John, Sorry for the delay, but I was away last week with limited Internet access. I assumed if you had a Save button, you would know how to put code behind it. To see the code behind a button, Select the button in Form Design Mode and open the Properties Dialog (Right click and select properties), on the Events tab there should be something in the On Click event of the button. If you click the Ellipses […] next to the event, it will open Code Builder where you can enter the code.

Word templates are wonderful things. Microsoft, and hundreds of other people, have created some great free templates for almost everything. With these free templates you can make meeting agendas The 15 Best Meeting Agenda Templates for Microsoft Word The 15 Best Meeting Agenda Templates for Microsoft Word These meeting agenda templates for Microsoft Word can get you off to a great start for any type of meeting. Read More , beautiful flowcharts How to Create Stunning Flowcharts With Microsoft Word How to Create Stunning Flowcharts With Microsoft Word Used with imagination, flowcharts can simplify both your work or life. Why not try out a few flowcharts with one of the easiest tools on hand – Microsoft Word. Read More , professional resumes How to Create a Resume Template with Microsoft Word How to Create a Resume Template with Microsoft Word Your resume could be the difference between interviewing for the job of your dreams or never hearing back from the employer — use these tips to make sure it's the best it can be. Read More , and custom calendars 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long You can never have enough reminders that your most valuable personal resource is limited. Our selection of printable weekly, monthly, and yearly calendars will help you manage your time wisely. Read More in minutes. A custom calendar might be a good fundraiser, too!

This requires no pre-knowledge of a primary key and only assumes that when you load the form initially, it is already sorted. Any records newly inserted will get the next bigger number. However, if you requery and it causes the newly inserted rows to be re-sorted, they will be now given a new number that relates to their actual position within the set, which can be either good or bad, depending on your specific requirements.


Rush Flyer Printing offers sequential numbering printing services. We ensure that highest standard of quality is maintained throughout the project to ensure accuracy. We use modern technology and state-of-the-art equipment to ensure that the printing gets done with highest quality standards. We understand that most business today require fast turnaround time and hence offer same day printing solutions for various products. We can even offer same day store pick up for clients from Long Island and New Jersey.
Does anybody have a way of formatting the phone numbers in Outlook 2003 so that they appear as xxx yyy zzzz that is no dashes, no parentheses? If I am going to synch to my PDA I want the numbers as short as possible and, to me, as readable as possible. Steve No. Masking of phone numbers is hard coded and based on your default dialing location. -- Russ Valentine [MVP-Outlook] "Steve E." wrote in message news:2dd601c48eb8$3ff4a1e0$a601280a@phx.gbl... > Does anybody have a way of formatting the phone numbers in > Outlook 2003 so that they appear as x...
The expression: Nz(DMax(“[PONum]”,”tblPO”),0)+1 will check if a PONum already exists. If it doesn’t it returns a 1, if it does it returns the number incremented by 1. If the number exists, but is 0 it will return a 1. In my blog I advise that number should NOT be generated until the user is ready to save the record. And to immediately commit the record after generating the number. Therefore, there should be no issue about giving them a new number if they go back to it.
For example, in our law practice, we submit briefs with hundreds of attachments. Those attachments are constantly being reorganized (thus renumbered) and we had to develop a scheme to keep each attachment (and reference to each attachment) organized and accurate. We created a master list of attachments, and captured the dynamic field code in a bookmark. We can then cross-reference to that bookmark (which will return a number) through our documents. Example Public Attachment 68 (where 68 represents a field sequence code, is captured in a bookmark we will call SR_112). The bookmark name is a code name supplied by the drafting lawyer. That way, when the lawyer refers throughout the document to Public Attachment ___, we insert a cross reference to bookmark SR_112, and it always returns an accurate number, even if we reorganize the order of our attachments.

Infinite sequences of digits (or characters) drawn from a finite alphabet are of particular interest in theoretical computer science. They are often referred to simply as sequences or streams, as opposed to finite strings. Infinite binary sequences, for instance, are infinite sequences of bits (characters drawn from the alphabet {0, 1}). The set C = {0, 1}∞ of all infinite binary sequences is sometimes called the Cantor space.
With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).
Can anyone tell me what the maximum no. of worksheets is in Excel? Ton From Help...Limited by available memory (default is 3) -- HTH Nick Hodge Microsoft MVP - Excel Southampton, England nick_hodgeTAKETHISOUT@zen.co.uk.ANDTHIS "Ton" wrote in message news:EB5EE739-9250-4D83-AA7C-EE82C02C0AA3@microsoft.com... > Can anyone tell me what the maximum no. of worksheets is in Excel? The maximum number only depends on the amount of memory available. -- Best Regards Leo Heuser Followup to newsgroup only please. "Ton"
The best way to do this is to use a primary key. In cases where a query is complex and joins several tables, we may need to use the primary key of the table that’s on the bottom of the relationship hierarchy or possible a concatenation of multiple tables’ unique key so that the expression will be unique and thus we can identify which sequential number we have assigned.
Thank you for posting screenshots with the written directions. Very helpful! In June 2012, I helped set-up the Normal template with Styles for our 35 computers (Word 2010). I’ve been using some QuickParts for certificate of service and signature blocks on my own computer. Now I can add the numbering for discovery and re-deploy with the automatic numbering built in. Thanks!!

