It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).
Is there a way to have page numbering span multiple worksheets in a file? I would like to be able to print all the worksheets in a file and have the page numbers in the second worksheet pick up where the page numbers in the first worksheet ended without having to manually adjust the start point in worksheet 2. Please response back to the group. Thanks. JWeinberg I assume the page numbers are set up in your header/footer. If this is correct then all you need to do is select all the sheets you want to print by clicking on each sheet tab while holding down the control key. This will the...
Creating a sequential list of numbers, in Word, sounds like an intimidating task. Sure, you can create a numbered list quickly enough, but that feature works with additional text - you're numbering something. If you want a list of just numbers, you have to work a bit harder. Word's SEQ field might come to mind, but that solution is better suited to template-type numbering. In order words, this field works great if you're numbering documents, labels, and so on. It doesn't work so well if you just want to create a list of sequential numbers. You can use it that way, but it'll be more work than it's worth.
It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).

### So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.
I need to add 4 "technical contact" fields (which would lookup the Contact entity) to the CONTRACT form. Is this possible? I've found it difficult to figure out what to do first. Thanks in advance, Brandon Not possible. You cant have multiple lookups for the same entity. You also cannot create new relationships between two system entitites. This will work in 4.0 Not possible, Pezman. N:M relationships are not possible in 3.0 yet. There is a alternative solution: a new entity to act as an N:M relationship. In your case, Contract/Contact. This entity has two 1:N relations...
Other examples of sequences include ones made up of rational numbers, real numbers, and complex numbers. The sequence (.9, .99, .999, .9999, ...) approaches the number 1. In fact, every real number can be written as the limit of a sequence of rational numbers, e.g. via its decimal expansion. For instance, π is the limit of the sequence (3, 3.1, 3.14, 3.141, 3.1415, ...). A related sequence is the sequence of decimal digits of π, i.e. (3, 1, 4, 1, 5, 9, ...). This sequence does not have any pattern that is easily discernible by eye, unlike the preceding sequence, which is increasing.
flex printing machine water transfer printing machine canvas printing machine 3d t-shirt printing machine large format printing machine vinyl printing machine expiry date printing machine cd printing machine used flex printing machine poster printer machine cake printing machine poster printing machine sticker making machine vinyl sticker printing machine wall printing machine More...
Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
Hi, As a new user to excel I am thinking of setting up a data base of my music. The total number of tracks is in excess of 70,000. I have seen a simple solution using excel which would be ok but I'm not sure if I can have 70,000 rows in one work sheet. A friend has suggested access which I am not familiar with and don't know if this will allow 70,000 entries. Can anyone please tell me what the maximum numbers are in both access and excel 2003. Cheers Glinty Max in Excel 2003 is 65536 (in one sheet) whereas Access only limit is your memory -- Regards, Peo Sjoblom ...
I removed the required setting on the table level. The form does not give me an error message now, but does not close on its on. I closed it via a command then looked at the Design Projects table to see if the new record, #896, shows up. A new record is there, with all the entered data EXCEPT the very important field of the Project ID. That field is blank.
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
I want to have textbox with 2 columns with footnotes running across the bottom of those columns in one column. ID CS3 footnotes can’t handle this. So I have added fake footnote refs in the doc. using this idea. Now the footnotes themselves I can create in another text frame and use this idea again to create them and then manually place them at the bottom of the page. The only problem however with this is the FN options carrry across the whole doc. right? So even if I create a second doc for the footnotes themselves with different options and then later paste it into the main doc it’ll get messed up right?
Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...


Word includes a special sequencing field that you can use to do all sorts of numbering. You can even use the SEQ field to help create broken numbered lists. (A broken numbered list is one in which the flow of the list is interrupted by paragraphs of a different format.) This approach to creating numbered lists is particularly helpful and much less prone to the problems inherent in Word's built-in list numbering. For the purposes of this tip, the format of the sequence field is as follows:

## If you prefer, you can use a macro to print out your numbered copies. For instance, the following macro asks you how many copies you want to print, along with the starting copy number to use. (This comes in real handy if you print 25 copies, and then someone asks you to print a second batch of 10, numbered 26 through 35.) The macro also stores the last copy number between sessions, so that it is used as the default when you next run the macro.

Even worse (I found out from bitter experience), is that whenever a computer “glitch” (aka “crash”) or “upgrade” (e.g. to a new/different desktop) came along, and our outside IT vendor had to “fix” the “computer” or “system,” (always, of course, at unexpected and unpredictable times), all of my “Auto Text” blocks got “wiped out” (or, I could not find them, even after a few help desk calls), and I had to “reinvent” and “re-keystroke” or “re-save” each of them again (and several times, again). Obviously, frustrating, and largely defeating the efficiency purpose.
A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.
OK, First, you need to reread the blog. You should NOT be storing the Transaction_ID. It is a calculated value. Second, your naming is what confused me. Your Passenger table should have an autonumber PassengerID. That PassengerID should be the Foreign Key in your Reservations table. Your servation table should also have an autonumber for ReservationID. I really don’t see why you need sequential numbering in the passenger table. I can understand it in the Reservations table, but not in the passenger table. Also, I don’t see any reason for a transaction date in the passenger table. I can understand a CreateDate for when the passenger signed up.
Perhaps your explanation already addresses this, but I can’t see it. Is there any way this script can be used for printing multiple-up in numeric sequence? For example, if I’m running 1000 postcards 4-up (on 250 sheets). I need the 4 cards on page 1 to be numbered 1, 251, 501, 751; then the 4 cards on page 2 numbered 2, 252, 502, 752; etc., so that when the sheets come out of the printer and are cut into 4, I have a stack of 1-250, a stack of 251-500, a stack of 501-750 and a stack of 751-1000.


