There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.
No matter how light the file might be, if you need 1000 units, that means you send a 1000-page file to the printer if you use Data Merge, that is not as efficient as sending one page and 1000 numbers to insert in the print stream, but to do that you need a plugin, which is what that page Bob directed you is leading up to. I've never used the program Harbs has mentioned, but he's a pretty smart guy and if he says it works well, I'd take a look.
I tossed back a rather glib answer about using the AutoNumLgl field code to number the discovery requests, and she threw in this little wrinkle: her attorneys like to play mix-and-match with their discovery. In other words, they may put in a couple of interrogatories, then throw in a related request for production, then another interrogatory, then a request for admission that’s related to that interrogatory.
Occasionally we come across project requirements that include the ability to do sequential numbering in Access on a set of data. We cannot just use the auto-number data type because there is no promise of sequentiality but only uniqueness. In other words, if someone creates a record then later deletes it, there will be a gap in the sequence. So, what are our options? There are actually several ways, each with its pros and cons.
There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.

* The solution assumes that there is only one stack to cut, but really there could be dozens of stacks. Take a run of the numbers 1-10000 for example. Let’s say you get 4-up on a sheet and the biggest stack that will fit in the guillotine is 500 sheets. A true cut and stack solution will print on the first stack 1-500, 501-1000, 1001-1500, 1501-2000. Ideal because the numbers can be guillotined and placed back onto a pallet for its next process. It also means I can provide these numbers first to the client and then they can wait for the other numbers (in case they had run out of stock and were in a hurry for replenishment stock). The solution doesn’t do that – instead, the first 500 stack will have the numbers 1-500, 2501-3000, 5001-5500, 7501-8000. That means not only is placement back onto the pallet confusing, but the customer has to wait for the artwork to be completely printed before even getting the first half of numbers. True, I could run the script several times to get the appropriate stacks, but why should I if the script did what I wanted? Especially if there are hundreds of stacks to print?
Typically the second option of saving as a CSV file is the one to choose for use with Data Merge. Click the create button to choose a file name and location, make sure that a header has been assigned and click OK. This creates the CSV file that contains the sequential numbers that can then be used in a Data Merge by opening the Data Merge palette, clicking the flyout and clicking Select Data Source…
OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.
You can add many of these items by using text variables. InDesign includes several preset variables, such as Creation Date and File Name. You can modify these variables, and you can create your own. For example, you can create a variable that displays the first use of a Heading paragraph style in the header or footer. Once you create or edit the variables you need, you assemble them on the master page to create your header and footer, and then you apply the master page to the appropriate document pages.
Infinite sequences of digits (or characters) drawn from a finite alphabet are of particular interest in theoretical computer science. They are often referred to simply as sequences or streams, as opposed to finite strings. Infinite binary sequences, for instance, are infinite sequences of bits (characters drawn from the alphabet {0, 1}). The set C = {0, 1}∞ of all infinite binary sequences is sometimes called the Cantor space.
John, Sorry for the delay, but I was away last week with limited Internet access. I assumed if you had a Save button, you would know how to put code behind it. To see the code behind a button, Select the button in Form Design Mode and open the Properties Dialog (Right click and select properties), on the Events tab there should be something in the On Click event of the button. If you click the Ellipses […] next to the event, it will open Code Builder where you can enter the code.
I make the design with as many up as I need on the master page, linking the frames where the numbers will go. Then I make the list using Excel, copy paste to ID and apply a paragraph style with "start in next frame" option. Click the outbox on the pasted text to get a loaded cursor and delete the frame. Then just shift-click over the first textframe on a live page to have as many "tickets" added as needed automatically.
Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...
Is there a way to have page numbering span multiple worksheets in a file? I would like to be able to print all the worksheets in a file and have the page numbers in the second worksheet pick up where the page numbers in the first worksheet ended without having to manually adjust the start point in worksheet 2. Please response back to the group. Thanks. JWeinberg I assume the page numbers are set up in your header/footer. If this is correct then all you need to do is select all the sheets you want to print by clicking on each sheet tab while holding down the control key. This will the...
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
So if you encountered this problem, then you didn’t follow the instructions completely (which is OK) and appear to be automatically generating the number whenever the record is accessed. If that’s the case, then you are risking duplication because you are not saving the generated number immediately. Rather then try to test if a number already exists as you seem to be doing, you should not automatically generate the number, but trigger the generation from some action in the form.
You can control whether your next paragraph number continues the current sequence or starts again at 1 within that same right-click menu. If one of your numbers gets out of sequence, simply right-click and choose Continue Numbering. If you want to force the number back to the beginning (say, you’re switching from interrogatories to requests for production), choose Set Numbering Value (which will also give you the option of continuing the previous list).
I am trying to use mailmerge to print tickets. I tried using a column of sequential numbers on a spreadsheet and inserting that as a field into the mailmerge, but oddly, it used number 8 eight times on the first page, number 16 eight times on the second page, etc. So, I tried using a sequencing field as you describe. It worked great for the first page (numbers 1-8) but when I completed the mailmerge, it repeated numbers 1-8 on each successive sheet. What do I have to do to make this work in a mailmerge?
There is very simple solution that we use and that is to lay out the sheet say 6 up on a A4 sheet as a master page and in document setup set the number of pages to 1,000 if that is the amount you require. Put a page number on each ticket on the page and although they will all have the same number on each page, we put the the first two letters of the customers business name before each number followed by the letters of the alphabet so it then reads for example BT1A, BT2A, BT3A, BT1B, BT2B, BT2C and so on as each page is printed.

