There are lots of options. For instance, you might reduce the amount of space between the number and the text by changing the Text indent at setting. Or, you might center the heading by choosing Center from the Number alignment dropdown. For even more options, click More to expose several more settings. You could use the Apply changes to option when setting level 1 to the I, II, III numbering style instead of changing it for each level.

Under the horseshoe numbering scheme, starting from one end, the buildings on the right side of the street were numbered sequentially from the near end to the far end of the street. The next number was then assigned to the last building on the left, opposite side of the street, the following numbers sequentially doubling back along the left side of the street. The building with the highest number would be the first on the left side, facing building number 1 across the street. The horseshoe numbering system remains in use in older streets in many German cities, notably Berlin, although newer adjoining streets may use modern European numbering. Kurfürstendamm in Berlin is a well-known example of a street where the horseshoe numbering scheme is still in use, although the numbering today starts with 11 at Breitscheidplatz, with number 237 across the street being the highest number.[16]


For some documents, though, you’ll want to get a little fancier. For example, what if you don’t want the page number to appear on the first page of the document (or on the first page of each section)? Or what if you want the page number placement to be different on odd and even pages, the way it is in a book? Or what if you have different sections that you want to be numbered differently—like an introduction or table of contents where you want Roman numerals instead of the Arabic numerals used in the rest of your document?
Check the Restart Numbering After option, if you want sublevel numbers to start at 1. In most cases, you'll want to set the After option to the previous heading, as shown in Figure F. Doing so forces Word to start renumbering Heading 2 paragraphs after each new Heading 1 paragraph. In other words, when Heading 1 updates to 2, the sublevel number will start over at 1, generating 2.1, 2.2, 2.3, and so on.
The heading here could be anything: affirmative defenses in an answer, articles in a contract, etc. It doesn’t matter; the technique is the same with only slight variations. The result is that you’ll have a heading saved in your Quick Parts that will be numbered correctly, no matter how many items you add or delete. This makes this technique particularly useful in building templates for common documents; because it’s always easier to delete than add, they’ll re-number themselves after editing.
In Latin America, some countries, like Mexico and Uruguay, use systems similar to those in Europe. Houses are numbered in ascending order from downtown to the border of the city. In Mexico, the cities are usually divided in Colonias, which are small or medium areas. The colonia is commonly included in the address before the postal code. Sometimes when houses merge in a street or new constructions are built after the numbering was made, the address can become ambiguous. When a number is re-used, a letter is added for the newer address. For example, if there are two 35s, one remains as "35", and the second one becomes "35A" or "35Bis".
When you click Perform numbering > Number modified objects on the Drawings & reports tab to run numbering, Tekla Structures displays a list that shows the numbering progress. When the numbering is finished, the changed numbering results are highlighted in the list. When you select an item on the list, Tekla Structures highlights the corresponding object(s) in the model. If you keep the F key pressed when you select the item, Tekla Structures fits the work areacertain portion of the model that is currently active for working on in a view
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
It is sometimes common in remote towns or non-planned areas inside the cities, that the streets do not have any name and the houses do not have numbers. In these cases, the address of the houses are usually the name of a person or family, the name of the area or town, or Dirección Conocida ("known address"), which means that the house of the family is known by almost all the community. This kind of addressing is only used in remote towns or small communities near highways. For people living near highways or roads, the usual address is the kilometer distance of the road in which the house is established; if there is more than one address, some references might be written or the Dirección Conocida may be added.

The national ISBN agency assigns the registrant element (cf. Category:ISBN agencies) and an accompanying series of ISBNs within that registrant element to the publisher; the publisher then allocates one of the ISBNs to each of its books. In most countries, a book publisher is not required by law to assign an ISBN; however, most bookstores only handle ISBN bearing publications.[citation needed]
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
The first conscription numbering was ordered by Maria Theresa in 1770 and implemented in 1770–1771. The series was given successively as the soldiers went through the settlement describing houses with numbers. Thereafter, every new house was allocated the next number sequentially, irrespective of its location. Most villages still use their original number series from 1770–1771. In cities, houses have been renumbered once or more often in order to be sequential – the first wave of renumbering came in 1805–1815. In 1857, the Austrian Emperor allowed a new system of numbering by streets. This new system was introduced in the biggest cities (Prague, Brno) in the 1860s. In 1884, land registration books were introduced and they used the old (conscription) numbers as a permanent and stable identifier of buildings. The new (orientation) numbers continue to be used concurrently.

