There are many types of machines printers used to number Carbonless forms. One style is a letter press, another is a pneumatic numbering head which uses air pressure do drive a numbering head and crash imprint the number on the top sheet transferring the number to the other sheets. For example, if you were numbering a 2 part carbonless form you would have a black or red number on the top sheet and a crashed number on the second sheet. The image on the second sheet would appear black no matter what ink was on the top sheet as the carbonless paper transfers the image in black.
you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
Set up a matrix in Excel, one column for each ticket position (stack) and one row for each sheet, plus one for field names. Fill the first column down in consecutive order, then the second, starting where the first column leaves off, and so on. Afet a couple of columns are filled, you can auto fill across the rows, too, so the whole thing takes only a couple of minutes. Name the stacks and use a different field for each position on the page when you do the merge. The trick is to set up using a custom file for the total number of tickets or whatever, divided into the correct number of stacks and sheets.
Hello, When I enter 100, it display 1, When I enter 1000, it display 10, ChefChaudart, Is that bad ? That is one of those things that everyone runs into you change the option and it doesn't seem to do anything so you leave it changed. If you enter a decimal point everything is normal i.e. 1000. or 1000.50 but if you fail to enter a decimal point your option in Tools, Options, Edit (tab), [x] fixed decimals 2 will be used. Remove the checkmark and you'll be fine. You can try that on your boss at April Fool's time as long as their not doing your sal...
For example, in our law practice, we submit briefs with hundreds of attachments. Those attachments are constantly being reorganized (thus renumbered) and we had to develop a scheme to keep each attachment (and reference to each attachment) organized and accurate. We created a master list of attachments, and captured the dynamic field code in a bookmark. We can then cross-reference to that bookmark (which will return a number) through our documents. Example Public Attachment 68 (where 68 represents a field sequence code, is captured in a bookmark we will call SR_112). The bookmark name is a code name supplied by the drafting lawyer. That way, when the lawyer refers throughout the document to Public Attachment ___, we insert a cross reference to bookmark SR_112, and it always returns an accurate number, even if we reorganize the order of our attachments.
In summary, paragraph numbering is really just an exercise in logic, and this blog post is showing the numbering styles for a very specific project. Your project may be similar, but not exactly the same. You just need to think though the levels and how you want to restart the numbers. I do my best to think it through correctly the first time, set it up, and then try as hard as I can to break it, so that I can find my errors. The good news is that once you get your numbers working, you shouldn’t ever have to think about it again.
Can anyone tell me what the maximum no. of worksheets is in Excel? Ton From Help...Limited by available memory (default is 3) -- HTH Nick Hodge Microsoft MVP - Excel Southampton, England nick_hodgeTAKETHISOUT@zen.co.uk.ANDTHIS "Ton" wrote in message news:EB5EE739-9250-4D83-AA7C-EE82C02C0AA3@microsoft.com... > Can anyone tell me what the maximum no. of worksheets is in Excel? The maximum number only depends on the amount of memory available. -- Best Regards Leo Heuser Followup to newsgroup only please. "Ton"
I've also been using NumberPress for about a year and it is awesome. You can easily position numbers as many up per form and as many up on a sheet as you will ever need. Easily change font, color, point size, angle, number of digits and can even customize prefix-ex: instead of No. you can print ABC or a form number. It also does variable data (I've only used a couple of times).Took a little while to learn but is now a piece of cake.
##### As I indicated, because you want to only generate this number just before saving, I would put this code behind a Save button or another event that runs just before you save the record. So if you want to prevent duplications, you don’t use the expression as a control source, but put the code behind a button or event. Since you have a Save button, put it there.

