Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically.
 	Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.

Thank you for your prompt response, Deborah. However, I don’t believe I explained myself in the detail required. To reiterate: My autonumbering example is FORM INTERROGATORY NO. 1.1. The next interrogatory would be numbered 1.2, then 1.3, etc.–automatically and sequentially numbered. Next would be FORM INTERROGATORY NO. 2.1 (see example 1.1 above). Please understand that the interrogatory must be auto-numbered–both the 1 and the 1, both the 1 and the 2, etc.; both the 2 and the 1, both the 2 and the 2; both the 3 and the 1; both the 3 and the 2. That is my dilemma.

Every time I open Outlook 2007 I get an error message regarding an add-in 'DCCExtensions' (DCCEXT32.DLL). It says the add-in cannot be loaded and has been disabled by Outlook. I've been getting this message ever since I uninstalled Winfax. How do I make this error stop appearing? Thanks. -- kapibarra Remove the addin from OL by using Trust Center, Addins. http://office.microsoft.com/en-us/outlook/HA100341271033.aspx#14 "kapibarra" wrote: > Every time I open Outlook 2007 I get an error > message regarding an add-in 'DCCExtensions' (DCCEXT32.DLL). ...


It may be convenient to have the sequence start with an index different from 1 or 0. For example, the sequence defined by xn = 1/log(n) would be defined only for n ≥ 2. When talking about such infinite sequences, it is usually sufficient (and does not change much for most considerations) to assume that the members of the sequence are defined at least for all indices large enough, that is, greater than some given N.
Erica Gamet has been involved in the graphics industry for an unbelievable 30 years! She is a speaker, writer, and trainer, focusing on Adobe InDesign and Illustrator, Apple Keynote and iBooks Author, and other print- and production-related topics. She is a regular presence at CreativePro Week’s PePcon and InDesign Conferences, and has spoken at ebookcraft in Canada and Making Design in Norway. You can find Erica’s online tutorials at CreativeLive and through her YouTube channel. When she isn’t at her computer, she can be found exploring her new homebase of Seattle and the greater Pacific Northwest.
Ok I guess it is better for me to explain what I am doing. I am in the process of creating an Access Database that an individual has been using an Excel spreadsheet forever and a day. Well the individual has on occasion doubled up numbers, forgot numbers, etc. So on what I have learned from different Access courses and Google searches I am trying to apply my knowledge.
Hi, this is a great write up. I am very new to InDesign and i print onto a range of products and my first order with sequential numbering came up (serial numbers), I have the template made in illustrator and i also have the numbers added (00001 on all of the art work). A friend told me InDesign has a function for automatically incrasing the numbers by 1 for each art work. I have 105 pieces per template, is there a way to import the design and then sort the number (already text edible) and then save as a pdf then send to print?
Is there a way to code the special interrogatory numbers wherein the identify of documents is requested such that those specific special interrogatories (and only those specific special interrogatories) are automatically generated in a separate demand for production of documents? In other words if Special Interrogatory numbers 3, 6, 9, 12 request identification of documents, is there a way to code those special interrogatories so that within the demand for production of documents, those specific but individual special interrogatory numbers can be referenced?

I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...

you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
In this scenario we are assuming that there will be no more than 999 documents attached to a case. In Scenario 2 we assumed no more than 9999 inquires during a year. So you need to adjust the number of zeros when formatting Sequence for the anticipated number of records. Of course this can always be changed later. You also don’t need to format the sequence with leading zeros as the Format function does. As shown the expression returns something like: DCASD/CI123-025 for the 25th document in case CI123 for client DCASD. Without leading zeros it would be: DCASD/CI123-25. The advantage to the latter is that you don’t have to anticipate the number of records you might have in the sequence, but I’ve found many users prefer a more uniform number with the leading zeros.
you'd need to use a before save macro. Something like the macro at the end - but it would run on every save, which may not be what you want. I use a macro that gets the invoice # and saves (it does several things). I added a button to the ribbon that calls a macro that runs several macros: Sub FinalizeInvoice() CreateInvoiceNumber CopyToExcel FinalCleanup ' this does the save End Sub This is an automated macro - but it will run every time the file is saved. Private WithEvents App As Word.Application Private Sub Document_Open() Set App = Word.Application… Read more »
I am attempting to write a query joining two linked tables in a query by payroll number (all numeric). When write the query and join by payroll number I get the "Data Type Mismatch in Expression" error. Both tables have the Data Type as "Number", but the only difference I can tell is one has "Field Size" as "Decimal" and the other has "Field Size" as "Double". I have even tried to join on the VAL() of each payroll number field with no luck. Any ideas? "Decimal" and "Double" are actually different dat...

