Angie, have tried your method; however, I encountered what I surmised was a limit on the amount of characters allowed in that “Enter formatting for number” box: for instance, I can only type as far as “Request for Productio” (excluding quotations)- additional text and codes delete and default back to the incomplete phrase “Request for Productio”. Seems to have a default of 26 characters – anything exceeding that is deleted. The phrase “Request for Admission” completes, but am unable to include anything after that phrase of 26 characters. Not sure why that is, but that’s what I run into when I attempt using the multi-list option.
There is very simple solution that we use and that is to lay out the sheet say 6 up on a A4 sheet as a master page and in document setup set the number of pages to 1,000 if that is the amount you require. Put a page number on each ticket on the page and although they will all have the same number on each page, we put the the first two letters of the customers business name before each number followed by the letters of the alphabet so it then reads for example BT1A, BT2A, BT3A, BT1B, BT2B, BT2C and so on as each page is printed.

Thanks for the head start on this, it got me part the way through my problem but I found that when I had 3 figures in a row then a map, the next figure would jump back to #.1 again. Because I had figures, maps and tables that needed to be numbered I used the ‘levels’ to differentiate between them as you suggested, but found if you create a new number list for each entry ie. number list for maps, and number list for tables etc then they don’t conflict. thanks for the start off though. no where else pointed it out as clearly as this. Cheers


I created something like this for a demo and didn't have to use a script. If I remember correctly, I leveraged Workflow. Essentially, the form submission would trigger a very simple workflow that would look at the current counter value on a database table and increment it by 1. The next form would then start with a lookup that would grab that counter and put it into a read-only (or hidden) field. Rinse and repeat.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
Before you complete the merge, preview the merge results to make sure that the tracking numbers will display as you want them to in your publications. You can preview the merge in two ways: While you are refining the layout to review the layout of the individual coupon or gift certificate, or when you are getting ready to print, to preview the arrangement of coupons or gift certificates on the printed sheet.
I’m not sure which version of InDesign first introduced printing Thumbnails like this, but even if yours doesn’t support that, your printer driver may have a similar feature of its own. Check the printer’s own dialog box by clicking “Setup…” near the bottom left corner of the Print dialog and dismissing the warning, then clicking “Preferences…” in Windows’s Print dialog that comes up (I’m not sure how to access this on Mac OS X, but I’m pretty sure there’s an easy way). For instance, on many HP printers, the feature you want is called “Pages per sheet” and has a drop-down offering 1, 2, 4, 9, or 16 pages per sheet.
I have a problem with Outlook 2007 and the add-in Access Outlook Add-in for Data Collection and Publishing. This add-in worked when I first installed Outlook 2007 when installing Office 2007 Enterprise. The add-in created a sub-folder in my Inbox named Data Collection Replies and worked well until about 6 weeks ago. Now I can’t get the add-in to work at all even though it appears in the list of COM.adds in Outlook 2007. More perplexing is the error message I now receive EVERY time I click on any email message to read it. The message is titled ‘Custom UI Runtime Error in...
I have Office 2003 installed to Windows 2003 terminal servers but I have a problem with on of our users and excel. The issue is that when the user is trying to have multiple spreadsheets opened he keeps getting the message "This operations has been cancelled due to system restrictions- Contact your system Administrator" I can find no setting in excel to enforce a limit on the number of speadsheets a user can have open. Thanks in advance fo any advise Michael Not an expert in these matters, but; Is it possible that the user is trying to initiate another session of Excel vs....
Note this works only because we create a brand new table, add an autonumber column to it as well any other columns we need then insert records into it. It’ll be contiguous – as long we don’t delete any records from the table. Unfortunately, creating a brand new table every time we run this will result in bloat of the Access file – if you can do it in a separate Access file, all the better so that you can compact it when you need to.
One option, of course, is to print the individual copies of the document, making the edits to the copy number between each print. This gets tedious, real fast. You may also want to utilize a sequential numbering field (as discussed in other WordTips) and make the number of copies equal to what you need to print. Thus, if you have to print 25 copies, you could simply copy the entire document (including the sequential numbering field), move to the end of the document, and paste it in another 24 times. This makes for a rather large overall document, however, and there are easier ways to approach the problem.

