The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
The values for Number position (here called Aligned at), Text indent and Follow number with are in the Position section at the bottom. With multi-level numbering, you also have easy access to settings that control the type of numbering at each level, the characters before and after each level’s numbers (period versus parenthesis), and the list number style (1, a, I, etc.).
Whenever you begin a new project, clear the settings out. There's a couple ways to do this. You can choose Tools Customize, and hit Reset Usage Data. But more than likely, you've forgotten to do that like I do. So, instead, when you go to use a bulleted or numbered list, go ahead and reset them all. I did not do anything special to show you the screenshot below. I just opened Word 2003, and hit Format Bullets and Numbering, and there it was, already like it is in the picture. Doesn't look like the default, does it? Nope!
When the “Current Page Number” placeholder sits on a master page, every page to which you assigned that specific master page will display this variable – the number will change automatically on every page. If you change the style assigned to the placeholder on the master page (let’s say you set it to bold), all page numbers will update to that style (all numbers will become bold).
If you need the numbers written out in a language other than English, you must supply your own written-out list. Make sure to use a plain text editor (such as Notepad on Windows) and write one number per line. Save the file (for languages that use extended character sets, make sure to set the encoding to UTF-8) and place it in the same folder as the InDesign file you want to number.
The first conscription numbering was ordered by Maria Theresa in 1770 and implemented in 1770–1771. The series was given successively as the soldiers went through the settlement describing houses with numbers. Thereafter, every new house was allocated the next number sequentially, irrespective of its location. Most villages still use their original number series from 1770–1771. In cities, houses have been renumbered once or more often in order to be sequential – the first wave of renumbering came in 1805–1815. In 1857, the Austrian Emperor allowed a new system of numbering by streets. This new system was introduced in the biggest cities (Prague, Brno) in the 1860s. In 1884, land registration books were introduced and they used the old (conscription) numbers as a permanent and stable identifier of buildings. The new (orientation) numbers continue to be used concurrently.
A defined list can be interrupted by other paragraphs and lists, and can span different stories and different documents in a book. For example, use defined lists to create a multi-level outline, or to create a running list of numbered table names throughout your document. You can also define lists for separately numbered or bulleted items that are mixed together. For example, in a list of questions and answers, define one list for numbering the questions and another for numbering the answers.
With the numbered paragraphs shown above, there is no extra spacing between the paragraphs. That’s easy to fix. Go ahead and type out at least part of your first numbered paragraph, then go to the Page Layout tab and adjust the value of Spacing After in the Paragraph section. Still no extra space? There’s one more setting to check. Click the launcher arrow in the lower right-hand corner to go to the Paragraph dialog box, uncheck the box next to “Don’t add space between paragraphs of the same style.” Click OK. That paragraph and all the remaining numbered ones will have more breathing room.
You will occasionally want to place an unnumbered paragraph in the middle of a sequence, but the moment you hit Enter, another paragraph number pops up. To fix this, toggle paragraph numbering off by pressing the paragraph numbering button you used for the previous paragraph. (If you use the button’s drop-down, choose None as the numbering scheme.) Unfortunately, the paragraph settings won’t revert to Normal here; it’ll usually have the paragraph indented 0.25. Use the keyboard shortcut CTRL+Q to strip paragraph settings out, then revise the formatting as you wish.
multilevel headings in legal format are just soo badly broken. If it requires 6 steps to do a basic everyday document management process, why is there not a choice for a more reliable solution. I have been fighting this for about half an hour – I may was well use notepad to do my documentation at this point, but I will persevere… or I will start a brand new document. How broken a solution is that. …car won't start, get a new car! Thanks for the pointers, almost there.
There are lots of options. For instance, you might reduce the amount of space between the number and the text by changing the Text indent at setting. Or, you might center the heading by choosing Center from the Number alignment dropdown. For even more options, click More to expose several more settings. You could use the Apply changes to option when setting level 1 to the I, II, III numbering style instead of changing it for each level.
The 2005 edition of the International ISBN Agency's official manual describes how the 13-digit ISBN check digit is calculated. The ISBN-13 check digit, which is the last digit of the ISBN, must range from 0 to 9 and must be such that the sum of all the thirteen digits, each multiplied by its (integer) weight, alternating between 1 and 3, is a multiple of 10.
Place the insertion point in the paragraph and choose Restart Numbering from the context menu or choose Type > Bulleted And Numbered Lists > Restart Numbering. In normal lists, this command assigns the number 1 (or letter A) to a paragraph and makes it the first paragraph in a list. In multi-level lists, this command assigns the first lower-level number to a nested paragraph.
The critical thing to know here is that this option applies to the section of the document where your insertion point is currently placed. If you only have one section in your document, selecting the “Different First Page” option makes the current header and footer disappear from the first page of your document. You can then type in different information for your header or footer on the first page if you want.
A nested list is a numbered or bulleted list with subordinate (usually indented) numbered or bulleted lists. Rather than just a list of numbered items (1,2,3...), a nested list may have item 1, then indented items numbered a,b,c or i,ii,iii or some other numbering method before the main number 2. With numbering styles you can achieve any combination of numbering formats you want.
ISBN issuance is country-specific, in that ISBNs are issued by the ISBN registration agency that is responsible for that country or territory regardless of the publication language. The ranges of ISBNs assigned to any particular country are based on the publishing profile of the country concerned, and so the ranges will vary depending on the number of books and the number, type, and size of publishers that are active. Some ISBN registration agencies are based in national libraries or within ministries of culture and thus may receive direct funding from government to support their services. In other cases, the ISBN registration service is provided by organisations such as bibliographic data providers that are not government funded.
InDesign’s automatic page numbers work well enough, but what about special cases? Some documents require pages to be omitted from total page counts. Other documents use several different systems. Sometimes section numbers or special codes must be included. Well, don’t start typing in those numbers manually, because InDesign can handle it—and quite gracefully, too.
^ Some books have several codes in the first block: e.g. A. M. Yaglom's Correlation Theory..., published by Springer Verlag, has two ISBNs, 0-387-96331-6 and 3-540-96331-6. Though Springer's 387 and 540 codes are different for English (0) and German (3); the same item number 96331 produces the same check digit: 6. Springer uses 431 as their publisher code for Japanese (4) and 4-431-96331-? would also have check digit ? = 6. Other Springer books in English have publisher code 817, and 0-817-96331-? would also get check digit ? = 6. This suggests special considerations were made for assigning Springer's publisher codes, as random assignments of different publisher codes would not lead the same item number to get the same check digit every time. Finding publisher codes for English and German, say, with this effect amounts to solving a linear equation in modular arithmetic.
The phrase "commercial exploitation" means the use of data originating from the NPAC/SMS for the sole, exclusive or principal purpose of, or having a material purpose of, marketing telecommunications services to end users and consumers of telecommunications services or identifying those end users and consumers of telecommunications services and obtaining or retaining them as customers.