I’d like to build the following expression in my query GetStartWeekNumber(DatePart("ww",[EnteredDate]), Year([EnteredDate])) So if EnteredDate = 11/3/2009 the function would return 11/1/2009 But GetStartWeekNumber does not exist as an Access Built-In Function. Is there another way to do this as an expression in a query? I’m not familiar with creating my own functions. Thanks. That would depend on how you define the start of the week... One option would be to get the day-of-week number of the date (in my system/setup, Monday is day 2), then subtract one less than that...
I have a problem with Outlook 2007 and the add-in Access Outlook Add-in for Data Collection and Publishing. This add-in worked when I first installed Outlook 2007 when installing Office 2007 Enterprise. The add-in created a sub-folder in my Inbox named Data Collection Replies and worked well until about 6 weeks ago. Now I can’t get the add-in to work at all even though it appears in the list of COM.adds in Outlook 2007. More perplexing is the error message I now receive EVERY time I click on any email message to read it. The message is titled ‘Custom UI Runtime Error in...
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
For years, I've applied an autonumbered style to the first cell I want to be sequentially numbered. When I add rows, the cells immediately below continue that same numbered style whether I add them by tabbing from the end of the last row or by using the commands to inserts rows above or below. Because the numbering is part of a style, it can continue from one table to another, but it can always be restarted. I can even skip a row by changing the style for the particular cell or by just toggling off the numbering. I also use it to show two levels of numbering in a single cell by creating two autonumbered styles in a hierarchy that works just like Heading 1 and Heading 2.
If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
Scott, I was able to try this as I assumed that is what I needed to do. It does not work. First, the current macro for that button is a Save Record, Close Window operation. How could I keep this and also add Code? If I just add a new button to the form and under the On Click Event put the code you suggested, I get a compile error of “method or data member not found” and ” .txtPROJECT” is highlighted. The actual field is “PROJECT ID#” and it is a long integer number. Entry I have is: Private Sub Command88_Click()
The partial sums themselves form a sequence {\displaystyle (S_{N})_{N\in \mathbb {N} }} , which is called the sequence of partial sums of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} . If the sequence of partial sums converges, then we say that the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is convergent, and the limit {\displaystyle \lim _{N\to \infty }S_{N}} is called the value of the series. The same notation is used to denote a series and its value, i.e. we write {\displaystyle \sum _{n=1}^{\infty }a_{n}=\lim _{N\to \infty }S_{N}} .

You could stop there and just copy those little bits of text all through your document. But no, we want to make this really, really easy! So we’re going to set up some AutoText entries. What that’s going to do for you (if you’re using Microsoft Word 2010 or above — if you use version 2007, see below for some caveats) is allow you to type the first four letters of your SEQ name and have Word offer to complete the phrase for you, complete with the incrementing number courtesy of the sequence field code we set up earlier.
A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
I know that PrintShopMail will do it, but I was wandering if there was a less expensive solution out there so that I could get numbered tickets (usually 4-up) right off the Xerox. I just want to avoid having to go the the Windmill after trimming and doing it the old fashion way. There is a tiny little copy shop here in town that is doing it, and am willing to bet that they are not using PrintShopMail, but I'm also not going to ask them to share their methods with a competitor. There has to be cheaper solution. I know that I can do it with auto page numbering in Indesign, but that means I can only print raffle tickets 1-up which wont work.
Thanks very much for your prompt reply, which reassured me that I was on the right path. From having read various Help topics, I suspected that I'd have to use an Excel data source for the numbers. Fortunately, my knowledge of Excel was good enough to know about the drag and drop facility to create automatic sequential numbering, so the data source creation was easy. In the end, it was the mail merge (no surprises?) which proved a tad tricky, but I got there in the end. I've used MM many times and quite happily in Word documents, but for Publisher label format, it was of course a bit different. The important bit that I had to discover for myself was the significance of, after getting to the Print stage, going into Print options, to Publication & Paper Settings, and selecting Multiple Pages per Sheet (& in my case, also "Single-sided" cos my default of duplex printing had come up). But TA-DA!  All is fine now. Thanks very much again.
An awesome new feature to has been introduced to Microsoft Publisher 2010 is the ability to use Data Sources to create "Catalogue Pages". This is like a Mail Merge for design documents. Now, I would have to agree that Publisher isn't the best graphic design program in the market. But it's certainly adequate for simple ticket designs — for example, for a school social. Let's say we want each ticket to have a unique number and an inspiration quote. This is all possible through Publisher and a data source, e.g. an Excel Spreadsheet.
Even worse (I found out from bitter experience), is that whenever a computer “glitch” (aka “crash”) or “upgrade” (e.g. to a new/different desktop) came along, and our outside IT vendor had to “fix” the “computer” or “system,” (always, of course, at unexpected and unpredictable times), all of my “Auto Text” blocks got “wiped out” (or, I could not find them, even after a few help desk calls), and I had to “reinvent” and “re-keystroke” or “re-save” each of them again (and several times, again). Obviously, frustrating, and largely defeating the efficiency purpose.

