The 2005 edition of the International ISBN Agency's official manual[43] describes how the 13-digit ISBN check digit is calculated. The ISBN-13 check digit, which is the last digit of the ISBN, must range from 0 to 9 and must be such that the sum of all the thirteen digits, each multiplied by its (integer) weight, alternating between 1 and 3, is a multiple of 10.
This feature is easiest to use when you combine it with Word's built-in heading styles. However, you can map a custom heading style to the multilevel numbering feature—it just takes more work. Word handles nine levels, but any document with more than four levels should receive a serious developmental edit. More than four becomes confusing and perhaps worse, unreadable.
The Port PS service may only be accessed by a "User" of the NPAC/SMS; i.e., an entity having executed the appropriate regional NPAC/SMS User Agreement(s) with NeuStar. The use of any data accessed through Port PS is at all times subject to each such NPAC/SMS User Agreement, which provides that the exclusive use of such data is for the purpose of routing, rating, or billing a call, or the performance of network maintenance in connection with the provision of telecommunications services, and for no other purpose, including, without limitation, commercial exploitation.

The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
A quick way to create a bulleted or numbered list is to type the list, select it, and then click the Bulleted List or Numbered List button in the Control panel. These buttons let you turn the list on or off and switch between bullets and numbers. You can also make bullets and numbering part of a paragraph style and construct lists by assigning styles to paragraphs.
{\displaystyle {\begin{aligned}s&=(11-(((0\times 10)+(3\times 9)+(0\times 8)+(6\times 7)+(4\times 6)+(0\times 5)+(6\times 4)+(1\times 3)+(5\times 2))\,{\bmod {\,}}11)\,{\bmod {\,}}11\\&=(11-(0+27+0+42+24+0+24+3+10)\,{\bmod {\,}}11)\,{\bmod {\,}}11\\&=(11-(130\,{\bmod {\,}}11))\,{\bmod {\,}}11\\&=(11-(9))\,{\bmod {\,}}11\\&=(2)\,{\bmod {\,}}11\\&=2\end{aligned}}}
In many new planned neighborhoods of Portugal houses and other buildings are identified by a lote (plot) number without reference to their street. This is in law the número de polícia, which literally means police's number — the police formerly assigned the numbers rather than the town hall. The lote is the construction plot number used in the urban plan, a consecutive number series applies to a broad neighborhood. In theory and in most cases, the use of a lote number system is provisional, being replaced by a traditional street number system some time after the neighborhood is built and inhabited. In some neighborhoods, lote numbers are kept for many years, some never being replaced by street numbers.
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.

In summary, paragraph numbering is really just an exercise in logic, and this blog post is showing the numbering styles for a very specific project. Your project may be similar, but not exactly the same. You just need to think though the levels and how you want to restart the numbers. I do my best to think it through correctly the first time, set it up, and then try as hard as I can to break it, so that I can find my errors. The good news is that once you get your numbers working, you shouldn’t ever have to think about it again.


ISBN issuance is country-specific, in that ISBNs are issued by the ISBN registration agency that is responsible for that country or territory regardless of the publication language. The ranges of ISBNs assigned to any particular country are based on the publishing profile of the country concerned, and so the ranges will vary depending on the number of books and the number, type, and size of publishers that are active. Some ISBN registration agencies are based in national libraries or within ministries of culture and thus may receive direct funding from government to support their services. In other cases, the ISBN registration service is provided by organisations such as bibliographic data providers that are not government funded.[15]
If you want to use a bullet found in a specific font (such as the pointing hand from Dingbats), be sure to set the bullet to remember that font. If you use a basic bullet character, it’s probably best not to remember the font, because most fonts have their own version of that bullet character. Depending on whether you select the Remember Font With Bullet option, a bullet you add can reference either a Unicode value and a specific font family and style, or just a Unicode value.
Let's say you just created a paragraph in Heading 1 style. Now, you press Enter to go on to create the next paragraph. What style will that paragraph be in? You can modify a style to stipulate the style Word uses for the following paragraph. So you could set it up so that, when you're entering text, a Heading 1 will be followed by a Heading 2. And, you could set it up so that a paragraph in Heading 2 will be followed by a paragraph in style Body Text.
There are lots of options. For instance, you might reduce the amount of space between the number and the text by changing the Text indent at setting. Or, you might center the heading by choosing Center from the Number alignment dropdown. For even more options, click More to expose several more settings. You could use the Apply changes to option when setting level 1 to the I, II, III numbering style instead of changing it for each level.
There are over 160 ISBN Agencies worldwide, and each ISBN Agency is appointed as the exclusive agent responsible for assigning ISBNs to publishers residing in their country or geographic territory. The United States ISBN Agency is the only source authorized to assign ISBNs to publishers supplying an address in the United States, U.S. Virgin Islands, Guam and Puerto Rico and its database establishes the publisher of record associated with each prefix.
When the “Current Page Number” placeholder sits on a master page, every page to which you assigned that specific master page will display this variable – the number will change automatically on every page. If you change the style assigned to the placeholder on the master page (let’s say you set it to bold), all page numbers will update to that style (all numbers will become bold).