After the { SEQ € \r68}, insert just the { SEQ € } fields where you need them for the sequential numbering. If you copy and paste one of these fields, you'll probably need to select in and press F9 to update it, or you could press Ctrl-A, F9 to update all fields in the document - useful if you've added/deleted one in an existing sequence or if you're adding multiple such fields.
Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.
There are a couple of ways you can set up Word 2007/2010 to use SEQ fields for numbering — you can set them up as AutoCorrect entries or as Quick Parts. Both ways work; the method you choose is up to you. This long article describes how to create the SEQ fields and the numbering style in your Normal.dotm template; how to save the SEQ fields as AutoCorrect entries in Word 2007/2010 (and how to use them); and how to save (and use) them as Quick Parts. The most consuming part of this process is settings up the fields and the style; once they’re set up, using them is super easy.
There is only one prerequisite to using the macro: you need to make sure that your document contains a bookmark named Serial. This bookmark should reference the serial number in your document, as you want it to appear in the first printed document. (When you are through running the macro, you can save the document and the serial number will be ready for the next time you want to use it.)
I need to add 4 "technical contact" fields (which would lookup the Contact entity) to the CONTRACT form. Is this possible? I've found it difficult to figure out what to do first. Thanks in advance, Brandon Not possible. You cant have multiple lookups for the same entity. You also cannot create new relationships between two system entitites. This will work in 4.0 Not possible, Pezman. N:M relationships are not possible in 3.0 yet. There is a alternative solution: a new entity to act as an N:M relationship. In your case, Contract/Contact. This entity has two 1:N relations...
An easier way is to setup the table in Excel and use the Excel features to create sequential numbering. The cells making up the whole table can then be selected and copied into a Word document using CTRL/C and CTRL/V which will create a table in Word. Column widths and borders can be set up in Excel and cells can be filled in before copying to the Word document.
Budget is our income and sometimes this is positive. I need to make this column in a query all negitive values. I am using the IIf function but it is not working. Budget: [budget_amount] IIf ([budget_amount] >=0, [budget_amount]*-1, [budget_amount]) or is there another function I could use? On Mon, 29 Oct 2007 19:18:00 -0700, Tamm Fox wrote: > Budget is our income and sometimes this is positive. I need to make this > column in a query all negitive values. > > I am using the IIf function but it is not working. > > Budget: [budget_amount] IIf ([budget_amount] &g...
I have screen shots of what I have in my db, where can I send it to you (it is in word format) so that you can take a look at it to see what I am doing wrong. I took a screen shot of what is listed for the button and I took a screen shot of the text box Job No. I don’t know how to bound anything other than put the code behind the button and putting the Job_No in the code as you stated. I understand what you are saying, but I thought if I put the text box name Job No in the code behind the button then it would be bound to my table with the Job No field. Heeeelllllppppp!!!! I am sorry that I can’t seem to grasp this….but appreciate all of your help!
I have a cell which has a basic formula in (adding up from 2 other cells) This number can end up being a minus number (-167), If this happens I need to be able to make that minus number appear as a zero (0). Is this possible? please help. =IF(A1+B1<0,0,A1+B1) Alternative =MAX(0,A1+B1) Gord Dibben Excel MVP On Sat, 7 May 2005 08:28:03 -0700, "marcus1066" wrote: >I have a cell which has a basic formula in (adding up from 2 other cells) >This number can end up being a minus number (-167), If this happens I need to >be...
##### Thanks for the quick reply, I think I’m a little confused by the Display aspect of this. Artifact ID is a primary key to the table I am working in and I need it to have a unique identifier that other people can search for. The previously adopted naming convention for this ID is that which I mentioned before, Collection Point ID plus a period and then a sequential number restarting at each new Collection Point ID i.e 2-1050.1, 2-1050.2, 2-1060.1 and so on. So I think I actually need to save this in the Artifact ID field. I realize this might be slightly redundant but I’m not sure how the display would work as far as searching for specific Artifact IDs in the future.

You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
Next we will look at scenario 2. The variation here is that Apex wants to start each year with anew sequence of numbers. Also, they want to include the year when displaying this number. We still use a DMax, but we need to add criteria to determine the year. So Apex needs to have a field in their table that indicates the date. Generally, such inquiries will have a date/time stamp to indicate when received or the user will input the date and time. So we will assume there is a field in record called InquiryDate. We will also add an Integer field named Sequence. On the form we will add a control bound to Sequence, but set its Visible property to No. The line of code will look like this: