Thanks for the head start on this, it got me part the way through my problem but I found that when I had 3 figures in a row then a map, the next figure would jump back to #.1 again. Because I had figures, maps and tables that needed to be numbered I used the ‘levels’ to differentiate between them as you suggested, but found if you create a new number list for each entry ie. number list for maps, and number list for tables etc then they don’t conflict. thanks for the start off though. no where else pointed it out as clearly as this. Cheers
I have a cell which has a basic formula in (adding up from 2 other cells) This number can end up being a minus number (-167), If this happens I need to be able to make that minus number appear as a zero (0). Is this possible? please help. =IF(A1+B1<0,0,A1+B1) Alternative =MAX(0,A1+B1) Gord Dibben Excel MVP On Sat, 7 May 2005 08:28:03 -0700, "marcus1066" wrote: >I have a cell which has a basic formula in (adding up from 2 other cells) >This number can end up being a minus number (-167), If this happens I need to >be...
I've also been using NumberPress for about a year and it is awesome. You can easily position numbers as many up per form and as many up on a sheet as you will ever need. Easily change font, color, point size, angle, number of digits and can even customize prefix-ex: instead of No. you can print ABC or a form number. It also does variable data (I've only used a couple of times).Took a little while to learn but is now a piece of cake.

The best way to do this is to use a primary key. In cases where a query is complex and joins several tables, we may need to use the primary key of the table that’s on the bottom of the relationship hierarchy or possible a concatenation of multiple tables’ unique key so that the expression will be unique and thus we can identify which sequential number we have assigned.
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
Thanks for the head start on this, it got me part the way through my problem but I found that when I had 3 figures in a row then a map, the next figure would jump back to #.1 again. Because I had figures, maps and tables that needed to be numbered I used the ‘levels’ to differentiate between them as you suggested, but found if you create a new number list for each entry ie. number list for maps, and number list for tables etc then they don’t conflict. thanks for the start off though. no where else pointed it out as clearly as this. Cheers
Yes, I have used this system in a multi-user setting. As noted, the key is to commit the record immediately after generating the sequence. However, if the application is one where there is very heavy transaction processing. In other words dozens of users creating records simultaneously, you might want to guard further against duplication. At the speeds computers process, it is not impossible that multiple users will grab the max value before it can be incremented and saved.
It's also possible to consecutively number list items in InDesign. Create a text frame for your list and click the numbered list button to insert a list. Type your list items, pressing your "Enter" key between items. InDesign consecutively numbers the list automatically; you can change the number it begins with and the style of the numerals. Press your "Alt" key (Windows) or "Option" key (Mac OS) while clicking on the numbered list button to open a dialog where you can modify those options.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
Hello, can anyone help me with making serial numbers in this way: When I purchase 10 chairs, I want to monitor all of it by having serial numbers each of those 10 and those 10 numbers should have the prefix “CHR-” if they are chairs. “TBL” if tables, the codes are associated with the item category. BTW, items have categories predefined by beforehand on the items by relationships. So when I will want to monitor these 10 chairs, I will only have to click the “generate control numbers” button and each of those purchased items get their own control numbers.
Hi, this is a great write up. I am very new to InDesign and i print onto a range of products and my first order with sequential numbering came up (serial numbers), I have the template made in illustrator and i also have the numbers added (00001 on all of the art work). A friend told me InDesign has a function for automatically incrasing the numbers by 1 for each art work. I have 105 pieces per template, is there a way to import the design and then sort the number (already text edible) and then save as a pdf then send to print?
Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).
Note that we can consider multiple sequences at the same time by using different variables; e.g. {\displaystyle (b_{n})_{n\in \mathbb {N} }} could be a different sequence than {\displaystyle (a_{n})_{n\in \mathbb {N} }} . We can even consider a sequence of sequences: {\displaystyle ((a_{m,n})_{n\in \mathbb {N} })_{m\in \mathbb {N} }} denotes a sequence whose mth term is the sequence {\displaystyle (a_{m,n})_{n\in \mathbb {N} }} .

Or, assuming you have a standard page number field in the header or footer, you could create a macro that goes to the end of the document, prints the current page, then goes to the top of the document, inserts a hard page break and repeats another 99 times. Would leave things a bit messy though. Don't save changes!
This tip was very helpful. Now I have been able to automatically number dozens of examples in a linguistics paper, and as I revise the paper and insert new examples between the existing examples, the numbering is automatically adjusted. Now the next step is how to use bookmarks for the references to the examples in the text of the paper. The references need to point to specific examples, and need to be automatically adjusted when the numbering of examples is adjusted. Any ideas on how to do this?
##### Ok, generating a random 3 digit number is a whole different thing, so I’m not going to go into that. If you want your numbers to start at 100 (to insure three digits) then change the 0 to 99. The Nz function will return the value listed if the field is Null. So the first time you execute that code, the DMax should return a Null since no numbers have been generated for the PONum field. The Nz will then substitute 99 and then increment that by 1. You can accomplish something similar by just entering 100 as the PONum for one record. .