I am trying to split a single cell into 2 rows can you help If I understood correctly you want to enter an entry in two lines in a cell at appropirate place hit lt+enter and again hit enter for e.g venkat (alt+enter) raman(enter) "trev" wrote in message news:89B2C15C-057F-43B9-8282-37923D5EA397@microsoft.com... > I am trying to split a single cell into 2 rows can you help ...
Thanks for the quick reply, I think I’m a little confused by the Display aspect of this. Artifact ID is a primary key to the table I am working in and I need it to have a unique identifier that other people can search for. The previously adopted naming convention for this ID is that which I mentioned before, Collection Point ID plus a period and then a sequential number restarting at each new Collection Point ID i.e 2-1050.1, 2-1050.2, 2-1060.1 and so on. So I think I actually need to save this in the Artifact ID field. I realize this might be slightly redundant but I’m not sure how the display would work as far as searching for specific Artifact IDs in the future.
As you can see, the sequence name can be most anything (e.g. mySeq, A, B, or Bob's_your_uncle). If you start a sequence with a new sequence name the numbering restarts with 1. Look at Mary's first chore in the right hand column. Here you see the reset switch \r1 was used. This switch directs Word to restart the sequence named "A" with "1" at this point.
Set up a matrix in Excel, one column for each ticket position (stack) and one row for each sheet, plus one for field names. Fill the first column down in consecutive order, then the second, starting where the first column leaves off, and so on. Afet a couple of columns are filled, you can auto fill across the rows, too, so the whole thing takes only a couple of minutes. Name the stacks and use a different field for each position on the page when you do the merge. The trick is to set up using a custom file for the total number of tickets or whatever, divided into the correct number of stacks and sheets.
If you’re producing any kind of numbered items in-house that are multiple-up on a sheet where you need to control all the variables to meet your production needs, the autonumbering feature through numbered lists is the way to go! Just step and repeat away & InDesign will do all the work. No need to fool with a seperate “numbers” file or deal with a data merged document. I think it’s by far the best option for basic numbering.
You’ve got some tips to help make your raffle more successful. You’ve got several free Word ticket templates to choose from. You know how to sequentially number tickets in two different ways. All that is left for you to do is go sell those tickets, have the draw, and then feel good about helping someone out. All for pennies on the dollar over ordering custom made tickets.
I’ve been searching for the best way to create auto numbering for discovery requests: dare I say in WordPerfect I had the most amazing macros that used “counter” and creating a set of discovery was a snap. I’ve struggled to find something workable in Word. Some people use Discovery Request No. X – Interrogatory; others use Interrogatories No. X, Requests for Production No. X, Requests for Admission No. X throughout a set of discovery. There has to be a way to do this in Word, and I’ve tried several different approaches, none of which worked out that well. Would you please steer me in the right direction? Thanks very, very much.
If you’re a self-taught InDesign user, you may not have been introduced to automatic page numbering, one of the biggest time-saving features in the program. InDesign allows you to set up the page numbering feature in your Master Pages. Then, as you add or shuffle pages, InDesign updates individual page numbers accordingly. You can style the page number any way you like.
Microsoft Publisher, the desktop publishing component of the Professional version of the Office Suite, can perform many time-saving tasks for busy business owners, including layout and design work. It can even help you avoid a shopping run to try to find tickets for your next employee picnic, holiday giveaway or executive board meeting. Create your own tickets, including the vital sequential ordering needed for raffles or attendance tracking, using Publisher’s page numbering. With a few tricky manipulations of the page number process, you can start running the numbers in an entirely new fashion.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
I want to a sequential number to fill in automatically each time the form is filled out. Malissa, A simple way would be to use something like this, you could assign it to a button, an open or before print event. Sheets("Sheet1").Range("A1").Value = _ Sheets("Sheet1").Range("A1").Value + 1 For other ways to do this or if this is going to be used in a temple have a look here http://www.mcgimpsey.com/excel/udfs/sequentialnums.html -- Paul B Always backup your data before trying something new Please post any response to the newsgroups so others...
For the purposes of this article, we define a sequence to be a function whose domain is an interval of integers. This definition covers several different uses of the word "sequence", including one-sided infinite sequences, bi-infinite sequences, and finite sequences (see below for definitions). However, many authors use a narrower definition by requiring the domain of a sequence to be the set of natural numbers. The narrower definition has the disadvantage that it rules out finite sequences and bi-infinite sequences, both of which are usually called sequences in standard mathematical practice. In some contexts, to shorten exposition, the codomain of the sequence is fixed by context, for example by requiring it to be the set R of real numbers,[2] the set C of complex numbers,[3] or a topological space.[4]
Hello, can anyone help me with making serial numbers in this way: When I purchase 10 chairs, I want to monitor all of it by having serial numbers each of those 10 and those 10 numbers should have the prefix “CHR-” if they are chairs. “TBL” if tables, the codes are associated with the item category. BTW, items have categories predefined by beforehand on the items by relationships. So when I will want to monitor these 10 chairs, I will only have to click the “generate control numbers” button and each of those purchased items get their own control numbers.
Hello! I already have automatic numbering set up (to change paragraph numbers automatically when paragraphs are moved within a document) but I would also like to have automatic lettering within the same document that is independent from the numbering. Example, paragraph 1 references Exhibit A, paragraph 2 references Exhibit B, so on and so forth. Currently using the above referenced method, the auto numbering lettering then follows as if the letters are a representation of the corresponding number (if that makes sense), ex: 1 B 3 C 5 D. How do I have the number sequencing independent from the letter sequence? Thank you in advance!
×