OK, First, you need to reread the blog. You should NOT be storing the Transaction_ID. It is a calculated value. Second, your naming is what confused me. Your Passenger table should have an autonumber PassengerID. That PassengerID should be the Foreign Key in your Reservations table. Your servation table should also have an autonumber for ReservationID. I really don’t see why you need sequential numbering in the passenger table. I can understand it in the Reservations table, but not in the passenger table. Also, I don’t see any reason for a transaction date in the passenger table. I can understand a CreateDate for when the passenger signed up.
You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
Although sequences are a type of function, they are usually distinguished notationally from functions in that the input is written as a subscript rather than in parentheses, i.e. an rather than f(n). There are terminological differences as well: the value of a sequence at the input 1 is called the "first element" of the sequence, the value at 2 is called the "second element", etc. Also, while a function abstracted from its input is usually denoted by a single letter, e.g. f, a sequence abstracted from its input is usually written by a notation such as {\displaystyle (a_{n})_{n\in A}} , or just as {\displaystyle (a_{n})} . Here A is the domain, or index set, of the sequence.
Thank you for your prompt response, Deborah. However, I don’t believe I explained myself in the detail required. To reiterate: My autonumbering example is FORM INTERROGATORY NO. 1.1. The next interrogatory would be numbered 1.2, then 1.3, etc.–automatically and sequentially numbered. Next would be FORM INTERROGATORY NO. 2.1 (see example 1.1 above). Please understand that the interrogatory must be auto-numbered–both the 1 and the 1, both the 1 and the 2, etc.; both the 2 and the 1, both the 2 and the 2; both the 3 and the 1; both the 3 and the 2. That is my dilemma.
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
This tip was very helpful. Now I have been able to automatically number dozens of examples in a linguistics paper, and as I revise the paper and insert new examples between the existing examples, the numbering is automatically adjusted. Now the next step is how to use bookmarks for the references to the examples in the text of the paper. The references need to point to specific examples, and need to be automatically adjusted when the numbering of examples is adjusted. Any ideas on how to do this?
There is only one prerequisite to using the macro: you need to make sure that your document contains a bookmark named Serial. This bookmark should reference the serial number in your document, as you want it to appear in the first printed document. (When you are through running the macro, you can save the document and the serial number will be ready for the next time you want to use it.)
I am trying to use mailmerge to print tickets. I tried using a column of sequential numbers on a spreadsheet and inserting that as a field into the mailmerge, but oddly, it used number 8 eight times on the first page, number 16 eight times on the second page, etc. So, I tried using a sequencing field as you describe. It worked great for the first page (numbers 1-8) but when I completed the mailmerge, it repeated numbers 1-8 on each successive sheet. What do I have to do to make this work in a mailmerge?
Automata or finite state machines can typically be thought of as directed graphs, with edges labeled using some specific alphabet, Σ. Most familiar types of automata transition from state to state by reading input letters from Σ, following edges with matching labels; the ordered input for such an automaton forms a sequence called a word (or input word). The sequence of states encountered by the automaton when processing a word is called a run. A nondeterministic automaton may have unlabeled or duplicate out-edges for any state, giving more than one successor for some input letter. This is typically thought of as producing multiple possible runs for a given word, each being a sequence of single states, rather than producing a single run that is a sequence of sets of states; however, 'run' is occasionally used to mean the latter.
The expression: Nz(DMax(“[PONum]”,”tblPO”),0)+1 will check if a PONum already exists. If it doesn’t it returns a 1, if it does it returns the number incremented by 1. If the number exists, but is 0 it will return a 1. In my blog I advise that number should NOT be generated until the user is ready to save the record. And to immediately commit the record after generating the number. Therefore, there should be no issue about giving them a new number if they go back to it.
Let’s look at why we have this setup. It seems strange to put a ResetRowNumber() call in a WHERE clause, doesn’t it? However, the WHERE clause is actually resolved prior to the SELECT clause. (For those who wants to geek out on SQL internals, Itzik Ben-Gan, a SQL Server MVP has a great post that outlines the logical query processing. Though this is specific to SQL Server, the Access database engine as well the majority of RBMS engines generally follow the same outline). This gives us a convenient point to ensure that the module level variable lngRowNumber is always correctly reset at the right time (e.g. before we start returning records from a query).
It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).