There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.
There is very simple solution that we use and that is to lay out the sheet say 6 up on a A4 sheet as a master page and in document setup set the number of pages to 1,000 if that is the amount you require. Put a page number on each ticket on the page and although they will all have the same number on each page, we put the the first two letters of the customers business name before each number followed by the letters of the alphabet so it then reads for example BT1A, BT2A, BT3A, BT1B, BT2B, BT2C and so on as each page is printed.
I'm using Column A of a spreadsheet to number some items in Column B. I've been using Excel's automatic series-filling function, where you drag down from the lower right corner of a cell. However, since some of the rows in Column B are empty, and I don't want them numbered, I have to stop numbering and manually "jump" over the blanks in Column A. Is there a way to automatically number down in Column A, while skipping over the blanks and continuing where I left off? I.e. 1 2 3 4 5 ? Thanks much. Try this in A1: =IF(B1<>"",COUNTA($B$1:B1),"...
I need to add 4 "technical contact" fields (which would lookup the Contact entity) to the CONTRACT form. Is this possible? I've found it difficult to figure out what to do first. Thanks in advance, Brandon Not possible. You cant have multiple lookups for the same entity. You also cannot create new relationships between two system entitites. This will work in 4.0 Not possible, Pezman. N:M relationships are not possible in 3.0 yet. There is a alternative solution: a new entity to act as an N:M relationship. In your case, Contract/Contact. This entity has two 1:N relations...

This tip was very helpful. Now I have been able to automatically number dozens of examples in a linguistics paper, and as I revise the paper and insert new examples between the existing examples, the numbering is automatically adjusted. Now the next step is how to use bookmarks for the references to the examples in the text of the paper. The references need to point to specific examples, and need to be automatically adjusted when the numbering of examples is adjusted. Any ideas on how to do this?


Word templates are wonderful things. Microsoft, and hundreds of other people, have created some great free templates for almost everything. With these free templates you can make meeting agendas The 15 Best Meeting Agenda Templates for Microsoft Word The 15 Best Meeting Agenda Templates for Microsoft Word These meeting agenda templates for Microsoft Word can get you off to a great start for any type of meeting. Read More , beautiful flowcharts How to Create Stunning Flowcharts With Microsoft Word How to Create Stunning Flowcharts With Microsoft Word Used with imagination, flowcharts can simplify both your work or life. Why not try out a few flowcharts with one of the easiest tools on hand – Microsoft Word. Read More , professional resumes How to Create a Resume Template with Microsoft Word How to Create a Resume Template with Microsoft Word Your resume could be the difference between interviewing for the job of your dreams or never hearing back from the employer — use these tips to make sure it's the best it can be. Read More , and custom calendars 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long You can never have enough reminders that your most valuable personal resource is limited. Our selection of printable weekly, monthly, and yearly calendars will help you manage your time wisely. Read More in minutes. A custom calendar might be a good fundraiser, too!

Ok, generating a random 3 digit number is a whole different thing, so I’m not going to go into that. If you want your numbers to start at 100 (to insure three digits) then change the 0 to 99. The Nz function will return the value listed if the field is Null. So the first time you execute that code, the DMax should return a Null since no numbers have been generated for the PONum field. The Nz will then substitute 99 and then increment that by 1. You can accomplish something similar by just entering 100 as the PONum for one record. .

I know that PrintShopMail will do it, but I was wandering if there was a less expensive solution out there so that I could get numbered tickets (usually 4-up) right off the Xerox. I just want to avoid having to go the the Windmill after trimming and doing it the old fashion way. There is a tiny little copy shop here in town that is doing it, and am willing to bet that they are not using PrintShopMail, but I'm also not going to ask them to share their methods with a competitor. There has to be cheaper solution. I know that I can do it with auto page numbering in Indesign, but that means I can only print raffle tickets 1-up which wont work.
I have a cell which has a basic formula in (adding up from 2 other cells) This number can end up being a minus number (-167), If this happens I need to be able to make that minus number appear as a zero (0). Is this possible? please help. =IF(A1+B1<0,0,A1+B1) Alternative =MAX(0,A1+B1) Gord Dibben Excel MVP On Sat, 7 May 2005 08:28:03 -0700, "marcus1066" wrote: >I have a cell which has a basic formula in (adding up from 2 other cells) >This number can end up being a minus number (-167), If this happens I need to >be...
Perhaps the easiest solution to this problem (short of using a macro) is to simply use the mail-merge capabilities of Word. You would use a simple data source that contained the numbers you want assigned to each copy. Then, place the merge field at the appropriate place in y our document, and run the merge. Each copy will contain the desired copy number. The added benefit of using this approach is that you can use additional information with your merge, as needs dictate. For instance, if each copy of the document was assigned to a particular person, you could simply add another data field to your data source that contained the name of the person to receive the copy. Then, you could print that person's name in each merged document, as well.
I want to have textbox with 2 columns with footnotes running across the bottom of those columns in one column. ID CS3 footnotes can’t handle this. So I have added fake footnote refs in the doc. using this idea. Now the footnotes themselves I can create in another text frame and use this idea again to create them and then manually place them at the bottom of the page. The only problem however with this is the FN options carrry across the whole doc. right? So even if I create a second doc for the footnotes themselves with different options and then later paste it into the main doc it’ll get messed up right?
With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:
×