This takes a little figuring out. I spent about 3 hours before I got it right, because I can be a little dense about things sometimes, but if you are going to do set numbers of tickets a few times, the time you spend arranging the numbers is well spent and will be made up on the cutter and in the sorting. It seems to me that you could do the same thing for use with the variable data module on the BizHub. I suspect the issue is that you have consecutive numbers on the same sheet so someone has to sort them all and stack them in order after they're printed and cut.
This program makes you adept for not only creating event tickets but also generating attractive resumes and different menus. What you need to do is to find the appropriate Microsoft template and include the desired texts in the blanks available. The program then allows you to opt for the color of your choice .subsequently you can either save the template as a file or you can click on the print right away.
We use the auto page numbering trick here, the trick is to do it as spreads. You just make your pages the same size as the ticket with crops and bleeds. Then set up the shell on the master page and place your auto page number where you want your numbers. Each pages is the next number. You can also have two sets of numbers for perforated ticket. You then can use the page start options to add to the numbers and keep the same number of total numbers. For example you would do a new page start after number 99. 0001 to 0099 so it doesn't add two "0's" to the front of 100 and you get 00100 when you want 0100. Works great for small quantities, we have done up to 1000+ tickets and once you do it once or twice it is a snap to set up. To avoid having to do 1000 pages just send the tickets in groups. Usually between 25 to 100 at a time works good depending on artwork file size. Just save each time before sending to printer and name the file with what the tickets are. Like "MyTickets-0001-0100.Indd". Makes it easier to go back if you have a problem. You can even do two rolls of tickets if your using 12 x 18 sheets by flipping the sheet and doing one row along the top and one along the bottom on reverse side. That is if your ticket is single Sided. Two sided tickets are a bit trickier. :-)

Our raffle ticket templates have a placeholder for a ticket number, usually “xxx” to remind you it needs to be replaced. Select it, click Insert Merge Field > Ticket. Do the same for the second ticket number placeholder. Most tickets will have two number placeholders because one part of the ticket is for the raffle host (you) and the other is for the purchaser.

Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.
I also use InDesign. An Excel file for numbering is easy to create. Then find DataMerge under Automate to link the data file. When you are ready to export, use the create PDF right on the Datamerge window. You can print as cut / stack on the Fiery (or CREO). REMEMBER - if your customer wants them stapled into books of 6 (for example) each stack has to be divisible by 6 if you are going to staple then cut into individual books.
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
The EASY way to set up the text file is to use Excel to make a grid the number of sheets wide by the number of tickets per sheet deep. Put the first number in the upper left cell, then fill consecutively to the right until the number of columns is equal to the number of sheets you will print, then move down a row and do the same thing with the next numbers, and so on until you've finished the grid.

I usually do my numbering in excel and save it as a tab delimited text file. I would put the starting number in A1 and insert a formula in A2 that is basically A1+1. Then I grab the lower right corner of that cell and while holding cmd (on Mac), I drag the cell down to A10 (or whatever number of pages you will be printing). This would auto populate the cells and change the formula to basically add 1 to the previous cell. Now go in B1 and insert a formula that adds 10 to A1 (or whatever number of pages you will be printing). In this example, the value should be 11. Then drag this cell to repeat the formula right to have the number of up you will have. The select A2 trough A10 and drag them the same way to populate the remaining cells. Save your excel file for future reference and save as tab delimited text. Open the file in textedit, find every tab and replace all with a paragraph change. Then import the file in investing in linked text boxes over your imposition.
Now click on the Microsoft Office Word Help option. Consequently, to the right side of the word document, a support box will pop up. You can easily look for the option Search for and after you find this box, you need to type Create numbered tickets and hit on the green arrow. This Help feature will do all the work for you and it will enlist a number of relevant choices in the area of your search. (501 Microsoft Templates)
I am trying to create Raffle Style tickets using Avery 16154 ticket stock.  I am working in Adobe InDesign CC.  Can someone tell me how to create sequentially numbered tickets in Adobe InDesign CC (I have found it for other versions which don't work in CC). I need a ticket number on the "stub" and the same matching number on the tear off portion.  They are 10 tickets to an 8.5 X 11 page.
I answer readers' questions about Microsoft Office when I can, but there's no guarantee. When contacting me, be as specific as possible. For example, "Please troubleshoot my workbook and fix what's wrong" probably won't get a response, but "Can you tell me why this formula isn't returning the expected results?" might. Please mention the app and version that you're using. I'm not reimbursed by TechRepublic for my time or expertise, nor do I ask for a fee from readers. You can contact me at susansalesharkins@gmail.com.
Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
There is very simple solution that we use and that is to lay out the sheet say 6 up on a A4 sheet as a master page and in document setup set the number of pages to 1,000 if that is the amount you require. Put a page number on each ticket on the page and although they will all have the same number on each page, we put the the first two letters of the customers business name before each number followed by the letters of the alphabet so it then reads for example BT1A, BT2A, BT3A, BT1B, BT2B, BT2C and so on as each page is printed.
The exciting thing about our templates is that you are free to customize them, they are easy to download, and you can use them over and over again. These templates will save you time and money and so easy to use, that you can grab yourself a cup of coffee, sit down, relax and create your raffle tickets. Remember you might find other uses for them as well, some may use this sequential numbering system to create price tags for bake sales, and garage sales. Indeed, anything you may require a ‘ticket’ for, you can customize our templates and make them work for you.

I am using your instructions to create a page of tickets - the design has been created as a picture so I added a text box to "hold" the mail merge instructions but I keep getting the error message "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I have not included any of these but I'm wondering if it's because I've attempted to insert it in a text box. Is there an easy way to do this? TIA
×