An ISBN is assigned to each edition and variation (except reprintings) of a book. For example, an e-book, a paperback and a hardcover edition of the same book would each have a different ISBN. The ISBN is 13 digits long if assigned on or after 1 January 2007, and 10 digits long if assigned before 2007. The method of assigning an ISBN is nation-based and varies from country to country, often depending on how large the publishing industry is within a country.

Now, select the relevant page icon in the Pages Panel which represents the page you want to set as the first page of the second section of your document. In this example, this is Page 7 (which is currently numbered as vii). As before, go to the drop-down menu in the Pages Panel and select Numbering & Section Options… to open the Numbering & Section Options window. Again, check Start Page Numbering at, and from the Style drop-down menu select 1, 2, 3, 4… from the options available. Click OK.
Do not let me lead you into a headache under false pretences: this FAQ is not going to tell you how to fix a document that contains broken numbering. It simply explains how the numbering works: this is valuable information if you work with Word a lot, and by understanding it, you can often work out how to fix a document. However, this FAQ is not going to tell you how.  (For a discussion of methods, see: List Restart Methods).
Choose the predefined scheme that's most similar to what you want. For instance, if you want sublevels indented, choose the indented form; similarly, if you don't want sublevels indented, choose the flush left form, as shown in Figure C. Try to make the best choice right now because changing your mind later will present so many problems that starting over will be easier.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
timdunn you just saved my life and my job. Why is this so hard and totally disconnected from how to set up Heading styles through the Styles options? I don't remember it being this hard in previous versions of Word. I wasted hours and hours today banging my head against a brick wall. Thanks so much for you helpful guidance and instructions. Lifesaver.

Michelle Castle began writing professionally in 2005. She has written technology news and tutorials for consumers, brochure and web copy for the Ehlers-Danlos National Foundation, and promotional materials for religious nonprofits including the International Pentecostal Holiness Church. Michelle has a Bachelor of Arts in English from Oklahoma State University.
For instance (presuming “Use absolute numbering” is selected), if on page 16 of the document the script finds a text frame with the style “PageNumbers” applied to it, it will read the 16th line in the PageNumberList.txt file, and copy the text it finds into that text frame. On the 17th page, it will read the 17th line and copy that text into the text frame, and so on. The end result might look like this:

The first conscription numbering was ordered by Maria Theresa in 1770 and implemented in 1770–1771. The series was given successively as the soldiers went through the settlement describing houses with numbers. Thereafter, every new house was allocated the next number sequentially, irrespective of its location. Most villages still use their original number series from 1770–1771. In cities, houses have been renumbered once or more often in order to be sequential – the first wave of renumbering came in 1805–1815. In 1857, the Austrian Emperor allowed a new system of numbering by streets. This new system was introduced in the biggest cities (Prague, Brno) in the 1860s. In 1884, land registration books were introduced and they used the old (conscription) numbers as a permanent and stable identifier of buildings. The new (orientation) numbers continue to be used concurrently.


Because this document has facing pages, we want to insert page numbers on both the left and right pages. For now, navigate to the bottom-right corner of the right-hand page by zooming in (Ctrl + [Windows] or Cmd + [Mac]). Select the Type Tool (T) from the Tools Panel (Window > Tools) and drag to create a small text frame, resting the top of the frame against the margin.
OfficeArticles.com provides examples of Formulas, Functions and Visual Basic procedures for illustration only, without warranty either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. The Formulas, Functions and Visual Basic procedures on this web site are provided "as is" and we do not guarantee that they can be used in all situations.
Street numbering took off in the mid 18th century, especially in Prussia, where authorities were ordered to "fix numbers on the houses ... in little villages on the day before the troops march in". In the 1750s and 60s, street numbering on a large scale was applied in Madrid, London, Paris, and Vienna, as well as many other cities across Europe.[3] On 1 March 1768, King Louis XV of France decreed that all French houses outside of Paris affix house numbers, primarily for tracking troops quartered in civilian homes.[4][5]

Or another use: InDesign supports traditional Hebrew numbering, which uses letters instead of numerals. However, there is a custom to replace certain numbers – numbers that, when converted to letters, spell out words with negative connotations, such a 304 (שד = demon) or 270 (רע = evil) – with more pleasant numbers (the letter order is simply switched around).


If the list you want is as simple as "1", "2", "3", you'll appreciate how easy it is to apply this type of numbering in legal documents. Simple numbered lists are different in Word 2000 than they were in Word 97. In Word 2000, the default for even the most basic list is multi-level. For example, if you number an item and press Enter and then press the TAB key, Word automatically formats this number as the second level in an outline numbered list format. Single and multi-level numbering are explained later in this chapter.
Currently the barcodes on a book's back cover (or inside a mass-market paperback book's front cover) are EAN-13; they may have a separate barcode encoding five digits called an EAN-5 for the currency and the recommended retail price.[47] For 10-digit ISBNs, the number "978", the Bookland "country code", is prefixed to the ISBN in the barcode data, and the check digit is recalculated according to the EAN13 formula (modulo 10, 1x and 3x weighting on alternating digits).
An ISBN should be assigned to each title or product, including any backlist or forthcoming titles. Each format or binding must have a separate ISBN (i.e. hardcover, paperbound, VHS video, laserdisc, e-book format, etc). A new ISBN is required for a revised edition. Once assigned, an ISBN can never be reused. An ISBN is printed on the lower portion of the back cover of a book above the bar code and on the copyright page.
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
Kate Cahill is a graphic designer, writer, and creative director who has developed content for print and web. As creative director, she has produced award-winning work for agencies focused on the pharmaceutical and health and beauty aid industries. She has also served as production manager, with responsibility for the successful fulfillment of long-run print contracts. Kate has been delivering training for Webucator clients since 2010. Her enthusiasm for cutting-edge technology, combined with hands-on practical experience, brings an added benefit to her classes. Kate teaches real-world techniques and integration of Adobe software, as well as Microsoft PowerPoint, to produce a fully developed and cohesive brand identity.