There are also other problems – for one thing, it’s not a very generic solution. You must customize several parts to work for different queries. If the set of tables used in the outermost FROM clause are different, to be the innermost FROM clause, you have to adjust the WHERE clause to reference the correct primary key (or some combination thereof). Then you have to also keep the ORDER BY in sync. That’s a lot of tweaks if you want to use it for different queries. That is why this is the last method listed here but it is one possible solution.


Bottom Line – So, is there: (1) any way to “save” “Auto Text” entries (or similar) so that several people in the office (i.e. attorney, paralegal, secretary, etc.) can “share” and have access to the same set, and thus work better as a “team”?; and (2) if/when a set of “Auto Text” entries is so saved and created, is there any way to keep it “alive” and “safe” so it “survives” the (inevitable) series of computer updates, fixes, server crashes, etc., that will happen over time in a law office (and even several times during the life a litigation case that may last two years or more in an office)?.
Specifically, 8 to 10 times in my career, I have set up a robust set of MS Word “Auto Text Entries.” Some, short phrases as in this article (e.g. “Interrogatory No. __,” “Long Corporate Name of Client, Inc.,” etc.). Some large blocks of text, paragraphs, or formatting chunks (e.g. Memorandum Start (To:, From:, Date:, Subject: etc.); Caption Block for [Local] Court; Signature Block; Certificate of Service, etc.).
Despite its difficulties and drawbacks Word's automatic numbering can be harnessed. The best method I have seen for doing that is with outline numbering as explained by MVP Shauna Kelly in: Outline numbering in Microsoft Word. This takes a good bit of work to get it set-up, but if you get it set up in a template it is well worth the effort and most of your automatic paragraph numbering issues will be resolved.
Even worse (I found out from bitter experience), is that whenever a computer “glitch” (aka “crash”) or “upgrade” (e.g. to a new/different desktop) came along, and our outside IT vendor had to “fix” the “computer” or “system,” (always, of course, at unexpected and unpredictable times), all of my “Auto Text” blocks got “wiped out” (or, I could not find them, even after a few help desk calls), and I had to “reinvent” and “re-keystroke” or “re-save” each of them again (and several times, again). Obviously, frustrating, and largely defeating the efficiency purpose.
Other examples of sequences include ones made up of rational numbers, real numbers, and complex numbers. The sequence (.9, .99, .999, .9999, ...) approaches the number 1. In fact, every real number can be written as the limit of a sequence of rational numbers, e.g. via its decimal expansion. For instance, π is the limit of the sequence (3, 3.1, 3.14, 3.141, 3.1415, ...). A related sequence is the sequence of decimal digits of π, i.e. (3, 1, 4, 1, 5, 9, ...). This sequence does not have any pattern that is easily discernible by eye, unlike the preceding sequence, which is increasing.
Basically, the only difference is that we now maintain a VBA.Collection, and this time we do make use of the UniqueKeyVariant parameter, using it as a key to locate the previously assigned number. If we don’t find it, we add to the VBA.Collection. The SQL to use those 2 functions remains identical. The downside is that if the query generates millions worth of rows, the memory may run out due to a large VBA.Collection. However, if a form is bound to that large dataset, it will likely have several other problems anyway so VBA.Collection should not be a problem for forms that loads a few hundred rows. The other downside is that VBA.Collection will persist indefinitely even long after the query has “finished.” Back to form example, you might need to remember to call the ResetRowNumber() function on a form’s close to ensure that you dispose of the VBA.Collection and free up the memory.
This is how I see it. A person (passenger) makes a reservation. If the person has never made a reservation before, then they are added to the passenger table, But it really makes no sense to assign a sequential number to the passenger. Otherwise, an entry, just needs to be made in the reservations table. The Reservation needs to include the specific train (number and date so there should be a table for train schedules so all you need is a foreign key), the passenger and date of travel. Here I can understand wanting a sequential number to show passengers booked in a day.
Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.
Other examples of sequences include ones made up of rational numbers, real numbers, and complex numbers. The sequence (.9, .99, .999, .9999, ...) approaches the number 1. In fact, every real number can be written as the limit of a sequence of rational numbers, e.g. via its decimal expansion. For instance, π is the limit of the sequence (3, 3.1, 3.14, 3.141, 3.1415, ...). A related sequence is the sequence of decimal digits of π, i.e. (3, 1, 4, 1, 5, 9, ...). This sequence does not have any pattern that is easily discernible by eye, unlike the preceding sequence, which is increasing.
Is there a way to code the special interrogatory numbers wherein the identify of documents is requested such that those specific special interrogatories (and only those specific special interrogatories) are automatically generated in a separate demand for production of documents? In other words if Special Interrogatory numbers 3, 6, 9, 12 request identification of documents, is there a way to code those special interrogatories so that within the demand for production of documents, those specific but individual special interrogatory numbers can be referenced?
Angie, have tried your method; however, I encountered what I surmised was a limit on the amount of characters allowed in that “Enter formatting for number” box: for instance, I can only type as far as “Request for Productio” (excluding quotations)- additional text and codes delete and default back to the incomplete phrase “Request for Productio”. Seems to have a default of 26 characters – anything exceeding that is deleted. The phrase “Request for Admission” completes, but am unable to include anything after that phrase of 26 characters. Not sure why that is, but that’s what I run into when I attempt using the multi-list option.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed. sequential numbering printing