This one is EASY. In InDesign, with a one-sided NCR form, cut the all elements from the first page. Go to your Master page and place. Where you are going to number the forms, draw a text box and insert a page number marker there. Format it to your liking, then insert as many pages as SETS are going to be made. When you go to print, enter 2 or 3 in the copies box, depending if it's 2-part or 3-part and under the properties button, select GROUPED or UNCOLLATED, turn off OFFSET. Violá!

Now, what’s the deal with the UniqueKeyVariant parameter for the RowNumber() function? We are not even using it all! True, but if we didn’t, Access will call RowNumber() only once for an entire query and thus we get “1” for the entire dataset. That is a good way to save on CPU processing – why call Now() for each row? In this case, we want to go against this CPU-saving measure and ensure that the RowNumber() is in fact called once per row to generate a new number for that row. Thus, we pass in a parameter — a primary key of a table is a good choice for this purpose. So we get a nice sequential number generated all in the query with VBA function.


Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
Changing the numbering display affects how pages are indicated in the InDesign document, as in the Pages panel and in the page box at the bottom of a document window. The numbering display also affects how you specify page ranges when printing and exporting the document. However, the numbering display does not change the appearance of page numbers on document pages.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
Thank you for posting screenshots with the written directions. Very helpful! In June 2012, I helped set-up the Normal template with Styles for our 35 computers (Word 2010). I’ve been using some QuickParts for certificate of service and signature blocks on my own computer. Now I can add the numbering for discovery and re-deploy with the automatic numbering built in. Thanks!!
If you’re a self-taught InDesign user, you may not have been introduced to automatic page numbering, one of the biggest time-saving features in the program. InDesign allows you to set up the page numbering feature in your Master Pages. Then, as you add or shuffle pages, InDesign updates individual page numbers accordingly. You can style the page number any way you like.
I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...
The Artifact ID should NOT be your PK. There is no reason for it to be and to try and use it as such will be a headache. A primary key is simply a unique identifier for a record. Many purists will tell you that users should never see the PK and in your case, I would recommend that. Use an Autonumber as you PK and you can use that as your corresponding Foreign Key in related records. To prevent duplication you can make the combination of Collection Point ID and Artifact ID a unique, multi-field index. Then display the combination as I indicated where you need to show the user a record ID. This is all explained int he blog.
There is only one prerequisite to using the macro: you need to make sure that your document contains a bookmark named Serial. This bookmark should reference the serial number in your document, as you want it to appear in the first printed document. (When you are through running the macro, you can save the document and the serial number will be ready for the next time you want to use it.)
While InDesign veterans may assume everyone already knows this, I can assure you I have worked with very sophisticated documents from designers who did not take advantage of this basic feature. A good rule of thumb to keep in mind as you tackle InDesign challenges is this: If it’s repetitious, tedious, or time-consuming, there’s probably a built-in solution right there in the program. You just need to go look for it.
Occasionally we come across project requirements that include the ability to do sequential numbering in Access on a set of data. We cannot just use the auto-number data type because there is no promise of sequentiality but only uniqueness. In other words, if someone creates a record then later deletes it, there will be a gap in the sequence. So, what are our options? There are actually several ways, each with its pros and cons.
The Renumber/Refresh List toolbar command is used to renumber an existing numbered list or to refresh a list after editing. For example if item 3. is deleted from a list by editing then you can use this tool to refresh the list. You can also use the Renumber/Refresh command to number or renumber a selection of list paragraphs with any chosen starting number.
Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.
Hi Silver, Try going to File/Page Setup/Header-Footer/Custom Header/Should be the button shown in the header box with the # sign in it. Larry -- keithl816 ------------------------------------------------------------------------ keithl816's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=21287 View this thread: http://www.excelforum.com/showthread.php?threadid=498476 ...
I also use InDesign. An Excel file for numbering is easy to create. Then find DataMerge under Automate to link the data file. When you are ready to export, use the create PDF right on the Datamerge window. You can print as cut / stack on the Fiery (or CREO). REMEMBER - if your customer wants them stapled into books of 6 (for example) each stack has to be divisible by 6 if you are going to staple then cut into individual books.
In summary, paragraph numbering is really just an exercise in logic, and this blog post is showing the numbering styles for a very specific project. Your project may be similar, but not exactly the same. You just need to think though the levels and how you want to restart the numbers. I do my best to think it through correctly the first time, set it up, and then try as hard as I can to break it, so that I can find my errors. The good news is that once you get your numbers working, you shouldn’t ever have to think about it again.
Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
I’d like to use this for Exhibits/Appedices. If we refer to the same Exhibit # in a footnote or elsewhere in the document, and then the Exhibit reference is moved, it causes an error in the footnote or reference. Is there a way to cross-reference this, or to have it cross-reference automatically? Lawyers want to use this but I can’t see them bothering to cross-reference the footnotes. Thanks.
A best practice that we recommend to our clients is to create a base/folio master –with styled and positioned footers and current page number special characters– on which all other masters are based. This allows a footer that may contain date or issue information to be updated once and the changes are reflected in all of the master pages. If your masters only have current page number special characters then you can just add them to each master and the page numbers will be reflected when each master is applied to your document pages.
So, as an example, I’ll start with the style linked to the interrogatory in my multi-level list, type my question, hit return and I’ve got the answer space. Return again, another interrogatory ready to go. Wanted request for production instead of interrogatory? Hit the tab key and it switches to the next list level, which is request for production. (I hope I’ve explained this well enough.) sequential numbering in publisher
×