure titles have a level 5. The numbering style calls out the level 4 numbers (^4) on the Table titles, and the level 5 numbers (^5) for the Figure titles. It’s important to note that for this style, both of these restart after the level 3s (Subhead 2s).
A single InDesign document can contain up to 9,999 pages, but page numbers can be as large as 999,999. (For example, you can correctly number a 100‑page document that starts on page 9,949.) By default, the first page is a recto (right) page numbered 1. Odd-numbered pages always appear on the right; if you use the Section Options command to change the first page number to an even number, the first page becomes a verso (left) page.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
Hello, Here is a scenerio. A client is buying 1lb of ham. It is put on a waxed paper then wrapped into a white paper and then put into a shopping bag. The usage of shopping bag is 100% cases the usage of paper is only with certin categories of sales. Same with the waxed paper. Question: Is there a way of associating wax paper, white paper and shopping bags in a way so with every sale a piece of paper gets deducted from inventory and one bag is deducted from inventory? I would like to run a report every so often and see if I need to purchase any supplies. Kits and assembly do not work...
With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.
Word's numbering feature is easy to use, but it doesn't work in all situations. For instance, it can't handle an inline number sequence. By inline, I mean a sequence of numbers positioned within regular text. Fortunately, the SEQ field code handles these situations. I'll start by showing you how to insert the SEQ field code manually, for those one-time occurrences. If you use this feature often, you'll want to add AutoCorrect items for quick insertion into your text. So we'll look at that, too.
I need a way for the priority level to automatically adjust when I add or change an item with a new priority level. I might have 6 tasks, each will have a different priority. If I add one and set it to 1, the others need to increment + by one digit. Adding one to the above the highest would see no change in the others. Adding one in the middle would spread the rest apart (e.g. I have a 3, I put a new record and put it at 3, the old 3 becomes 4, and so on (everything below it would increment one digit).

The partial sums themselves form a sequence {\displaystyle (S_{N})_{N\in \mathbb {N} }} , which is called the sequence of partial sums of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} . If the sequence of partial sums converges, then we say that the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is convergent, and the limit {\displaystyle \lim _{N\to \infty }S_{N}} is called the value of the series. The same notation is used to denote a series and its value, i.e. we write {\displaystyle \sum _{n=1}^{\infty }a_{n}=\lim _{N\to \infty }S_{N}} .


Perhaps your explanation already addresses this, but I can’t see it. Is there any way this script can be used for printing multiple-up in numeric sequence? For example, if I’m running 1000 postcards 4-up (on 250 sheets). I need the 4 cards on page 1 to be numbered 1, 251, 501, 751; then the 4 cards on page 2 numbered 2, 252, 502, 752; etc., so that when the sheets come out of the printer and are cut into 4, I have a stack of 1-250, a stack of 251-500, a stack of 501-750 and a stack of 751-1000.


Ah, that’s the con – this works beautifully when you are in fact exporting data but when you are viewing the query’s output in a datasheet or a form, as you scroll around, Access will be re-evaluating the rows, including a call to the RowNumber(). But when it repeatedly calls RowNumber(), of course it keeps incrementing blindly, without any regards to whether a number was already generated for that row.

You can define a section prefix to label section pages automatically. For example, if you specify A– for Section Prefix on page 16 of a document and include the section prefix, the page will appear in the table of contents or index as A–16. Text you type for a section marker appears when you choose Type > Insert Special Character > Markers > Section Marker.
The next step is to create the simple Excel workbook that contains the ticket numbers. Open a blank Excel sheet. Using Figure B as a guide, create the ticket numbering sheet and save it, making sure to note the new workbook's name and location. As we discussed earlier, the Excel workbook stores the ticket numbers. In this example, we'll create 11 tickets numbered 100 through 110. You'll need to update the ticket values for each merge.
If you know in advance that you need outline numbering for your paragraphs, you will want to choose the correct format from the Bullets and Numbering dialog box. Applying one of the preset formats to a paragraph or paragraphs that are already bulleted or numbered applies it to the entire list. There is a specific tab for outline numbers — the Outlined Numbered tab.