In Russia and many other former USSR countries, the European style is generally used, with numbers starting from the end of the street closest to the town center. Buildings or plots at street intersections may be assigned a composite number, which includes the number along the intersecting street separated by a slash (Russian: дробь), like in Нахимова, 14/41 (14 is the number along Nakhimova street and 41 is the number along intersecting street).


A nong, sometimes translated as "lane", refers to a block of buildings. So if in the above example the last building is followed by an enclosed compound, it will have the address "lane 31, Wuming Rd". A nong is further subdivided in its own hao, which do not correlate with the hao of the street, so the full address of an apartment within a compound may look like "Apartment 5005, no. 7, lane 31, Wuming Rd".
The 2005 edition of the International ISBN Agency's official manual[43] describes how the 13-digit ISBN check digit is calculated. The ISBN-13 check digit, which is the last digit of the ISBN, must range from 0 to 9 and must be such that the sum of all the thirteen digits, each multiplied by its (integer) weight, alternating between 1 and 3, is a multiple of 10.
You may wish to create a cross reference to an equation, a statement in your document such as "As was shown in Equation 3...", but you want Word to insert the appropriate equation number, and update it if the number of the equation should change. At first glance it would appear that you could do an Insert,Cross-reference and select "Equation" as the reference type. However, this will only work if you let Word caption your equations, and Word will only caption an equation above or below the equation, which is not acceptable. The only way to cross reference an entity that you have numbered yourself via a seq Field, is to Bookmark the sequence number.
In Japanese, Chinese, or Korean versions, by default, Arabic numerals are used for page numbers. However, if you use the Numbering & Section Options command, you can specify the style of numbering, such as Roman numerals, Arabic numerals, Kanji, and so on. The Style option allows you to select the number of digits in the page number, for example, 001 or 0001. Each part of the document that uses a different numbering style is called a section. For more information on sections, see Define section numbering.
The infill numbering system avoids renumbering the entire street when developments are modified. For example, Mannerheimintie 5 (a large mansion house on a large city plot) was demolished and replaced with 4 new buildings each with 2 stairwells all accessible from Mannerheimintie. The 8 new access stairwells are labelled A B C D E F G and H (each with the letter visible above the stairwell). Each stairwell has 4 apartments on 5 floors, so the new development has 160 new addresses in all running from Mannerheimintie 5 A 1 through to Mannerheimintie 5 H 160. The opposite example is where old, narrow buildings have been combined; Iso Roobertinkatu 36, 38 and 40 were demolished in the 1920s and the new building has the address Iso Roobertinkatu 36-40.

There are three settings we need to embed in this field. The first is to tell it what kind of numbering we want to do (in this case, “First, Second, Third”), what case we want to use (upper case, title case, etc.), and a switch to tell Microsoft Word to increment the numbers. Click each of these settings as shown below, being sure to click Add to Field after each one:
International Numbering Plans is specialised in world-wide (tele)communications related numbering plans, and offers a range of on-line services for a variety of market segments in the global telecommunications sector. Most on-line services are free of charge for personal or limited use. For professional and business use various subscriptions are available.

So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!


As mentioned, page numbering doesn't always begin with the first page. For instance, in the example book document, you might want to avoid page numbering until the first page of chapter 1. In this case, you'd select the first page of chapter 1 — that's also the first page of section 2. Then, to enable page numbering for chapter 1 and beyond, you'd open the header (or footer, depending on where you want the page number to appear). On the Header And Footer toolbar (that Word launches when you open a header or footer), click Insert Page Number. In Word 2007 and 2010, click the Design context tab | Page Number (in the Header & Footer group) | Top of Page | Plain Number 1. (The last two options are preferential.)
So I'm going to click on all seven types, one at a time, and hit the Reset button. This resets them all to Word's original installation defaults, and I don't get weirded out by all the weird formatting it tries to pick up from previous documents. If they need to be Reset, the Reset button is available. Each time you hit Reset, you need to confirm that you want to do so.
You can also set up page numbering so that the position of the page numbers is different on odd and even pages. You’ll find that most books take this approach so that the page number appears toward the left side on the left (even) pages and toward the right side on the right (odd) pages. This prevents the page numbers from being obscured by the book’s binding and makes them easier to see as you flip through pages.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.
×