Thanks for the quick reply, I think I’m a little confused by the Display aspect of this. Artifact ID is a primary key to the table I am working in and I need it to have a unique identifier that other people can search for. The previously adopted naming convention for this ID is that which I mentioned before, Collection Point ID plus a period and then a sequential number restarting at each new Collection Point ID i.e 2-1050.1, 2-1050.2, 2-1060.1 and so on. So I think I actually need to save this in the Artifact ID field. I realize this might be slightly redundant but I’m not sure how the display would work as far as searching for specific Artifact IDs in the future.
Scott, I was able to try this as I assumed that is what I needed to do. It does not work. First, the current macro for that button is a Save Record, Close Window operation. How could I keep this and also add Code? If I just add a new button to the form and under the On Click Event put the code you suggested, I get a compile error of “method or data member not found” and ” .txtPROJECT” is highlighted. The actual field is “PROJECT ID#” and it is a long integer number. Entry I have is: Private Sub Command88_Click()
We use the auto page numbering trick here, the trick is to do it as spreads. You just make your pages the same size as the ticket with crops and bleeds. Then set up the shell on the master page and place your auto page number where you want your numbers. Each pages is the next number. You can also have two sets of numbers for perforated ticket. You then can use the page start options to add to the numbers and keep the same number of total numbers. For example you would do a new page start after number 99. 0001 to 0099 so it doesn't add two "0's" to the front of 100 and you get 00100 when you want 0100. Works great for small quantities, we have done up to 1000+ tickets and once you do it once or twice it is a snap to set up. To avoid having to do 1000 pages just send the tickets in groups. Usually between 25 to 100 at a time works good depending on artwork file size. Just save each time before sending to printer and name the file with what the tickets are. Like "MyTickets-0001-0100.Indd". Makes it easier to go back if you have a problem. You can even do two rolls of tickets if your using 12 x 18 sheets by flipping the sheet and doing one row along the top and one along the bottom on reverse side. That is if your ticket is single Sided. Two sided tickets are a bit trickier. :-)
If {\displaystyle (a_{n})} is a sequence of complex numbers rather than a sequence of real numbers, this last formula can still be used to define convergence, with the provision that {\displaystyle |\cdot |} denotes the complex modulus, i.e. {\displaystyle |z|={\sqrt {z^{*}z}}} . If {\displaystyle (a_{n})} is a sequence of points in a metric space, then the formula can be used to define convergence, if the expression {\displaystyle |a_{n}-L|} is replaced by the expression {\displaystyle {\text{dist}}(a_{n},L)} , which denotes the distance between {\displaystyle a_{n}} and {\displaystyle L} .
I need a way for the priority level to automatically adjust when I add or change an item with a new priority level. I might have 6 tasks, each will have a different priority. If I add one and set it to 1, the others need to increment + by one digit. Adding one to the above the highest would see no change in the others. Adding one in the middle would spread the rest apart (e.g. I have a 3, I put a new record and put it at 3, the old 3 becomes 4, and so on (everything below it would increment one digit).
Ok, generating a random 3 digit number is a whole different thing, so I’m not going to go into that. If you want your numbers to start at 100 (to insure three digits) then change the 0 to 99. The Nz function will return the value listed if the field is Null. So the first time you execute that code, the DMax should return a Null since no numbers have been generated for the PONum field. The Nz will then substitute 99 and then increment that by 1. You can accomplish something similar by just entering 100 as the PONum for one record. .

we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...

Drag the number, which Publisher defaults to “1,” into place on the ticket. To change the sequence, such as to start with “100” instead of “1,” click the “Page Number” button again and choose “Format Page Numbers.” Click the “Start this section with” radio button and type the new number into the field. Click the “OK” button to have Publisher update the ticket number.
An InDesign document can only have one chapter, and these chapters are typically combined in an InDesign book. To insert a chapter number, create a text frame where you want the chapter number to appear on either a document or master page. Click on the "Type" menu, then "Text Variables," "Insert Text Variable" and then "Chapter Number." Update the chapter number if necessary to keep your chapter numbers consecutive by clicking on "Numbering & Section Options" in the Layout menu.
You could stop there and just copy those little bits of text all through your document. But no, we want to make this really, really easy! So we’re going to set up some AutoText entries. What that’s going to do for you (if you’re using Microsoft Word 2010 or above — if you use version 2007, see below for some caveats) is allow you to type the first four letters of your SEQ name and have Word offer to complete the phrase for you, complete with the incrementing number courtesy of the sequence field code we set up earlier.
This one is EASY. In InDesign, with a one-sided NCR form, cut the all elements from the first page. Go to your Master page and place. Where you are going to number the forms, draw a text box and insert a page number marker there. Format it to your liking, then insert as many pages as SETS are going to be made. When you go to print, enter 2 or 3 in the copies box, depending if it's 2-part or 3-part and under the properties button, select GROUPED or UNCOLLATED, turn off OFFSET. Violá!
Microsoft Publisher, the desktop publishing component of the Professional version of the Office Suite, can perform many time-saving tasks for busy business owners, including layout and design work. It can even help you avoid a shopping run to try to find tickets for your next employee picnic, holiday giveaway or executive board meeting. Create your own tickets, including the vital sequential ordering needed for raffles or attendance tracking, using Publisher’s page numbering. With a few tricky manipulations of the page number process, you can start running the numbers in an entirely new fashion.
For example, in our law practice, we submit briefs with hundreds of attachments. Those attachments are constantly being reorganized (thus renumbered) and we had to develop a scheme to keep each attachment (and reference to each attachment) organized and accurate. We created a master list of attachments, and captured the dynamic field code in a bookmark. We can then cross-reference to that bookmark (which will return a number) through our documents. Example Public Attachment 68 (where 68 represents a field sequence code, is captured in a bookmark we will call SR_112). The bookmark name is a code name supplied by the drafting lawyer. That way, when the lawyer refers throughout the document to Public Attachment ___, we insert a cross reference to bookmark SR_112, and it always returns an accurate number, even if we reorganize the order of our attachments.

