There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.
I’d like to build the following expression in my query GetStartWeekNumber(DatePart("ww",[EnteredDate]), Year([EnteredDate])) So if EnteredDate = 11/3/2009 the function would return 11/1/2009 But GetStartWeekNumber does not exist as an Access Built-In Function. Is there another way to do this as an expression in a query? I’m not familiar with creating my own functions. Thanks. That would depend on how you define the start of the week... One option would be to get the day-of-week number of the date (in my system/setup, Monday is day 2), then subtract one less than that...

Thank you for your prompt response, Deborah. However, I don’t believe I explained myself in the detail required. To reiterate: My autonumbering example is FORM INTERROGATORY NO. 1.1. The next interrogatory would be numbered 1.2, then 1.3, etc.–automatically and sequentially numbered. Next would be FORM INTERROGATORY NO. 2.1 (see example 1.1 above). Please understand that the interrogatory must be auto-numbered–both the 1 and the 1, both the 1 and the 2, etc.; both the 2 and the 1, both the 2 and the 2; both the 3 and the 1; both the 3 and the 2. That is my dilemma.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...
Ok, generating a random 3 digit number is a whole different thing, so I’m not going to go into that. If you want your numbers to start at 100 (to insure three digits) then change the 0 to 99. The Nz function will return the value listed if the field is Null. So the first time you execute that code, the DMax should return a Null since no numbers have been generated for the PONum field. The Nz will then substitute 99 and then increment that by 1. You can accomplish something similar by just entering 100 as the PONum for one record. .
- [Instructor] In this week's Word tip I'd like to address a question I'm often asked by people working in tables here in Microsoft Word and that is is there a way to quickly have numbers automatically fill up cells in the table much like they might in Microsoft Excel when you have incremental numbers that need to appear by simple clicking and dragging the corner of a cell. Well, yes, it can be done here in the table in Microsoft Word. It's not done the same way but it is just as easy and we're going to do it with this file, LeafAndMortar Inventory 040. If you have the exercise files, open it up. Now, if you don't have the exercise files, just use one of your own tables. All you need is an empty column. You can see here on page one we do have a table for garden tools and inventory and we need to number these and instead going into each cell and typing in a new number that increments by one, we're going to use a trick to have it automatically fill up that way. On page two of this document you can see there's a second table for hardscaping tools, so we want to differentiate these numbers, so we might want, for example, hardscaping tools, their item numbers to start with the letters HT whereas the garden tools up above might need to start with GT and then the number. Keep that in mind as we now go to the column where we want the numbers to appear. All you need to do is select the entire column. In this case we have a header column with a label in there, item number, so we're not going to use the trick of going to the top and clicking when that arrow appears, instead we're going to select the cells where the numbers need to go. With them selected, now we'll go to the ribbon. With the Home tab selected, go to the Paragraph group and just go to the Numbering dropdown arrow. Don't click the numbering button, that's going to add the default number but click the dropdown. You'll see the different numbering options that are already in the numbering library. You can hover over those to see what it's going to look like. You can see the numbers incrementing by one with a period or with brackets. We could use Roman numerals, even lettering here but if we want our own numbers, we go down a little bit further and click Define New Number. Give that a click. You should see the number style one, two, three selected. Click that dropdown and if you wanted to use something other than one, two, three, like Roman numerals or letters, they're there as well but we do want to start with just plain old numbers one, two, three. And you can see what shows up down below. The number format is the number and then a period and we see a sample of what that's going to look like down below. Well, the first thing we can do is click in that field just to the right of the period and hit your backspace key to take it out, we don't need the period. Now, we can move over to the left side of the number by using the left cursor key or you can click if you want just in front of the one and here's where we can add things like letters. GT, for example, then a dash and if that's all we need, we'll see GT-1, two, three etc. all the way down the column. Maybe you'd like to add zeros in there, like 01, 02 etc. You can do that as well. Once you have exactly what you want, simply click OK and it's done and by the way, that number format is there going forward, so the next time you want to use it, it's going to show up in your numbering library in the document as a number format and if it's one you've recently used, it shows up on this list as well, so you can choose it any time you like. Just click in the background and close that up, click outside the table to deselect everything to see how easy that was to get incremental numbers that start with letters and a dash. Now, scroll down to the table on the second page. Now that you know how to do this, you're going to create your own number style that starts with HT, a dash, perhaps a zero and then incremental numbers by following those same steps on this table. That's your homework knowing what you know after this week's Word tip.
When you are ready to restart numbering, you can use the technique above, or you can place your cursor inside a numbered paragraph above, click the Format Painter (the paintbrush icon on the Home tab under Clipboard), then click on the line where you want to restart numbering. Using Format Painter this way solves several paragraph numbering problems (the number sequence, indents, and inter-paragraph spacing) simultaneously.
For years, I've applied an autonumbered style to the first cell I want to be sequentially numbered. When I add rows, the cells immediately below continue that same numbered style whether I add them by tabbing from the end of the last row or by using the commands to inserts rows above or below. Because the numbering is part of a style, it can continue from one table to another, but it can always be restarted. I can even skip a row by changing the style for the particular cell or by just toggling off the numbering. I also use it to show two levels of numbering in a single cell by creating two autonumbered styles in a hierarchy that works just like Heading 1 and Heading 2.

