An InDesign document can only have one chapter, and these chapters are typically combined in an InDesign book. To insert a chapter number, create a text frame where you want the chapter number to appear on either a document or master page. Click on the "Type" menu, then "Text Variables," "Insert Text Variable" and then "Chapter Number." Update the chapter number if necessary to keep your chapter numbers consecutive by clicking on "Numbering & Section Options" in the Layout menu.
There are three settings we need to embed in this field. The first is to tell it what kind of numbering we want to do (in this case, “First, Second, Third”), what case we want to use (upper case, title case, etc.), and a switch to tell Microsoft Word to increment the numbers. Click each of these settings as shown below, being sure to click Add to Field after each one:

I’m not sure which version of InDesign first introduced printing Thumbnails like this, but even if yours doesn’t support that, your printer driver may have a similar feature of its own. Check the printer’s own dialog box by clicking “Setup…” near the bottom left corner of the Print dialog and dismissing the warning, then clicking “Preferences…” in Windows’s Print dialog that comes up (I’m not sure how to access this on Mac OS X, but I’m pretty sure there’s an easy way). For instance, on many HP printers, the feature you want is called “Pages per sheet” and has a drop-down offering 1, 2, 4, 9, or 16 pages per sheet.


I removed the required setting on the table level. The form does not give me an error message now, but does not close on its on. I closed it via a command then looked at the Design Projects table to see if the new record, #896, shows up. A new record is there, with all the entered data EXCEPT the very important field of the Project ID. That field is blank.
Hello, When I enter 100, it display 1, When I enter 1000, it display 10, ChefChaudart, Is that bad ? That is one of those things that everyone runs into you change the option and it doesn't seem to do anything so you leave it changed. If you enter a decimal point everything is normal i.e. 1000. or 1000.50 but if you fail to enter a decimal point your option in Tools, Options, Edit (tab), [x] fixed decimals 2 will be used. Remove the checkmark and you'll be fine. You can try that on your boss at April Fool's time as long as their not doing your sal...
Hello, can anyone help me with making serial numbers in this way: When I purchase 10 chairs, I want to monitor all of it by having serial numbers each of those 10 and those 10 numbers should have the prefix “CHR-” if they are chairs. “TBL” if tables, the codes are associated with the item category. BTW, items have categories predefined by beforehand on the items by relationships. So when I will want to monitor these 10 chairs, I will only have to click the “generate control numbers” button and each of those purchased items get their own control numbers.
The Renumber/Refresh List toolbar command is used to renumber an existing numbered list or to refresh a list after editing. For example if item 3. is deleted from a list by editing then you can use this tool to refresh the list. You can also use the Renumber/Refresh command to number or renumber a selection of list paragraphs with any chosen starting number.
If {\displaystyle (a_{n})} is a sequence of complex numbers rather than a sequence of real numbers, this last formula can still be used to define convergence, with the provision that {\displaystyle |\cdot |} denotes the complex modulus, i.e. {\displaystyle |z|={\sqrt {z^{*}z}}} . If {\displaystyle (a_{n})} is a sequence of points in a metric space, then the formula can be used to define convergence, if the expression {\displaystyle |a_{n}-L|} is replaced by the expression {\displaystyle {\text{dist}}(a_{n},L)} , which denotes the distance between {\displaystyle a_{n}} and {\displaystyle L} .
Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
It will ask for the number of copies that you want to make and sequentially number each copy.The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.

I have screen shots of what I have in my db, where can I send it to you (it is in word format) so that you can take a look at it to see what I am doing wrong. I took a screen shot of what is listed for the button and I took a screen shot of the text box Job No. I don’t know how to bound anything other than put the code behind the button and putting the Job_No in the code as you stated. I understand what you are saying, but I thought if I put the text box name Job No in the code behind the button then it would be bound to my table with the Job No field. Heeeelllllppppp!!!! I am sorry that I can’t seem to grasp this….but appreciate all of your help!
Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.