Using the instructions in #5, add an incrementing SEQ field. You can highlight any of them, except the reset field. For step 7, enter n}. n is the default switch that inserts the next number in the sequence, making it easy to remember. You don't have to specify the \n switch, because it's the default, but you can add it if it helps document your choice.
There are many types of machines printers used to number Carbonless forms. One style is a letter press, another is a pneumatic numbering head which uses air pressure do drive a numbering head and crash imprint the number on the top sheet transferring the number to the other sheets. For example, if you were numbering a 2 part carbonless form you would have a black or red number on the top sheet and a crashed number on the second sheet. The image on the second sheet would appear black no matter what ink was on the top sheet as the carbonless paper transfers the image in black.
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
Can anyone tell me what the maximum no. of worksheets is in Excel? Ton From Help...Limited by available memory (default is 3) -- HTH Nick Hodge Microsoft MVP - Excel Southampton, England nick_hodgeTAKETHISOUT@zen.co.uk.ANDTHIS "Ton" wrote in message news:EB5EE739-9250-4D83-AA7C-EE82C02C0AA3@microsoft.com... > Can anyone tell me what the maximum no. of worksheets is in Excel? The maximum number only depends on the amount of memory available. -- Best Regards Leo Heuser Followup to newsgroup only please. "Ton"
Select the Text Tool (T) and start dragging a text box that will wrap around the whole ticket including the crop marks. This is very important since the Data Merge will automatically calculate the duplication. Then open up the Text Frame Option (Command + B) and set the Inset spacing to 1p4 for the top and 1p8 for the left. Of course, you can place the text for the numbers anywhere you like. I set the numbers to a small text.

If the sequence of real numbers (an) is such that all the terms are less than some real number M, then the sequence is said to be bounded from above. In other words, this means that there exists M such that for all n, an ≤ M. Any such M is called an upper bound. Likewise, if, for some real m, an ≥ m for all n greater than some N, then the sequence is bounded from below and any such m is called a lower bound. If a sequence is both bounded from above and bounded from below, then the sequence is said to be bounded.
I have Office 2003 installed to Windows 2003 terminal servers but I have a problem with on of our users and excel. The issue is that when the user is trying to have multiple spreadsheets opened he keeps getting the message "This operations has been cancelled due to system restrictions- Contact your system Administrator" I can find no setting in excel to enforce a limit on the number of speadsheets a user can have open. Thanks in advance fo any advise Michael Not an expert in these matters, but; Is it possible that the user is trying to initiate another session of Excel vs....
Scott, trying my best to have sequential numbering almost identical to your scenario 1 (bound control on input form which increments last number by 1). Where do I enter this code? I have a form which opens and is ready for entry of new Project Designs. I want to show in the control box the next Project ID (a number) so do I place the code, Me.txtProject ID = Nz(DMax(“[Project ID]”,”DESIGN PROJECTS”),0)+1, under On Load, After Update, or where? And also, the Me.Dirty = False or DoCmd.RunCommand
Another fan of Fusion Pro Desktop here. This is exactly what you need. We have sold both PrintShop Mail and Fusion Pro Desktop for this very application (numbering) and other VDP applications. Fusion Pro Desktop easily beats PrintShop Mail from both a price and performance viewpoint. You could also try Printer's Bench http://www.elkriversystems.com/ProductsList.aspx for a good entry level package
If a sequence converges, then the value it converges to is unique. This value is called the limit of the sequence. The limit of a convergent sequence {\displaystyle (a_{n})}  is normally denoted {\displaystyle \lim _{n\to \infty }a_{n}} . If {\displaystyle (a_{n})}  is a divergent sequence, then the expression {\displaystyle \lim _{n\to \infty }a_{n}} is meaningless.