If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:


And of course, it’s not only when you add or delete counters that the numbering auto-updates, but also when you copy or move the text, as when you’re rearranging your listed points. This InDesign inline counter now works exactly like the counters in my old, beloved XyWrite word processors — except I cannot have several counters with separate numbering in the same text story. In XyWrite I could have nine, using only the codes c1, c2,…c9. But for 95% of one’s counter needs, one counter per story is quite ample — as compared to none.
I used multi-level lists for this sort of thing. When defining my list, I type “Interrogatory No.” before the number field in the number format definition, link it to a list style, 2nd level I type “Request for Production No”, link it to another list style. I’ll use “Answer” with no number as another level of the list. Then I modify the linked styles so the paragraphs are formatted how I need. In the styles linked to request for production and interrogatories, I will use the style linked to “Answer” as the style for the following paragraph. In the “answer” style, I’ll use Interrogatory as the style for following paragraph.
Determine what kind of numbering you want to use for your document or book. For long documents, you can assign chapter numbers. Each document can be assigned only one chapter number. If you want to use different numbering within a document, you can define ranges of pages as sections; these sections can be numbered differently. For example, the first ten pages of a document (the front matter) might use Roman numerals, and the rest of the document might use Arabic numerals.
You can define a section prefix to label section pages automatically. For example, if you specify A– for Section Prefix on page 16 of a document and include the section prefix, the page will appear in the table of contents or index as A–16. Text you type for a section marker appears when you choose Type > Insert Special Character > Markers > Section Marker.
Here, you’ll be given the chance to name your AutoText entry. Name it carefully — for AutoText to work correctly, the first four letters of each of your AutoText entry names will need to be distinct, since these first four letters will be the prompt for Word to offer to complete the phrase for you. My suggestion is to use Interrogatories, Production and Admission as your names, but use whatever is convenient and memorable for you.
- [Instructor] In this week's Word tip I'd like to address a question I'm often asked by people working in tables here in Microsoft Word and that is is there a way to quickly have numbers automatically fill up cells in the table much like they might in Microsoft Excel when you have incremental numbers that need to appear by simple clicking and dragging the corner of a cell. Well, yes, it can be done here in the table in Microsoft Word. It's not done the same way but it is just as easy and we're going to do it with this file, LeafAndMortar Inventory 040. If you have the exercise files, open it up. Now, if you don't have the exercise files, just use one of your own tables. All you need is an empty column. You can see here on page one we do have a table for garden tools and inventory and we need to number these and instead going into each cell and typing in a new number that increments by one, we're going to use a trick to have it automatically fill up that way. On page two of this document you can see there's a second table for hardscaping tools, so we want to differentiate these numbers, so we might want, for example, hardscaping tools, their item numbers to start with the letters HT whereas the garden tools up above might need to start with GT and then the number. Keep that in mind as we now go to the column where we want the numbers to appear. All you need to do is select the entire column. In this case we have a header column with a label in there, item number, so we're not going to use the trick of going to the top and clicking when that arrow appears, instead we're going to select the cells where the numbers need to go. With them selected, now we'll go to the ribbon. With the Home tab selected, go to the Paragraph group and just go to the Numbering dropdown arrow. Don't click the numbering button, that's going to add the default number but click the dropdown. You'll see the different numbering options that are already in the numbering library. You can hover over those to see what it's going to look like. You can see the numbers incrementing by one with a period or with brackets. We could use Roman numerals, even lettering here but if we want our own numbers, we go down a little bit further and click Define New Number. Give that a click. You should see the number style one, two, three selected. Click that dropdown and if you wanted to use something other than one, two, three, like Roman numerals or letters, they're there as well but we do want to start with just plain old numbers one, two, three. And you can see what shows up down below. The number format is the number and then a period and we see a sample of what that's going to look like down below. Well, the first thing we can do is click in that field just to the right of the period and hit your backspace key to take it out, we don't need the period. Now, we can move over to the left side of the number by using the left cursor key or you can click if you want just in front of the one and here's where we can add things like letters. GT, for example, then a dash and if that's all we need, we'll see GT-1, two, three etc. all the way down the column. Maybe you'd like to add zeros in there, like 01, 02 etc. You can do that as well. Once you have exactly what you want, simply click OK and it's done and by the way, that number format is there going forward, so the next time you want to use it, it's going to show up in your numbering library in the document as a number format and if it's one you've recently used, it shows up on this list as well, so you can choose it any time you like. Just click in the background and close that up, click outside the table to deselect everything to see how easy that was to get incremental numbers that start with letters and a dash. Now, scroll down to the table on the second page. Now that you know how to do this, you're going to create your own number style that starts with HT, a dash, perhaps a zero and then incremental numbers by following those same steps on this table. That's your homework knowing what you know after this week's Word tip.
Hi, In the disaster recovery plan we want to create a leg site and put a DC in it. Here are some questions on how to achieve this smoothly. 1. Should I create the new site/subnet first and then promote a server in that subnet/site to DC, or should I promote a server in existing site/subnet and then move this DC to the new site/subnet? 2. When promoting a server to DC, should the server be a member server (already joined the domain) or just a workgroup member (no domain membership)? 3. The DC will be an AD-integrated DNS server. Should I install the DNS component (but not confi...