There’s an old Steve Martin joke about how to make a million dollars which starts, “First, get a million dollars…” That’s the key to this trick, too: First, get a bunch of numbers. Here’s a file with 1,197 numbers in it. Now import or paste those numbers into a thread so that the numbers appear in the right place. If you need two matching numbers, just import it twice.


Perhaps your explanation already addresses this, but I can’t see it. Is there any way this script can be used for printing multiple-up in numeric sequence? For example, if I’m running 1000 postcards 4-up (on 250 sheets). I need the 4 cards on page 1 to be numbered 1, 251, 501, 751; then the 4 cards on page 2 numbered 2, 252, 502, 752; etc., so that when the sheets come out of the printer and are cut into 4, I have a stack of 1-250, a stack of 251-500, a stack of 501-750 and a stack of 751-1000.
I am having trouble with this procedure. My situation is almost identical to example #2. I want to populate RecordNumber on my form with a date number like “130001, 130002, etc.” where “13” is the year based on a date automatically generated in the OpenDate field in tblLogRecords. OpenDate is a date/time type field that has a default value of the date the record is created and is not editable. I have added a field called Sequence to tblLogRecords and it is a Number, Long Integer type. I also created a bound control for Sequence on my form. I have a completely separate autonumber field as the PK.

I have a problem with Outlook 2007 and the add-in Access Outlook Add-in for Data Collection and Publishing. This add-in worked when I first installed Outlook 2007 when installing Office 2007 Enterprise. The add-in created a sub-folder in my Inbox named Data Collection Replies and worked well until about 6 weeks ago. Now I can’t get the add-in to work at all even though it appears in the list of COM.adds in Outlook 2007. More perplexing is the error message I now receive EVERY time I click on any email message to read it. The message is titled ‘Custom UI Runtime Error in...
Normally, the term infinite sequence refers to a sequence that is infinite in one direction, and finite in the other—the sequence has a first element, but no final element. Such a sequence is called a singly infinite sequence or a one-sided infinite sequence when disambiguation is necessary. In contrast, a sequence that is infinite in both directions—i.e. that has neither a first nor a final element—is called a bi-infinite sequence, two-way infinite sequence, or doubly infinite sequence. A function from the set Z of all integers into a set, such as for instance the sequence of all even integers ( …, −4, −2, 0, 2, 4, 6, 8… ), is bi-infinite. This sequence could be denoted {\displaystyle (2n)_{n=-\infty }^{\infty }} .

The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
I've managed to edit one using Find and Replace with an { SEQ } field as the replacement to give sequential numbering. This started from 1 which is fine. Subsequent xml's where I've tried to use { SEQ \r n } to get numbering starting from other than 1 results in multiple occurrences of the number as defined by n. It's this way even after updating the fields.
There are also other problems – for one thing, it’s not a very generic solution. You must customize several parts to work for different queries. If the set of tables used in the outermost FROM clause are different, to be the innermost FROM clause, you have to adjust the WHERE clause to reference the correct primary key (or some combination thereof). Then you have to also keep the ORDER BY in sync. That’s a lot of tweaks if you want to use it for different queries. That is why this is the last method listed here but it is one possible solution.
First, you have to use YOUR field and control names. The ones I use are samples. The error you are getting indicated you do not have a control named txtProject. So you have to substitute the correct name of the control. bound to the ProjectID field. By the way it is not a good idea to the octothorpe(#) as part of a field name. A controlname may be different from a fieldname. The name property of a control is on the Other tab in the Properties dialog.
The best way to do this is to use a primary key. In cases where a query is complex and joins several tables, we may need to use the primary key of the table that’s on the bottom of the relationship hierarchy or possible a concatenation of multiple tables’ unique key so that the expression will be unique and thus we can identify which sequential number we have assigned.
Rush Flyer Printing offers sequential numbering printing services. We ensure that highest standard of quality is maintained throughout the project to ensure accuracy. We use modern technology and state-of-the-art equipment to ensure that the printing gets done with highest quality standards. We understand that most business today require fast turnaround time and hence offer same day printing solutions for various products. We can even offer same day store pick up for clients from Long Island and New Jersey.
But we won’t be stopping at just using a field code to increment the numbers. I’m also going to show you how to save the text (“Interrogatory No.” etc.) that precedes each number as an AutoText entry. That means you’ll be able to type just four letters and hit the Enter key (those are the “5 keystrokes” promised above) and Word will finish the phrase for you, complete with the sequence code to increment the discovery request number for you.
After the { SEQ € \r68}, insert just the { SEQ € } fields where you need them for the sequential numbering. If you copy and paste one of these fields, you'll probably need to select in and press F9 to update it, or you could press Ctrl-A, F9 to update all fields in the document - useful if you've added/deleted one in an existing sequence or if you're adding multiple such fields.
One solution is to format the heading with the style and follow it with a hidden paragraph mark. You should format the text in the next paragraph with a style that is not included in the Table of Contents. A hidden paragraph mark keeps the text together on one line when it is printed, even though it is actually two separate paragraphs. The Table of Contents command picks up only those paragraphs with heading styles and places them into the Table of Contents.
 	Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.