Hi, I am creating a process map in Visio, is it possible to get Visio to number my boxs on my flowchart. At the moment I create the shape, put the text in but I have to manually put the number before the text, can visio do this automatically. Thanks Glenn In Visio 2003, try Tools > Add-ons > Visio Extras > Number Shapes. The same feature can be found in previous versions under Tools > Macros. -- Mark Nelson Microsoft Corporation This posting is provided "AS IS" with no warranties, and confers no rights. "Glenn Robertson"
2. In Word 2007 & later, if you put the macro into your 'Capital_Unit_Certificate' document, you'll need to save the document in the docm format and you'll need to enable macros whenever you open the document if you want to print the certificate. Alternatively, if you add the macro to Word's 'Normal' template, the macro will always be available (to you only) an you can keep the document in it's docx format - plus you won't get macro warnings every time you open it.
In this situation I would suggest using an Alternate Layout. Once the content is final, choose Create Alternate Layout from the Pages panel menu. Make sure to create the new layout the same size and orientation as the original and then use the Numbering and Section Options dialog to specify the numbering required for the second catalog. The Print dialog will then let you select which layout to print.


Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...
So, as an example, I’ll start with the style linked to the interrogatory in my multi-level list, type my question, hit return and I’ve got the answer space. Return again, another interrogatory ready to go. Wanted request for production instead of interrogatory? Hit the tab key and it switches to the next list level, which is request for production. (I hope I’ve explained this well enough.)
I have a table named Artifact Catalog in which there is a field Collection Point ID and a field Artifact ID. On the form I have created the user will input the Collection Point ID, for example: 2-1050. I need to find a way to have this Collection Point ID automatically generate a corresponding Artifact ID, i.e when you click the save button the first record under Artifact ID becomes: 2-1050.1 and the second becomes 2-1050.2 and so on.
I have been generating 150-400 page reports with multiple lists in tables. Word's auto numbering would only go so far in applying sequential numbering but then it just stops and I could not use it any more. I had to manually type in the numbered list which was quite annoying and very time consuming. Then I came across your Word Tip. Awesome! It worked. Thanks so very much.
There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.

This will work OK for a small set of data, but the more data there is, the more intensive the subquery becomes, and it must be called repeatedly for each row. This is one of those rare cases where doing it in VBA is faster than doing it in SQL — after all, row numbering is fundamentally iterative, not set-based which just goes against the grain of what SQL was designed to do – solve a problem in a set-based fashion, non-iterative fashion.
Scott, I was able to try this as I assumed that is what I needed to do. It does not work. First, the current macro for that button is a Save Record, Close Window operation. How could I keep this and also add Code? If I just add a new button to the form and under the On Click Event put the code you suggested, I get a compile error of “method or data member not found” and ” .txtPROJECT” is highlighted. The actual field is “PROJECT ID#” and it is a long integer number. Entry I have is: Private Sub Command88_Click()

An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document.

I have several xml files (SMS backup files) I am editing where I want to insert sequential numbering. The number in the id field shown in bold italics below has been replaced with a unique string to allow for a find and replace to be done sequentially giving, e.g. xml a) containing id's 1 to 25, xml b) containing id's 26 to 50, xml c) containing id's 51 to 75 and so on.

### Thank you for posting screenshots with the written directions. Very helpful! In June 2012, I helped set-up the Normal template with Styles for our 35 computers (Word 2010). I’ve been using some QuickParts for certificate of service and signature blocks on my own computer. Now I can add the numbering for discovery and re-deploy with the automatic numbering built in. Thanks!!

Occasionally we come across project requirements that include the ability to do sequential numbering in Access on a set of data. We cannot just use the auto-number data type because there is no promise of sequentiality but only uniqueness. In other words, if someone creates a record then later deletes it, there will be a gap in the sequence. So, what are our options? There are actually several ways, each with its pros and cons.
I removed the required setting on the table level. The form does not give me an error message now, but does not close on its on. I closed it via a command then looked at the Design Projects table to see if the new record, #896, shows up. A new record is there, with all the entered data EXCEPT the very important field of the Project ID. That field is blank.
That’s enough tips for now. You’ll be filling your fundraising thermometer template How to Create Your Custom Excel Fundraising Thermometer Template How to Create Your Custom Excel Fundraising Thermometer Template Use an Excel thermometer chart to visually keep track of your financial goals. Whether you're saving for a new gadget or fundraising for a good cause, here's a step by step tutorial. Read More in no time. Let’s get to the tickets.
Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.
Erica Gamet has been involved in the graphics industry for an unbelievable 30 years! She is a speaker, writer, and trainer, focusing on Adobe InDesign and Illustrator, Apple Keynote and iBooks Author, and other print- and production-related topics. She is a regular presence at CreativePro Week’s PePcon and InDesign Conferences, and has spoken at ebookcraft in Canada and Making Design in Norway. You can find Erica’s online tutorials at CreativeLive and through her YouTube channel. When she isn’t at her computer, she can be found exploring her new homebase of Seattle and the greater Pacific Northwest.