Select the Text Tool (T) and start dragging a text box that will wrap around the whole ticket including the crop marks. This is very important since the Data Merge will automatically calculate the duplication. Then open up the Text Frame Option (Command + B) and set the Inset spacing to 1p4 for the top and 1p8 for the left. Of course, you can place the text for the numbers anywhere you like. I set the numbers to a small text.

The calculation of an ISBN-13 check digit begins with the first 12 digits of the thirteen-digit ISBN (thus excluding the check digit itself). Each digit, from left to right, is alternately multiplied by 1 or 3, then those products are summed modulo 10 to give a value ranging from 0 to 9. Subtracted from 10, that leaves a result from 1 to 10. A zero (0) replaces a ten (10), so, in all cases, a single check digit results.

The critical thing to know here is that this option applies to the section of the document where your insertion point is currently placed. If you only have one section in your document, selecting the “Different First Page” option makes the current header and footer disappear from the first page of your document. You can then type in different information for your header or footer on the first page if you want.


After struggling with multi-level lists I finally figured out one of the major problems. If you are struggling but you haven't already read other tutorials, you definitely should, but this tip will be useful no matter what. Before setting or re-setting the list for a given heading, select "None". Then go back and select the list you want. For some reason if you try to switch directly from one list to another it does horrid things that I do not understand. Hope that helps.
The Port PS service may only be accessed by a "User" of the NPAC/SMS; i.e., an entity having executed the appropriate regional NPAC/SMS User Agreement(s) with NeuStar. The use of any data accessed through Port PS is at all times subject to each such NPAC/SMS User Agreement, which provides that the exclusive use of such data is for the purpose of routing, rating, or billing a call, or the performance of network maintenance in connection with the provision of telecommunications services, and for no other purpose, including, without limitation, commercial exploitation.
You can't use Word's Numbering feature to generate a multilevel numbering system, even if you use built-in heading styles. Figure A shows a document with two styled heading levels: Heading 1 and Heading 2. You can apply the Numbering option (in the Paragraph group) and Word will number the headings consequently, but the feature ignores different levels; if you expected 1, 1.1, 2, 2.1, and 2.2, you might be surprised. If you select the entire document first, Numbering not only ignores the different levels, but it also numbers the paragraphs!
timdunn you just saved my life and my job. Why is this so hard and totally disconnected from how to set up Heading styles through the Styles options? I don't remember it being this hard in previous versions of Word. I wasted hours and hours today banging my head against a brick wall. Thanks so much for you helpful guidance and instructions. Lifesaver.
I agree, MS documentation completely fails concerning multilevel lists. Additionally, it is not even close to being intuitive. But more than that, the controls for it are actually ambiguous and misleading. Then too…..there are still bugs in it. To be fair, there is nothing simple about this operation….but still….Microsoft, you've got bzillions of folks and could do this a little better. Whem my multilevel lists start going squirrely on me I usually make sure my active cursor is located in my list and then click >multilevel list>define new multilevel list. I check everything is set the way I want (it usually is) and hit "ok." So that seems to just refresh everything and set the list straight again. I don't know if it actually does define a new one (or how I would ever select it again if I wanted to) but that works best for me until MS fixes it.
Publisher 2010 includes various typography commands that are designed to help you embellish your text. Although Publisher's developers have touted this as a significant feature, it's important to note that many of these effects only work with a small number of fonts, such as Calibri, Cambria, and Gabriola. Still, if you're using these fonts the typography commands can enhance the appearance of your text.
Whenever you begin a new project, clear the settings out. There's a couple ways to do this. You can choose Tools Customize, and hit Reset Usage Data. But more than likely, you've forgotten to do that like I do. So, instead, when you go to use a bulleted or numbered list, go ahead and reset them all. I did not do anything special to show you the screenshot below. I just opened Word 2003, and hit Format Bullets and Numbering, and there it was, already like it is in the picture. Doesn't look like the default, does it? Nope!
A check digit is a form of redundancy check used for error detection, the decimal equivalent of a binary check bit. It consists of a single digit computed from the other digits in the number. The method for the ten-digit code is an extension of that for SBNs, the two systems are compatible, and SBN prefixed with "0" will give the same check-digit as without – the digit is base eleven, and can be 0-9 or X. The system for thirteen-digit codes is not compatible and will, in general, give a different check digit from the corresponding 10-digit ISBN, and does not provide the same protection against transposition. This is because the thirteen-digit code was required to be compatible with the EAN format, and hence could not contain an "X".
Another scheme is based on residential areas called cư xá. A cư xá is addressed by house number, road, and cư xá, for example "123 đường số 4 cư xá Bình Thới". Some localities still use an older address format based on neighborhood (khu): for example, in "7A/34 Tô Hiến Thành", 7A is the neighborhood number. This confusing format is being gradually phased out in favor of the more modern formats above.
The auto-indenting feature of bullets and lists has always frustrated me. EVERY time you apply a numbered or bulleted list, you've got to set the indents. I want my lists to be indented at the very left of the page, flush with the rest of the paragraphs. But no, Microsoft insists that you want them indented by 0.63cm and hanging at 1.27cm (WHY 0.63? Why not 0.7? Or 1.0cm? But that's a question for a different session.) (I know, it's because MS is American and still uses inches etc...)
×