The heading here could be anything: affirmative defenses in an answer, articles in a contract, etc. It doesn’t matter; the technique is the same with only slight variations. The result is that you’ll have a heading saved in your Quick Parts that will be numbered correctly, no matter how many items you add or delete. This makes this technique particularly useful in building templates for common documents; because it’s always easier to delete than add, they’ll re-number themselves after editing.
You have two choices when faced with the task of numbering headings in a Word document. You can enter the numbers manually and hope nothing changes — lots of luck with that one. Or you can opt for the more efficient solution and create and apply a numbered style. Unfortunately, that can get you into even more trouble, if you don't know what you're doing. To avoid surprises, follow these 10 steps to add a numbering scheme to a style.
When you click Perform numbering > Number modified objects on the Drawings & reports tab to run numbering, Tekla Structures displays a list that shows the numbering progress. When the numbering is finished, the changed numbering results are highlighted in the list. When you select an item on the list, Tekla Structures highlights the corresponding object(s) in the model. If you keep the F key pressed when you select the item, Tekla Structures fits the work areacertain portion of the model that is currently active for working on in a view
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.
Either number may be used in addresses. Sometimes, businesses will use both numbers to avoid confusion, usually putting the descriptive (or registration) number first: "Hlavní 20/7". The two (or three) types of numbers are commonly distinguished by colour of the sign. Each municipality can have its own traditional or official rules and colours. In Prague and many other Bohemian cities, descriptive numbers are red, orientation numbers are blue and "evidential" numbers are green or yellow or red. In many Bohemian municipalities, descriptive numbers are blue, black, or are not unified. In Brno and some Moravian and Slovak cities, descriptive numbers are white-black signs, orientation numbers are red-white signs. Many cities and municipalities have different rules.
Let's say you just created a paragraph in Heading 1 style. Now, you press Enter to go on to create the next paragraph. What style will that paragraph be in? You can modify a style to stipulate the style Word uses for the following paragraph. So you could set it up so that, when you're entering text, a Heading 1 will be followed by a Heading 2. And, you could set it up so that a paragraph in Heading 2 will be followed by a paragraph in style Body Text.

^ Some books have several codes in the first block: e.g. A. M. Yaglom's Correlation Theory..., published by Springer Verlag, has two ISBNs, 0-387-96331-6 and 3-540-96331-6. Though Springer's 387 and 540 codes are different for English (0) and German (3); the same item number 96331 produces the same check digit: 6. Springer uses 431 as their publisher code for Japanese (4) and 4-431-96331-? would also have check digit ? = 6. Other Springer books in English have publisher code 817, and 0-817-96331-? would also get check digit ? = 6. This suggests special considerations were made for assigning Springer's publisher codes, as random assignments of different publisher codes would not lead the same item number to get the same check digit every time. Finding publisher codes for English and German, say, with this effect amounts to solving a linear equation in modular arithmetic.