you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
As you can see, an idea of sequential numbering can be solved many different ways using different domains. This is typical in this field of work and precisely why it pays to not just consider how you can do it in one domain but also whether the domain is the right domain. We saw how we can easily leverage built-in features such as Transact-SQL’s ROW_NUMBER() or Access report’s Running Sum property. We also not only saw how we can craft our custom solutions in either VBA or SQL but we also see how we can use both together to create a solution that is better.
Is there a way to have page numbering span multiple worksheets in a file? I would like to be able to print all the worksheets in a file and have the page numbers in the second worksheet pick up where the page numbers in the first worksheet ended without having to manually adjust the start point in worksheet 2. Please response back to the group. Thanks. JWeinberg I assume the page numbers are set up in your header/footer. If this is correct then all you need to do is select all the sheets you want to print by clicking on each sheet tab while holding down the control key. This will the...
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
Hi Silver, Try going to File/Page Setup/Header-Footer/Custom Header/Should be the button shown in the header box with the # sign in it. Larry -- keithl816 ------------------------------------------------------------------------ keithl816's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=21287 View this thread: http://www.excelforum.com/showthread.php?threadid=498476 ...
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
I have a table named Artifact Catalog in which there is a field Collection Point ID and a field Artifact ID. On the form I have created the user will input the Collection Point ID, for example: 2-1050. I need to find a way to have this Collection Point ID automatically generate a corresponding Artifact ID, i.e when you click the save button the first record under Artifact ID becomes: 2-1050.1 and the second becomes 2-1050.2 and so on.
I have been researching using sequential numbers for invoices an purchase orders, but all of them seem to advance the number eithe every time the document is opened or saved. My purchase order is par of a larger file, and since I will be opening and saving the fil without necessarily writing a purchase order I need more control ove its advancement. I was wondering how I could create a button that whe pressed or selected would advance the number by 1? Also, how could make it create a unique number depending on who's creating the purchas order. For example, let's say the user is ...
Other notations can be useful for sequences whose pattern cannot be easily guessed, or for sequences that do not have a pattern such as the digits of π. One such notation is to write down a general formula for computing the nth term as a function of n, enclose it in parentheses, and include a subscript indicating the range of values that n can take. For example, in this notation the sequence of even numbers could be written as {\displaystyle (2n)_{n\in \mathbb {N} }} . The sequence of squares could be written as {\displaystyle (n^{2})_{n\in \mathbb {N} }} . The variable n is called an index, and the set of values that it can take is called the index set.
I have several xml files (SMS backup files) I am editing where I want to insert sequential numbering. The number in the id field shown in bold italics below has been replaced with a unique string to allow for a find and replace to be done sequentially giving, e.g. xml a) containing id's 1 to 25, xml b) containing id's 26 to 50, xml c) containing id's 51 to 75 and so on.
I make the design with as many up as I need on the master page, linking the frames where the numbers will go. Then I make the list using Excel, copy paste to ID and apply a paragraph style with "start in next frame" option. Click the outbox on the pasted text to get a loaded cursor and delete the frame. Then just shift-click over the first textframe on a live page to have as many "tickets" added as needed automatically.
A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).

In this situation I would suggest using an Alternate Layout. Once the content is final, choose Create Alternate Layout from the Pages panel menu. Make sure to create the new layout the same size and orientation as the original and then use the Numbering and Section Options dialog to specify the numbering required for the second catalog. The Print dialog will then let you select which layout to print.
Scott, I was able to try this as I assumed that is what I needed to do. It does not work. First, the current macro for that button is a Save Record, Close Window operation. How could I keep this and also add Code? If I just add a new button to the form and under the On Click Event put the code you suggested, I get a compile error of “method or data member not found” and ” .txtPROJECT” is highlighted. The actual field is “PROJECT ID#” and it is a long integer number. Entry I have is: Private Sub Command88_Click()
×