With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.
Moreover, the subscripts and superscripts could have been left off in the third, fourth, and fifth notations, if the indexing set was understood to be the natural numbers. Note that in the second and third bullets, there is a well-defined sequence {\displaystyle (a_{k})_{k=1}^{\infty }} , but it is not the same as the sequence denoted by the expression.
I create a CStatic object and write some text to the object but the text is too long to display in the work area but I don't konw how to add a vscroll to a CStatic object who can help me? I would say instead of a CStatic, use a CEdit control with the ReadOnly flag set. Because static controls by default aren't scrollable, so even if you add a scrollbar to it, you will have to manage the entire thing yourself (drawing, scrolling....), more trouble than it's worth. Ali R. "Smallfrogs" wrote in message news:eLAO92y7DHA.2832@tk2msft...
What is the name of the template wizard with Data Tracking (Excel. I can not locate the add in template wizard with Data Tracking in Office 2003 Hi Richard You are not the only one The Add-in is working in 2003 only the install file is not working. Copy the xla file from a PC with 2002 to the PC with 2003 and it will work(use Tools>add-ins to browse to the file in Excel) -- Regards Ron de Bruin http://www.rondebruin.nl "Richard" wrote in message news:193C5DFD-578D-48F7-B9D6-9FEF5BDCEB64@microsoft.com... > What is t...
I have a document where in I have to make two kinds of page numbering, A catalog (individually made) which should always start at page 1, and the other is a compiled version where the pages should be a continuous page. They both have the same content but with different output so I tried using layers, but fail to set the page numbering to auto. because setting them would affect both layers.
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
This requires no pre-knowledge of a primary key and only assumes that when you load the form initially, it is already sorted. Any records newly inserted will get the next bigger number. However, if you requery and it causes the newly inserted rows to be re-sorted, they will be now given a new number that relates to their actual position within the set, which can be either good or bad, depending on your specific requirements.
Yes, I’m a little confused by your brief too. The script that I describe here will create an array of numbers using any step value that it offers, including by 1 number each time. Whether you put the resulting list directly into InDesign as text, or indirectly using the Data Merge feature is up to you. Perhaps learn more about the Data Merge feature of InDesign itself – David Blatner has a great series on Lynda.com that will explain Data Merge much more than I can on this thread.
Is there a way to do this: I have a form called "List of Proposals Written" that is listed by th Proposal number. Is there a way to display on another excel spreadsheet, the mos current Proposal number? I know Access you use something like Dmax(ProposalID)+1 What should I do in Excel:confused: Any help would be greatly appreciated! Michae -- Message posted from http://www.ExcelForum.com "daniels012 >" < wrote > I have a form called "List of Proposals Written" that is listed by the > Propos...

Instead of working harder than you need to, insert a one-column table with as many rows as necessary to accommodate your list. Then, using Word's numbering feature, number that column. Finally, convert the table to text. The resulting list is a fixed numbered list, so you'll have to live with its limitations; when you can do so, this method definitely beats most alternative solutions.
×