In the early/mid 19th century numbering of long urban streets commonly changed (from clockwise, strict consecutive to odds (consecutive) which face evens (consecutive)). Where this took place it presents a street-long pitfall to researchers using historic street directories and other records. A very rare variation may be seen where a high street (main street) continues from a less commercial part — a road which breaks the UK conventions by not starting at 1 or 2. On one side of the main road between Stratford and Leytonstone houses up to no. 122 are "Leytonstone Road". The next house is "124 High Road, Leytonstone".
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.
Within the 979 prefix element, the registration group identifier 0 is reserved for compatibility with International Standard Music Numbers (ISMNs), but such material is not actually assigned an ISBN.[12] The registration group identifiers within prefix element 979 that have been assigned are 10 for France, 11 for the Republic of Korea, and 12 for Italy.[37]
Partly because of an expected shortage in certain ISBN categories, the International Organization for Standardization (ISO) decided to migrate to a thirteen-digit ISBN (ISBN-13). The process began 1 January 2005 and was planned to conclude 1 January 2007.[48] As of 2011, all the 13-digit ISBNs began with 978. As the 978 ISBN supply is exhausted, the 979 prefix was introduced. Part of the 979 prefix is reserved for use with the Musicland code for musical scores with an ISMN. The 10-digit ISMN codes differed visually as they began with an "M" letter; the bar code represents the "M" as a zero (0), and for checksum purposes it counted as a 3. All ISMNs are now 13 digits commencing 979-0; 979-1 to 979-9 will be used by ISBN.
If you are a new publisher, you should apply for your own ISBN publisher prefix and plan to identify and circulate your books properly in the industry supply chain. You may encounter offers from other sources to purchase single ISBNs at special offer prices; you should be wary of purchasing from these sources for the reasons noted above. There are unauthorized re-sellers of ISBNs and this activity is a violation of the ISBN standard and of industry practice. A publisher with one of these re-assigned ISBNs will not be correctly identified as the publisher of record in Books In Print or any of the industry databases such as Barnes and Noble or Amazon or those of wholesalers such as Ingram. If you have questions, contact the US ISBN Agency for further advice.
Most mainland Chinese cities use the European system, with odd numbers on one side of the road and even numbers on the opposite side. In high-density old Shanghai, a street number may be either a hao ("号" hào) or nong ("弄" nòng/lòng), both of them being numbered successively. A hao refers a door rather than a building, for example, if a building with the address 25 Wuming Rd is followed by another building, which has three entrances opening to the street, the latter will be numbered as three different hao, from 27 to 29 Wuming Rd.
You have two choices when faced with the task of numbering headings in a Word document. You can enter the numbers manually and hope nothing changes — lots of luck with that one. Or you can opt for the more efficient solution and create and apply a numbered style. Unfortunately, that can get you into even more trouble, if you don't know what you're doing. To avoid surprises, follow these 10 steps to add a numbering scheme to a style.
On some long urban roads (e.g. Parramatta Road in Sydney) numbers ascend until the road crosses a council or suburb boundary, then start again at 1 or 2, where a street sign gives the name of the relevant area — these streets have repeating numbers. In semi-rural and rural areas, where houses and farms are widely spaced, a numbering system based on tens of metres or (less commonly) metres has been devised. Thus a farm 2,300 metres (7,500 ft) from the start of the road, on the right-hand side would be numbered 230.[8]
While InDesign veterans may assume everyone already knows this, I can assure you I have worked with very sophisticated documents from designers who did not take advantage of this basic feature. A good rule of thumb to keep in mind as you tackle InDesign challenges is this: If it’s repetitious, tedious, or time-consuming, there’s probably a built-in solution right there in the program. You just need to go look for it.
Next, provide the script with a list of written-out page numbers. When you downloaded the script, included was a plain text file called “PageNumberList.txt”. If you peek inside, you’ll see that this file contains all the numbers from 1 to 10,000 written out in English. Copy this text file and paste it in the same folder as your InDesign document. Page Numbers to Words expects to find a plain text file called “PageNumberList.txt” in the same folder as the InDesign document. If it doesn’t, it will display an error message.
The 2005 edition of the International ISBN Agency's official manual[43] describes how the 13-digit ISBN check digit is calculated. The ISBN-13 check digit, which is the last digit of the ISBN, must range from 0 to 9 and must be such that the sum of all the thirteen digits, each multiplied by its (integer) weight, alternating between 1 and 3, is a multiple of 10.
If you’re a self-taught InDesign user, you may not have been introduced to automatic page numbering, one of the biggest time-saving features in the program. InDesign allows you to set up the page numbering feature in your Master Pages. Then, as you add or shuffle pages, InDesign updates individual page numbers accordingly. You can style the page number any way you like.
In Japanese, Chinese, or Korean versions, by default, Arabic numerals are used for page numbers. However, if you use the Numbering & Section Options command, you can specify the style of numbering, such as Roman numerals, Arabic numerals, Kanji, and so on. The Style option allows you to select the number of digits in the page number, for example, 001 or 0001. Each part of the document that uses a different numbering style is called a section. For more information on sections, see Define section numbering.
Now, select the relevant page icon in the Pages Panel which represents the page you want to set as the first page of the second section of your document. In this example, this is Page 7 (which is currently numbered as vii). As before, go to the drop-down menu in the Pages Panel and select Numbering & Section Options… to open the Numbering & Section Options window. Again, check Start Page Numbering at, and from the Style drop-down menu select 1, 2, 3, 4… from the options available. Click OK.
Word numbers all your pages, but those numbers remain hidden unless you tell Word to display them. By inserting a field code anywhere on the page, you can tell Word to reveal the page number. This option gives you fine control over page numbers. It also lets you put numbers anywhere you need and not just in the headers, footers, and margins. For example, you could put them in a text box if you wanted to.
Bullets and Numbering options in InDesign aren’t just for boring lists. You can auto-number items like captions, even incorporating prefixes like figure labels. Depending on how your document is set up, there are two ways to achieve this. Both involve setting up a paragraph style that incorporates numbering from the Bullets and Numbering feature. Generally I create a temporary text frame—often on my pasteboard—and set some items to create my style, pasting the text into my actual caption frames after the fact.
An InDesign document can only have one chapter, and these chapters are typically combined in an InDesign book. To insert a chapter number, create a text frame where you want the chapter number to appear on either a document or master page. Click on the "Type" menu, then "Text Variables," "Insert Text Variable" and then "Chapter Number." Update the chapter number if necessary to keep your chapter numbers consecutive by clicking on "Numbering & Section Options" in the Layout menu.

Do not let me lead you into a headache under false pretences: this FAQ is not going to tell you how to fix a document that contains broken numbering. It simply explains how the numbering works: this is valuable information if you work with Word a lot, and by understanding it, you can often work out how to fix a document. However, this FAQ is not going to tell you how.  (For a discussion of methods, see: List Restart Methods).

You can use Microsoft Word to create complex documents. Books and other large documents occasionally require different page number formats in different sections of one document. For example, you can number the index pages with Roman numerals (for example, "i.", "ii.", "iii.") and the main document with Arabic numerals (for example, "1", "2", "3"). This article describes how to set up different page numbering formats.


If you ever end up formatting a large book or magazine, then knowing the trick to adding page numbers is a blessing you will be thankful for. You’ll save hours of copy-pasting, and your designs will look sharp, attractive, well thought out, and uniformly excellent. Hopefully this tutorial passed on to you something that you will use many times over.
Starting an auto-numbered paragraph is deceptively simple. See those buttons on the top row of the Paragraph section of the Home tab? The left-most one is for bullets; the next two to its right are for numbering and multi-level numbering, respectively. Simply click the button to toggle the feature on, or click on the drop-down arrow on each button to select a specific style. If you don’t like any of the delivered choices, you can click Define New to set your own.
If the list you want is as simple as "1", "2", "3", you'll appreciate how easy it is to apply this type of numbering in legal documents. Simple numbered lists are different in Word 2000 than they were in Word 97. In Word 2000, the default for even the most basic list is multi-level. For example, if you number an item and press Enter and then press the TAB key, Word automatically formats this number as the second level in an outline numbered list format. Single and multi-level numbering are explained later in this chapter.
×