Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically.
You can control whether your next paragraph number continues the current sequence or starts again at 1 within that same right-click menu. If one of your numbers gets out of sequence, simply right-click and choose Continue Numbering. If you want to force the number back to the beginning (say, you’re switching from interrogatories to requests for production), choose Set Numbering Value (which will also give you the option of continuing the previous list).
Some drawbacks to this feature are that you lose a little control when you are typing. Word formats for you and some users do not like this. Also, on certain items, you will get a number when you do not expect or need one. For example, you have an attorney whose name begins with an initial (A. George Smith). When you type the name and press ENTER, the first initial "A." converts to an automatic number.
Although sequences are a type of function, they are usually distinguished notationally from functions in that the input is written as a subscript rather than in parentheses, i.e. an rather than f(n). There are terminological differences as well: the value of a sequence at the input 1 is called the "first element" of the sequence, the value at 2 is called the "second element", etc. Also, while a function abstracted from its input is usually denoted by a single letter, e.g. f, a sequence abstracted from its input is usually written by a notation such as {\displaystyle (a_{n})_{n\in A}} , or just as {\displaystyle (a_{n})} . Here A is the domain, or index set, of the sequence.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.


You can define a section prefix to label section pages automatically. For example, if you specify A– for Section Prefix on page 16 of a document and include the section prefix, the page will appear in the table of contents or index as A–16. Text you type for a section marker appears when you choose Type > Insert Special Character > Markers > Section Marker.
Awhile back, there was an add-on for excel that had a lot more tools. It showed on the toolbar. Somehow I lost it and I would like to get it back. It had a lot of tools like for changing case and fill ins. Any help wouyld be great. Maybe ASAP Utilities. Try a 'net search for this add-in. Gord Dibben MS Excel MVP On Sun, 22 Mar 2009 20:22:43 -0400, "kmkx70a" wrote: >Awhile back, there was an add-on for excel that had a lot more tools. It >showed on the toolbar. Somehow I lost it and I would like to get it back. It >had a lot of t...
Perhaps the easiest solution to this problem (short of using a macro) is to simply use the mail-merge capabilities of Word. You would use a simple data source that contained the numbers you want assigned to each copy. Then, place the merge field at the appropriate place in y our document, and run the merge. Each copy will contain the desired copy number. The added benefit of using this approach is that you can use additional information with your merge, as needs dictate. For instance, if each copy of the document was assigned to a particular person, you could simply add another data field to your data source that contained the name of the person to receive the copy. Then, you could print that person's name in each merged document, as well.


We use the auto page numbering trick here, the trick is to do it as spreads. You just make your pages the same size as the ticket with crops and bleeds. Then set up the shell on the master page and place your auto page number where you want your numbers. Each pages is the next number. You can also have two sets of numbers for perforated ticket. You then can use the page start options to add to the numbers and keep the same number of total numbers. For example you would do a new page start after number 99. 0001 to 0099 so it doesn't add two "0's" to the front of 100 and you get 00100 when you want 0100. Works great for small quantities, we have done up to 1000+ tickets and once you do it once or twice it is a snap to set up. To avoid having to do 1000 pages just send the tickets in groups. Usually between 25 to 100 at a time works good depending on artwork file size. Just save each time before sending to printer and name the file with what the tickets are. Like "MyTickets-0001-0100.Indd". Makes it easier to go back if you have a problem. You can even do two rolls of tickets if your using 12 x 18 sheets by flipping the sheet and doing one row along the top and one along the bottom on reverse side. That is if your ticket is single Sided. Two sided tickets are a bit trickier. :-)
Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).
It will ask for the number of copies that you want to make and sequentially number each copy.The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.
Please tell me there is a way to accomplish this.  As stated, if two users launch the initial submission form with the lookup field populated with P1234 for example, the first user to submit get the number, and the second user now has started there purchasing with a duplicated/invalid number.  Can we increment the field on submission load?  Also, the ability to instead show the purchasing number on event completion doesn't work either, too bad.
Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!
We offer a number of printing solutions for clients around New York. Our speciality is printing club flyers, but we also offer banner printing, signs printing, brochure printing, catalog printing, poster printing, t-shirt printing and more. Along with these, we also offer printing related services like bunting, vinyl printing, die cutting, foil stamping, graphic design and more. We offer shipping to all 48 of the US continental states. Contact us for printing solutions at wholesale prices today!

The values for Number position (here called Aligned at), Text indent and Follow number with are in the Position section at the bottom. With multi-level numbering, you also have easy access to settings that control the type of numbering at each level, the characters before and after each level’s numbers (period versus parenthesis), and the list number style (1, a, I, etc.).

There are a couple of ways you can set up Word 2007/2010 to use SEQ fields for numbering — you can set them up as AutoCorrect entries or as Quick Parts. Both ways work; the method you choose is up to you. This long article describes how to create the SEQ fields and the numbering style in your Normal.dotm template; how to save the SEQ fields as AutoCorrect entries in Word 2007/2010 (and how to use them); and how to save (and use) them as Quick Parts. The most consuming part of this process is settings up the fields and the style; once they’re set up, using them is super easy.

One option, of course, is to print the individual copies of the document, making the edits to the copy number between each print. This gets tedious, real fast. You may also want to utilize a sequential numbering field (as discussed in other WordTips) and make the number of copies equal to what you need to print. Thus, if you have to print 25 copies, you could simply copy the entire document (including the sequential numbering field), move to the end of the document, and paste it in another 24 times. This makes for a rather large overall document, however, and there are easier ways to approach the problem.
Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically.
There are also other problems – for one thing, it’s not a very generic solution. You must customize several parts to work for different queries. If the set of tables used in the outermost FROM clause are different, to be the innermost FROM clause, you have to adjust the WHERE clause to reference the correct primary key (or some combination thereof). Then you have to also keep the ORDER BY in sync. That’s a lot of tweaks if you want to use it for different queries. That is why this is the last method listed here but it is one possible solution.


To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.
Typically the second option of saving as a CSV file is the one to choose for use with Data Merge. Click the create button to choose a file name and location, make sure that a header has been assigned and click OK. This creates the CSV file that contains the sequential numbers that can then be used in a Data Merge by opening the Data Merge palette, clicking the flyout and clicking Select Data Source…
I'm looking for a script for Laserfiche Forms that will query a database and pull the next number in sequence and display it as the unique identifier for this document.  Once this number has been used, the number should not be used again.  This is similar to what the Submission ID is, but from what I can gather, this number is assigned after the submission takes place.