I've been using Word in various incarnations for over 20 years (although I always preferred WordPerfect) and the automatic paragraph numbering was always a weak spot. The extraordinary thing is that it has got worse since 2003 – the bloat really has taken over, and for choice I use Word 2000, although sadly I can't do that at work. As a result, I have spent the best part of 2 days wrestling with a document that refused to number correctly, until I found your blog. I was on the point of doing them all manually, just to save time. Thank you!
Hopefully what this InDesign tutorial will show you is that page numbering in InDesign is just as easy to do as it is any other program, and much easier than in most. InDesign allows for quick, easy, and automatic page numbering, and I’ll be showing you how to do that today. It’s a simple trick to learn, takes only a few short seconds, and will be a skill that you will be thankful for every time you need to use it. You can always refer back to this InDesign tutorial should you forget any of the steps.
An ISBN is assigned to each edition and variation (except reprintings) of a book. For example, an e-book, a paperback and a hardcover edition of the same book would each have a different ISBN. The ISBN is 13 digits long if assigned on or after 1 January 2007, and 10 digits long if assigned before 2007. The method of assigning an ISBN is nation-based and varies from country to country, often depending on how large the publishing industry is within a country.
In Clio, Matters are organized and referred to by their Matter Number. The Matter Number can also contain non-number options such as the client's name, the Matter description, and the year, in addition to a number. For example, the default Clio Matter numbering and naming scheme includes a firm-wide Matter number as well as the client's name. In this article, we will give a general overview of Matter numbering options, as well as cover how to update your Matter numbering settings.
In the Bullet or Number Position section, set the Alignment to Right. The Left Indent is where the text will start. The First Line Indent is the amount of space that should be subtracted from the left indent to determine where the period after the number will be positioned. This was determined in the first step with the spacing placeholder text. Leave Tab Position blank and check Preview to see the options take effect in the highlighted text. Make any needed adjustments to the positions, and when you are satisfied, click OK.
Whenever you begin a new project, clear the settings out. There's a couple ways to do this. You can choose Tools Customize, and hit Reset Usage Data. But more than likely, you've forgotten to do that like I do. So, instead, when you go to use a bulleted or numbered list, go ahead and reset them all. I did not do anything special to show you the screenshot below. I just opened Word 2003, and hit Format Bullets and Numbering, and there it was, already like it is in the picture. Doesn't look like the default, does it? Nope!
In Uruguay, most house numbering starts at a high number among the hundreds or the thousands. The system is similar to the French-Spanish one: when a house is divided the term 'bis' is added with the difference that no single term designates the third: when a house is divided or added between another the term 'bis' is repeated as many divisions have been made or houses added in between, for example '3217 bis bis' corresponds to the third house from the 3217th, and so on, when many houses are merged the lowest number is used, leaving the in-between numbers missing.[19] Also there are cases when no number is assigned, this occurs mostly in peripheral areas inside the cities, low house numbering occurs in small locations and in balneary areas houses are designated by name rather than number.
Formerly, Roman numerals signifying the city district were added to the conscription number: e.g. "125/III" means conscription number 125 in district number III (in Prague, this was Malá Strana). Roman numerals were used both in cities and in village municipalities with more settlements. Nowadays, the name of the settlement is preferred instead of Roman numerals.

Do not let me lead you into a headache under false pretences: this FAQ is not going to tell you how to fix a document that contains broken numbering. It simply explains how the numbering works: this is valuable information if you work with Word a lot, and by understanding it, you can often work out how to fix a document. However, this FAQ is not going to tell you how.  (For a discussion of methods, see: List Restart Methods).
timdunn you just saved my life and my job. Why is this so hard and totally disconnected from how to set up Heading styles through the Styles options? I don't remember it being this hard in previous versions of Word. I wasted hours and hours today banging my head against a brick wall. Thanks so much for you helpful guidance and instructions. Lifesaver.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
Another scheme is based on residential areas called cư xá. A cư xá is addressed by house number, road, and cư xá, for example "123 đường số 4 cư xá Bình Thới". Some localities still use an older address format based on neighborhood (khu): for example, in "7A/34 Tô Hiến Thành", 7A is the neighborhood number. This confusing format is being gradually phased out in favor of the more modern formats above.
Another scheme is based on residential areas called cư xá. A cư xá is addressed by house number, road, and cư xá, for example "123 đường số 4 cư xá Bình Thới". Some localities still use an older address format based on neighborhood (khu): for example, in "7A/34 Tô Hiến Thành", 7A is the neighborhood number. This confusing format is being gradually phased out in favor of the more modern formats above.

The creator of ShaunaKelly.com, Shauna Kelly, passed away peacefully on Wednesday November 16, 2011 after a long battle with ovarian cancer. If you are requesting permission to re-use any information on this site, then you may do so with appropriate acknowledgement of her work. If her words, thoughts or pictures have helped you, or made money for you, then please consider making a donation in her name to the Women's Cancer Foundation.

a concept of quantity that is or can be derived from a single unit, the sum of a collection of units, or zero. Every number occupies a unique position in a sequence, enabling it to be used in counting. It can be assigned to one or more sets that can be arranged in a hierarchical classification: every number is a complex number; a complex number is either an imaginary number or a real number, and the latter can be a rational number or an irrational number; a rational number is either an integer or a fraction, while an irrational number can be a transcendental number or an algebraic numberSee complex number, imaginary number, real number, rational number, irrational number, integer, fraction, transcendental number, algebraic number See also cardinal number, ordinal number
×