So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
I have Office 2003 installed to Windows 2003 terminal servers but I have a problem with on of our users and excel. The issue is that when the user is trying to have multiple spreadsheets opened he keeps getting the message "This operations has been cancelled due to system restrictions- Contact your system Administrator" I can find no setting in excel to enforce a limit on the number of speadsheets a user can have open. Thanks in advance fo any advise Michael Not an expert in these matters, but; Is it possible that the user is trying to initiate another session of Excel vs....
So, if you wanted to use this idea in a form or datasheet, let me stop and first remind you – if this is going to be non-updatable, you can just embed a report as a subreport within a form and thus use Running Sum. But let’s discuss the case where you need to be able to edit data in the forms, even with sequential numbering generated for the data you are viewing. This means we need to be able to tie a sequential number to a specific row.
I would like to create a custom application that has the ability to maintain the items that are on certain Task Pads within POS 2009. These items would all be regular menu items (ex: hamburger, hot dog, french fries, etc) and not functions. For example, if a task pad was supposed to allow the cashier quick access to daily specials, then this custom application would need to be able to clear the task pad each day and add the items for that day. Is this going to be possible? Please provide some guidance. Thank you, Sean This is a multi-part message in MIME format. ------=_NextPart_00...
Yes, I’m a little confused by your brief too. The script that I describe here will create an array of numbers using any step value that it offers, including by 1 number each time. Whether you put the resulting list directly into InDesign as text, or indirectly using the Data Merge feature is up to you. Perhaps learn more about the Data Merge feature of InDesign itself – David Blatner has a great series on Lynda.com that will explain Data Merge much more than I can on this thread.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.
I'm producing gift certificates for a restaurant and they need to be numbered sequentially from 0001 to 0250. Is there any way to do this easily as opposed to numbering each manually? I'm sure I could probably work it out with a print shop, but the job was thrust on me last minute and my options are limited by the short turn around time. Any help would be appreciated. Thanks!...

I know that PrintShopMail will do it, but I was wandering if there was a less expensive solution out there so that I could get numbered tickets (usually 4-up) right off the Xerox. I just want to avoid having to go the the Windmill after trimming and doing it the old fashion way. There is a tiny little copy shop here in town that is doing it, and am willing to bet that they are not using PrintShopMail, but I'm also not going to ask them to share their methods with a competitor. There has to be cheaper solution. I know that I can do it with auto page numbering in Indesign, but that means I can only print raffle tickets 1-up which wont work.
First, you have to use YOUR field and control names. The ones I use are samples. The error you are getting indicated you do not have a control named txtProject. So you have to substitute the correct name of the control. bound to the ProjectID field. By the way it is not a good idea to the octothorpe(#) as part of a field name. A controlname may be different from a fieldname. The name property of a control is on the Other tab in the Properties dialog.
Yes, I have used this system in a multi-user setting. As noted, the key is to commit the record immediately after generating the sequence. However, if the application is one where there is very heavy transaction processing. In other words dozens of users creating records simultaneously, you might want to guard further against duplication. At the speeds computers process, it is not impossible that multiple users will grab the max value before it can be incremented and saved.
The Renumber/Refresh List toolbar command is used to renumber an existing numbered list or to refresh a list after editing. For example if item 3. is deleted from a list by editing then you can use this tool to refresh the list. You can also use the Renumber/Refresh command to number or renumber a selection of list paragraphs with any chosen starting number.

If you are still reading this then perhaps you are looking for a simple and reliable way to number a couple of lists in a Word document. If you read John's article then you have already been informed that field numbering is simple and robust. If you are like 9 out of 10 Word users in my office then anything more than 1. space space Blah, blah "enter" 2. space space Blah, blah ... defies simple! If that applies to you, then the "SeqField Numbering" Add-In presented later in this page is for you.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
You’ve got some tips to help make your raffle more successful. You’ve got several free Word ticket templates to choose from. You know how to sequentially number tickets in two different ways. All that is left for you to do is go sell those tickets, have the draw, and then feel good about helping someone out. All for pennies on the dollar over ordering custom made tickets.
Ok I guess it is better for me to explain what I am doing. I am in the process of creating an Access Database that an individual has been using an Excel spreadsheet forever and a day. Well the individual has on occasion doubled up numbers, forgot numbers, etc. So on what I have learned from different Access courses and Google searches I am trying to apply my knowledge.
There are a couple of ways you can set up Word 2007/2010 to use SEQ fields for numbering — you can set them up as AutoCorrect entries or as Quick Parts. Both ways work; the method you choose is up to you. This long article describes how to create the SEQ fields and the numbering style in your Normal.dotm template; how to save the SEQ fields as AutoCorrect entries in Word 2007/2010 (and how to use them); and how to save (and use) them as Quick Parts. The most consuming part of this process is settings up the fields and the style; once they’re set up, using them is super easy.

In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
I created something like this for a demo and didn't have to use a script. If I remember correctly, I leveraged Workflow. Essentially, the form submission would trigger a very simple workflow that would look at the current counter value on a database table and increment it by 1. The next form would then start with a lookup that would grab that counter and put it into a read-only (or hidden) field. Rinse and repeat.
×