Layout your ticket in InDesign, one on each page, using the Page Number function to number the tickets. If you have something like Imposer Pro (I know it doesn't work from InDesign CS3) you can, for instance, impose the pages 4up consecutive and get 4 tickets on an A4. Alternatively, make a PDF of the whole document and impose (manually, if you have to), the advantage here is that this can work as a template for other tickets, simply make a new PDF of the same size and update the PDF in the template document every time you have a new raffle ticket to do.
But we won’t be stopping at just using a field code to increment the numbers. I’m also going to show you how to save the text (“Interrogatory No.” etc.) that precedes each number as an AutoText entry. That means you’ll be able to type just four letters and hit the Enter key (those are the “5 keystrokes” promised above) and Word will finish the phrase for you, complete with the sequence code to increment the discovery request number for you.
I tossed back a rather glib answer about using the AutoNumLgl field code to number the discovery requests, and she threw in this little wrinkle: her attorneys like to play mix-and-match with their discovery. In other words, they may put in a couple of interrogatories, then throw in a related request for production, then another interrogatory, then a request for admission that’s related to that interrogatory.

Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
Here, the field code SEQ is the winning choice. SEQ is a sequence numbering code often used for things like figures or illustrations (think “Figure 1”). What makes it an ideal choice here is the ability to name each sequence separately. In other words, we can define one numbering sequence for interrogatories, another one for requests for production, and a third one for requests for admission. Microsoft Word will be able to keep each numbering sequence separate because each will have a distinct name.
Rhonda, Thank you for your amazingly quick and thorough reply! You are correct, Word does the Table and Figure numbering splendidly. I was trying to reference those numbers in the text, which I see is a function done quite well in Word using Cross Reference: ‘In Word 2007 and 2010: Display the References tab. In the Captions group, click on the Cross-reference button.’ Thanks again, Joshua.
Any code can read the serial number of a mother board? any example? Thanks! Crystal On Fri, 10 Jun 2005 00:07:16 +0800, "Crystal Lin" wrote: >Any code can read the serial number of a mother board? any example? Thanks! > Do all computers have "mother boards" and do all mother boards have serial numbers? > Any code can read the serial number of a mother board? any example? Thanks! You can read the Serial Number of the hard drive using DiskId32 at http://www.winsim.com/diskid32/diskid32.html . Lynn Let me guess: another mis...
Scott, trying my best to have sequential numbering almost identical to your scenario 1 (bound control on input form which increments last number by 1). Where do I enter this code? I have a form which opens and is ready for entry of new Project Designs. I want to show in the control box the next Project ID (a number) so do I place the code, Me.txtProject ID = Nz(DMax(“[Project ID]”,”DESIGN PROJECTS”),0)+1, under On Load, After Update, or where? And also, the Me.Dirty = False or DoCmd.RunCommand
×