The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
Become a Microsoft Word power user in just a few minutes a week. This tips-based series helps you deepen your proficiency with Word, covering a variety of tools and techniques you can use. Learn how to work with templates, format documents, customize built-in styles and themes, master Track Changes, and more. Check back each week for a new pro tip from expert David Rivers.

GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.

Infinite sequences of digits (or characters) drawn from a finite alphabet are of particular interest in theoretical computer science. They are often referred to simply as sequences or streams, as opposed to finite strings. Infinite binary sequences, for instance, are infinite sequences of bits (characters drawn from the alphabet {0, 1}). The set C = {0, 1}∞ of all infinite binary sequences is sometimes called the Cantor space.
I used multi-level lists for this sort of thing. When defining my list, I type “Interrogatory No.” before the number field in the number format definition, link it to a list style, 2nd level I type “Request for Production No”, link it to another list style. I’ll use “Answer” with no number as another level of the list. Then I modify the linked styles so the paragraphs are formatted how I need. In the styles linked to request for production and interrogatories, I will use the style linked to “Answer” as the style for the following paragraph. In the “answer” style, I’ll use Interrogatory as the style for following paragraph.
This is how I see it. A person (passenger) makes a reservation. If the person has never made a reservation before, then they are added to the passenger table, But it really makes no sense to assign a sequential number to the passenger. Otherwise, an entry, just needs to be made in the reservations table. The Reservation needs to include the specific train (number and date so there should be a table for train schedules so all you need is a foreign key), the passenger and date of travel. Here I can understand wanting a sequential number to show passengers booked in a day.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
Using this script… no. While I use the data merge feature of InDesign often, I avoid the “multiple records” feature, but I typically prepare one record on one page, output the resulting file to PDF and then let the imposing software take care of the page imposition. If page imposition software is something that you don’t have, there is an alternate technique that requires preparing one record on a page, and then using the multipageimporter2.5 script to import them onto a larger sheet. Here is the link to that article: http://colecandoo.com/2011/10/28/theres-more-than-one-way-to-cut-and-stack/
I have several xml files (SMS backup files) I am editing where I want to insert sequential numbering. The number in the id field shown in bold italics below has been replaced with a unique string to allow for a find and replace to be done sequentially giving, e.g. xml a) containing id's 1 to 25, xml b) containing id's 26 to 50, xml c) containing id's 51 to 75 and so on.
Informally, a sequence has a limit if the elements of the sequence become closer and closer to some value {\displaystyle L} (called the limit of the sequence), and they become and remain arbitrarily close to {\displaystyle L} , meaning that given a real number {\displaystyle d} greater than zero, all but a finite number of the elements of the sequence have a distance from {\displaystyle L} less than {\displaystyle d} .
We offer a number of printing solutions for clients around New York. Our speciality is printing club flyers, but we also offer banner printing, signs printing, brochure printing, catalog printing, poster printing, t-shirt printing and more. Along with these, we also offer printing related services like bunting, vinyl printing, die cutting, foil stamping, graphic design and more. We offer shipping to all 48 of the US continental states. Contact us for printing solutions at wholesale prices today!
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!

With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.

I need 2 copies to be printed each time I print from a certain file. Is there any way to save this command so I don't have to change the number of copies each time I print? Hi you could record a macro while doing this manually and assign a shortcut or button to this recorded macro -- Regards Frank Kabel Frankfurt, Germany Hebert45 wrote: > I need 2 copies to be printed each time I print from a certain file. > Is there any way to save this command so I don't have to change the > number of copies each time I print? ...


Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
This will work OK for a small set of data, but the more data there is, the more intensive the subquery becomes, and it must be called repeatedly for each row. This is one of those rare cases where doing it in VBA is faster than doing it in SQL — after all, row numbering is fundamentally iterative, not set-based which just goes against the grain of what SQL was designed to do – solve a problem in a set-based fashion, non-iterative fashion.
There are three settings we need to embed in this field. The first is to tell it what kind of numbering we want to do (in this case, “First, Second, Third”), what case we want to use (upper case, title case, etc.), and a switch to tell Microsoft Word to increment the numbers. Click each of these settings as shown below, being sure to click Add to Field after each one:
Even worse (I found out from bitter experience), is that whenever a computer “glitch” (aka “crash”) or “upgrade” (e.g. to a new/different desktop) came along, and our outside IT vendor had to “fix” the “computer” or “system,” (always, of course, at unexpected and unpredictable times), all of my “Auto Text” blocks got “wiped out” (or, I could not find them, even after a few help desk calls), and I had to “reinvent” and “re-keystroke” or “re-save” each of them again (and several times, again). Obviously, frustrating, and largely defeating the efficiency purpose.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document.
Normally, the term infinite sequence refers to a sequence that is infinite in one direction, and finite in the other—the sequence has a first element, but no final element. Such a sequence is called a singly infinite sequence or a one-sided infinite sequence when disambiguation is necessary. In contrast, a sequence that is infinite in both directions—i.e. that has neither a first nor a final element—is called a bi-infinite sequence, two-way infinite sequence, or doubly infinite sequence. A function from the set Z of all integers into a set, such as for instance the sequence of all even integers ( …, −4, −2, 0, 2, 4, 6, 8… ), is bi-infinite. This sequence could be denoted {\displaystyle (2n)_{n=-\infty }^{\infty }} .
Set up a matrix in Excel, one column for each ticket position (stack) and one row for each sheet, plus one for field names. Fill the first column down in consecutive order, then the second, starting where the first column leaves off, and so on. Afet a couple of columns are filled, you can auto fill across the rows, too, so the whole thing takes only a couple of minutes. Name the stacks and use a different field for each position on the page when you do the merge. The trick is to set up using a custom file for the total number of tickets or whatever, divided into the correct number of stacks and sheets.
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!
I have a problem with Outlook 2007 and the add-in Access Outlook Add-in for Data Collection and Publishing. This add-in worked when I first installed Outlook 2007 when installing Office 2007 Enterprise. The add-in created a sub-folder in my Inbox named Data Collection Replies and worked well until about 6 weeks ago. Now I can’t get the add-in to work at all even though it appears in the list of COM.adds in Outlook 2007. More perplexing is the error message I now receive EVERY time I click on any email message to read it. The message is titled ‘Custom UI Runtime Error in... sequential numbering
×