I tossed back a rather glib answer about using the AutoNumLgl field code to number the discovery requests, and she threw in this little wrinkle: her attorneys like to play mix-and-match with their discovery. In other words, they may put in a couple of interrogatories, then throw in a related request for production, then another interrogatory, then a request for admission that’s related to that interrogatory.

There are a couple of ways you can set up Word 2007/2010 to use SEQ fields for numbering — you can set them up as AutoCorrect entries or as Quick Parts. Both ways work; the method you choose is up to you. This long article describes how to create the SEQ fields and the numbering style in your Normal.dotm template; how to save the SEQ fields as AutoCorrect entries in Word 2007/2010 (and how to use them); and how to save (and use) them as Quick Parts. The most consuming part of this process is settings up the fields and the style; once they’re set up, using them is super easy.

Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
As I indicated, because you want to only generate this number just before saving, I would put this code behind a Save button or another event that runs just before you save the record. So if you want to prevent duplications, you don’t use the expression as a control source, but put the code behind a button or event. Since you have a Save button, put it there.
If the sequence of real numbers (an) is such that all the terms are less than some real number M, then the sequence is said to be bounded from above. In other words, this means that there exists M such that for all n, an ≤ M. Any such M is called an upper bound. Likewise, if, for some real m, an ≥ m for all n greater than some N, then the sequence is bounded from below and any such m is called a lower bound. If a sequence is both bounded from above and bounded from below, then the sequence is said to be bounded.
If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:

Here, you’ll be given the chance to name your AutoText entry. Name it carefully — for AutoText to work correctly, the first four letters of each of your AutoText entry names will need to be distinct, since these first four letters will be the prompt for Word to offer to complete the phrase for you. My suggestion is to use Interrogatories, Production and Admission as your names, but use whatever is convenient and memorable for you.
In this scenario we are assuming that there will be no more than 999 documents attached to a case. In Scenario 2 we assumed no more than 9999 inquires during a year. So you need to adjust the number of zeros when formatting Sequence for the anticipated number of records. Of course this can always be changed later. You also don’t need to format the sequence with leading zeros as the Format function does. As shown the expression returns something like: DCASD/CI123-025 for the 25th document in case CI123 for client DCASD. Without leading zeros it would be: DCASD/CI123-25. The advantage to the latter is that you don’t have to anticipate the number of records you might have in the sequence, but I’ve found many users prefer a more uniform number with the leading zeros.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }}  is monotonically increasing if and only if an+1 {\displaystyle \geq }  an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.