One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed.
InDesign allows you to add a page number marker to a master page within the document. The master page functions as a template for every page it's applied to, so the consecutive page numbers appear on every page. InDesign updates the page number automatically as you insert, delete and move pages. To add a page number marker to a master page, create a text box on the master page by going to the Type menu and choosing "Insert Special Character," "Markers" and then "Current Page Number."
For example, (M, A, R, Y) is a sequence of letters with the letter 'M' first and 'Y' last. This sequence differs from (A, R, M, Y). Also, the sequence (1, 1, 2, 3, 5, 8), which contains the number 1 at two different positions, is a valid sequence. Sequences can be finite, as in these examples, or infinite, such as the sequence of all even positive integers (2, 4, 6, ...). In computing and computer science, finite sequences are sometimes called strings, words or lists, the different names commonly corresponding to different ways to represent them in computer memory; infinite sequences are called streams. The empty sequence ( ) is included in most notions of sequence, but may be excluded depending on the context.
Your raffle might be subject to gaming commission or tax laws. Check with your municipality, state or province, and federal governments to make sure your raffle is legal. These government departments aren’t just enforcers. They are often great resources on how to run a successful fund raising raffle. Raffles are fun! Getting in trouble with the law or tax man is not.
Awhile back, there was an add-on for excel that had a lot more tools. It showed on the toolbar. Somehow I lost it and I would like to get it back. It had a lot of tools like for changing case and fill ins. Any help wouyld be great. Maybe ASAP Utilities. Try a 'net search for this add-in. Gord Dibben MS Excel MVP On Sun, 22 Mar 2009 20:22:43 -0400, "kmkx70a" wrote: >Awhile back, there was an add-on for excel that had a lot more tools. It >showed on the toolbar. Somehow I lost it and I would like to get it back. It >had a lot of t...
You’ve got some tips to help make your raffle more successful. You’ve got several free Word ticket templates to choose from. You know how to sequentially number tickets in two different ways. All that is left for you to do is go sell those tickets, have the draw, and then feel good about helping someone out. All for pennies on the dollar over ordering custom made tickets.
There’s an old Steve Martin joke about how to make a million dollars which starts, “First, get a million dollars…” That’s the key to this trick, too: First, get a bunch of numbers. Here’s a file with 1,197 numbers in it. Now import or paste those numbers into a thread so that the numbers appear in the right place. If you need two matching numbers, just import it twice.

Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).
Now, what’s the deal with the UniqueKeyVariant parameter for the RowNumber() function? We are not even using it all! True, but if we didn’t, Access will call RowNumber() only once for an entire query and thus we get “1” for the entire dataset. That is a good way to save on CPU processing – why call Now() for each row? In this case, we want to go against this CPU-saving measure and ensure that the RowNumber() is in fact called once per row to generate a new number for that row. Thus, we pass in a parameter — a primary key of a table is a good choice for this purpose. So we get a nice sequential number generated all in the query with VBA function.
Now, what’s the deal with the UniqueKeyVariant parameter for the RowNumber() function? We are not even using it all! True, but if we didn’t, Access will call RowNumber() only once for an entire query and thus we get “1” for the entire dataset. That is a good way to save on CPU processing – why call Now() for each row? In this case, we want to go against this CPU-saving measure and ensure that the RowNumber() is in fact called once per row to generate a new number for that row. Thus, we pass in a parameter — a primary key of a table is a good choice for this purpose. So we get a nice sequential number generated all in the query with VBA function.
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.