Some drawbacks to this feature are that you lose a little control when you are typing. Word formats for you and some users do not like this. Also, on certain items, you will get a number when you do not expect or need one. For example, you have an attorney whose name begins with an initial (A. George Smith). When you type the name and press ENTER, the first initial "A." converts to an automatic number.
Moreover, the subscripts and superscripts could have been left off in the third, fourth, and fifth notations, if the indexing set was understood to be the natural numbers. Note that in the second and third bullets, there is a well-defined sequence {\displaystyle (a_{k})_{k=1}^{\infty }} , but it is not the same as the sequence denoted by the expression.
Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
When you are ready to restart numbering, you can use the technique above, or you can place your cursor inside a numbered paragraph above, click the Format Painter (the paintbrush icon on the Home tab under Clipboard), then click on the line where you want to restart numbering. Using Format Painter this way solves several paragraph numbering problems (the number sequence, indents, and inter-paragraph spacing) simultaneously.

OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.


Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
I answer readers' questions about Microsoft Office when I can, but there's no guarantee. When contacting me, be as specific as possible. For example, "Please troubleshoot my workbook and fix what's wrong" probably won't get a response, but "Can you tell me why this formula isn't returning the expected results?" might. Please mention the app and version that you're using. I'm not reimbursed by TechRepublic for my time or expertise, nor do I ask for a fee from readers. You can contact me at susansalesharkins@gmail.com.
Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:

Determine what kind of numbering you want to use for your document or book. For long documents, you can assign chapter numbers. Each document can be assigned only one chapter number. If you want to use different numbering within a document, you can define ranges of pages as sections; these sections can be numbered differently. For example, the first ten pages of a document (the front matter) might use Roman numerals, and the rest of the document might use Arabic numerals.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
Awhile back, there was an add-on for excel that had a lot more tools. It showed on the toolbar. Somehow I lost it and I would like to get it back. It had a lot of tools like for changing case and fill ins. Any help wouyld be great. Maybe ASAP Utilities. Try a 'net search for this add-in. Gord Dibben MS Excel MVP On Sun, 22 Mar 2009 20:22:43 -0400, "kmkx70a" wrote: >Awhile back, there was an add-on for excel that had a lot more tools. It >showed on the toolbar. Somehow I lost it and I would like to get it back. It >had a lot of t...
Note this works only because we create a brand new table, add an autonumber column to it as well any other columns we need then insert records into it. It’ll be contiguous – as long we don’t delete any records from the table. Unfortunately, creating a brand new table every time we run this will result in bloat of the Access file – if you can do it in a separate Access file, all the better so that you can compact it when you need to.
If {\displaystyle (a_{n})}  is a sequence of complex numbers rather than a sequence of real numbers, this last formula can still be used to define convergence, with the provision that {\displaystyle |\cdot |}  denotes the complex modulus, i.e. {\displaystyle |z|={\sqrt {z^{*}z}}} . If {\displaystyle (a_{n})}  is a sequence of points in a metric space, then the formula can be used to define convergence, if the expression {\displaystyle |a_{n}-L|}  is replaced by the expression {\displaystyle {\text{dist}}(a_{n},L)} , which denotes the distance between {\displaystyle a_{n}}  and {\displaystyle L} .

In summary, paragraph numbering is really just an exercise in logic, and this blog post is showing the numbering styles for a very specific project. Your project may be similar, but not exactly the same. You just need to think though the levels and how you want to restart the numbers. I do my best to think it through correctly the first time, set it up, and then try as hard as I can to break it, so that I can find my errors. The good news is that once you get your numbers working, you shouldn’t ever have to think about it again.
To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.
I tossed back a rather glib answer about using the AutoNumLgl field code to number the discovery requests, and she threw in this little wrinkle: her attorneys like to play mix-and-match with their discovery. In other words, they may put in a couple of interrogatories, then throw in a related request for production, then another interrogatory, then a request for admission that’s related to that interrogatory.
In this situation I would suggest using an Alternate Layout. Once the content is final, choose Create Alternate Layout from the Pages panel menu. Make sure to create the new layout the same size and orientation as the original and then use the Numbering and Section Options dialog to specify the numbering required for the second catalog. The Print dialog will then let you select which layout to print.

I have now permanently “baked” the Inline Counter system into my InDesign defaults. With no documents open, I made a “Counter” CharStyle and a “Zero Footnote” ParStyle, with those crucial zero-level type size attributes, and selected them in the Document Footnote Options. I also added a blank space as a prefix and a period and a blank space as a suffix. Then I made a keyboard shortcut (Ctrl-Alt-F) for the Footnote/Counter. So now Inline Counters can be inserted anywhere and anytime with close to zero efforts.
 I'm looking for a script for Laserfiche Forms that will query a database and pull the next number in sequence and display it as the unique identifier for this document.  Once this number has been used, the number should not be used again.  This is similar to what the Submission ID is, but from what I can gather, this number is assigned after the submission takes place.  
×