When you are ready to restart numbering, you can use the technique above, or you can place your cursor inside a numbered paragraph above, click the Format Painter (the paintbrush icon on the Home tab under Clipboard), then click on the line where you want to restart numbering. Using Format Painter this way solves several paragraph numbering problems (the number sequence, indents, and inter-paragraph spacing) simultaneously.
Thanks for the quick reply, I think I’m a little confused by the Display aspect of this. Artifact ID is a primary key to the table I am working in and I need it to have a unique identifier that other people can search for. The previously adopted naming convention for this ID is that which I mentioned before, Collection Point ID plus a period and then a sequential number restarting at each new Collection Point ID i.e 2-1050.1, 2-1050.2, 2-1060.1 and so on. So I think I actually need to save this in the Artifact ID field. I realize this might be slightly redundant but I’m not sure how the display would work as far as searching for specific Artifact IDs in the future.
You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
Rush Flyer Printing offers sequential numbering printing services. We ensure that highest standard of quality is maintained throughout the project to ensure accuracy. We use modern technology and state-of-the-art equipment to ensure that the printing gets done with highest quality standards. We understand that most business today require fast turnaround time and hence offer same day printing solutions for various products. We can even offer same day store pick up for clients from Long Island and New Jersey.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.
I am having trouble with this procedure. My situation is almost identical to example #2. I want to populate RecordNumber on my form with a date number like “130001, 130002, etc.” where “13” is the year based on a date automatically generated in the OpenDate field in tblLogRecords. OpenDate is a date/time type field that has a default value of the date the record is created and is not editable. I have added a field called Sequence to tblLogRecords and it is a Number, Long Integer type. I also created a bound control for Sequence on my form. I have a completely separate autonumber field as the PK.
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
sequential numbering labeller paper rotary sequential numbering machine sequential numbering machine sequential number sequential numbering machines sequential number barcode label printing embossed sequential numbers card sequential number plastic card sequential number adhesive sticker sequential labeling sequentially numbered stickers sequentially barcoded labels sequential labels custom sequential number label printing
I create a CStatic object and write some text to the object but the text is too long to display in the work area but I don't konw how to add a vscroll to a CStatic object who can help me? I would say instead of a CStatic, use a CEdit control with the ReadOnly flag set. Because static controls by default aren't scrollable, so even if you add a scrollbar to it, you will have to manage the entire thing yourself (drawing, scrolling....), more trouble than it's worth. Ali R. "Smallfrogs" wrote in message news:eLAO92y7DHA.2832@tk2msft...
It's also possible to consecutively number list items in InDesign. Create a text frame for your list and click the numbered list button to insert a list. Type your list items, pressing your "Enter" key between items. InDesign consecutively numbers the list automatically; you can change the number it begins with and the style of the numerals. Press your "Alt" key (Windows) or "Option" key (Mac OS) while clicking on the numbered list button to open a dialog where you can modify those options.
While InDesign veterans may assume everyone already knows this, I can assure you I have worked with very sophisticated documents from designers who did not take advantage of this basic feature. A good rule of thumb to keep in mind as you tackle InDesign challenges is this: If it’s repetitious, tedious, or time-consuming, there’s probably a built-in solution right there in the program. You just need to go look for it.
I am trying to use mailmerge to print tickets. I tried using a column of sequential numbers on a spreadsheet and inserting that as a field into the mailmerge, but oddly, it used number 8 eight times on the first page, number 16 eight times on the second page, etc. So, I tried using a sequencing field as you describe. It worked great for the first page (numbers 1-8) but when I completed the mailmerge, it repeated numbers 1-8 on each successive sheet. What do I have to do to make this work in a mailmerge?
The second thing you need to do is make sure that Word is configured so that it updates fields when it prints. Now, when you run the macro, you are asked how many copies to print and what starting number to use. The document variable is updated and a single copy of the document is printed. These steps are repeated for the number of times that you chose to print.
No matter how light the file might be, if you need 1000 units, that means you send a 1000-page file to the printer if you use Data Merge, that is not as efficient as sending one page and 1000 numbers to insert in the print stream, but to do that you need a plugin, which is what that page Bob directed you is leading up to. I've never used the program Harbs has mentioned, but he's a pretty smart guy and if he says it works well, I'd take a look.
Michelle Castle began writing professionally in 2005. She has written technology news and tutorials for consumers, brochure and web copy for the Ehlers-Danlos National Foundation, and promotional materials for religious nonprofits including the International Pentecostal Holiness Church. Michelle has a Bachelor of Arts in English from Oklahoma State University.
Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:
For years, I've applied an autonumbered style to the first cell I want to be sequentially numbered. When I add rows, the cells immediately below continue that same numbered style whether I add them by tabbing from the end of the last row or by using the commands to inserts rows above or below. Because the numbering is part of a style, it can continue from one table to another, but it can always be restarted. I can even skip a row by changing the style for the particular cell or by just toggling off the numbering. I also use it to show two levels of numbering in a single cell by creating two autonumbered styles in a hierarchy that works just like Heading 1 and Heading 2.
I've also been using NumberPress for about a year and it is awesome. You can easily position numbers as many up per form and as many up on a sheet as you will ever need. Easily change font, color, point size, angle, number of digits and can even customize prefix-ex: instead of No. you can print ABC or a form number. It also does variable data (I've only used a couple of times).Took a little while to learn but is now a piece of cake.
You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.
Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...

Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.
You could stop there and just copy those little bits of text all through your document. But no, we want to make this really, really easy! So we’re going to set up some AutoText entries. What that’s going to do for you (if you’re using Microsoft Word 2010 or above — if you use version 2007, see below for some caveats) is allow you to type the first four letters of your SEQ name and have Word offer to complete the phrase for you, complete with the incrementing number courtesy of the sequence field code we set up earlier.
Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.

To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.
OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.
One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed. sequential numbering printing