An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document.
you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
A3 is the result of A1/21 I want to bracket the number in A4 In MSWorks I would type the statement ="["&string(A3,0)&"]" In excel I get in some cells [1.436871259834] I'd like it to read [1] Help please. -- rodney@touch88gum.com.au (Remove gum to reply) Rodney, ="["&ROUND(A3,0)&"]" -- HTH, Bernie MS Excel MVP "Rodney" wrote in message news:OkME4oGVEHA.2564@TK2MSFTNGP11.phx.gbl... > A3 is the result of A1/21 > I want to bracket the number in A4 > In MSWorks I would type th...
Author, trainer, and learning and development expert David Rivers has over 20 years experience helping government, hi-tech, and healthcare businesses increase their efficiency and productivity by integrating technology tools. With deep experience in Microsoft Office, elearning tools, and assorted productivity tools such as FrameMaker and RoboHelp, David is passionate about helping people improve their workflows to recover time in their schedules. His clients include Microsoft, Corel Corporation, Halogen Software, and the City of Ottawa. David is also a published book author on topics ranging from Photoshop to Acrobat and the Microsoft Digital Image Suite.

This may be a toughie, I use Word to print out order forms for my shop, right now I use a stamp to give each one a unique number just for reference (you know the ones with the dials that updates whenever use). Anyways was wanting to somehow make a macro or something in Word that will automatically increment a order number on the form as I print them.
In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.

Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.
The SEQ or Sequential Numbering Function in Word is the best and quickest way to number your tickets. Many raffle ticket templates use them, yet few sites explain how it works. To see if it uses the SEQ function, you need to download the template first. Then, open it in Word, click right in the middle of where a serial number is, and then right-click.
A sequence space is a vector space whose elements are infinite sequences of real or complex numbers. Equivalently, it is a function space whose elements are functions from the natural numbers to the field K, where K is either the field of real numbers or the field of complex numbers. The set of all such functions is naturally identified with the set of all possible infinite sequences with elements in K, and can be turned into a vector space under the operations of pointwise addition of functions and pointwise scalar multiplication. All sequence spaces are linear subspaces of this space. Sequence spaces are typically equipped with a norm, or at least the structure of a topological vector space.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
Another fan of Fusion Pro Desktop here. This is exactly what you need. We have sold both PrintShop Mail and Fusion Pro Desktop for this very application (numbering) and other VDP applications. Fusion Pro Desktop easily beats PrintShop Mail from both a price and performance viewpoint. You could also try Printer's Bench http://www.elkriversystems.com/ProductsList.aspx for a good entry level package
There are also other problems – for one thing, it’s not a very generic solution. You must customize several parts to work for different queries. If the set of tables used in the outermost FROM clause are different, to be the innermost FROM clause, you have to adjust the WHERE clause to reference the correct primary key (or some combination thereof). Then you have to also keep the ORDER BY in sync. That’s a lot of tweaks if you want to use it for different queries. That is why this is the last method listed here but it is one possible solution.

If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
Klaus Nordby, one of our good-natured Norwegian hecklers, has produced a ray of sunshine in the midst of a deep, dark Scandanavian winter by coming up with a wonderful little trick involving adding sequential numbers inside a paragraph. For example, 1. this is the first clause of this sentence; 2. this is the second; and 3. this is the third. That’s not a big deal to type, of course, but if you had dozens of them and you needed to insert or remove numbering frequently, doing it manually would be a hassle.

Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
I have screen shots of what I have in my db, where can I send it to you (it is in word format) so that you can take a look at it to see what I am doing wrong. I took a screen shot of what is listed for the button and I took a screen shot of the text box Job No. I don’t know how to bound anything other than put the code behind the button and putting the Job_No in the code as you stated. I understand what you are saying, but I thought if I put the text box name Job No in the code behind the button then it would be bound to my table with the Job No field. Heeeelllllppppp!!!! I am sorry that I can’t seem to grasp this….but appreciate all of your help!
×