It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
With outline numbering you can define different bullet styles for the different levels of a bullet list. Use the Bullets tab of the Numbering Style dialog box (not shown) to select the basic style. Return to the Options tab to customize the bullet for each indent level. Here you can set bullets to any character. See the Graphics tab for more bullets.
Hopefully what this InDesign tutorial will show you is that page numbering in InDesign is just as easy to do as it is any other program, and much easier than in most. InDesign allows for quick, easy, and automatic page numbering, and I’ll be showing you how to do that today. It’s a simple trick to learn, takes only a few short seconds, and will be a skill that you will be thankful for every time you need to use it. You can always refer back to this InDesign tutorial should you forget any of the steps.
I agree, MS documentation completely fails concerning multilevel lists. Additionally, it is not even close to being intuitive. But more than that, the controls for it are actually ambiguous and misleading. Then too…..there are still bugs in it. To be fair, there is nothing simple about this operation….but still….Microsoft, you've got bzillions of folks and could do this a little better. Whem my multilevel lists start going squirrely on me I usually make sure my active cursor is located in my list and then click >multilevel list>define new multilevel list. I check everything is set the way I want (it usually is) and hit "ok." So that seems to just refresh everything and set the list straight again. I don't know if it actually does define a new one (or how I would ever select it again if I wanted to) but that works best for me until MS fixes it.
Select the Text Tool (T) and start dragging a text box that will wrap around the whole ticket including the crop marks. This is very important since the Data Merge will automatically calculate the duplication. Then open up the Text Frame Option (Command + B) and set the Inset spacing to 1p4 for the top and 1p8 for the left. Of course, you can place the text for the numbers anywhere you like. I set the numbers to a small text.
This course offers in-depth instruction in all the core features and tools in Publisher 2016, the desktop publishing software from Microsoft. Author David Rivers demonstrates Publisher's features using real-world examples of the different kinds of publications you can create with Publisher, from greeting cards to brochures to newsletters. The course explains how to work with text frames and format and edit text; insert and position shapes, pictures, and tables; and customize and automate the layout and design of publications. Plus, learn about Publisher's features for sending out mass mailing with Mail Merge and sharing publications on the web or in print.
A defined list can be interrupted by other paragraphs and lists, and can span different stories and different documents in a book. For example, use defined lists to create a multi-level outline, or to create a running list of numbered table names throughout your document. You can also define lists for separately numbered or bulleted items that are mixed together. For example, in a list of questions and answers, define one list for numbering the questions and another for numbering the answers.
You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.
CK Note: Word 2007 - 2013 interface has an different automatic numbering scheme which I have been told is much less subject to corruption. Microsoft Word 2010 Bible by Herb Tyson, MVP. However numbering is still very imperfect in these later versions. I still recommend following Shauna Kelly's step-by-step instructions (see above) if setting up numbering in a template or in a document likely to be heavily edited. If you start without doing this and end up with "spaghetti numbering," fixing it will be a very large chore!
In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.
See Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering.
All Products and services accessed through this portal are provided "as is" and "as available", and neither Neustar nor its affiliates, officers, directors, employees, agents or assigns make any representations or warranties to you or to any third party including, without limitation, end users, whether express, implied or statutory, including, by way of example and not limitation, warranties of merchantability, accuracy, fitness for any particular purpose, title and noninfringement, or as to any other matter, all of which are herby expressely excluded and disclaimed.
All Products and services accessed through this portal are provided "as is" and "as available", and neither Neustar nor its affiliates, officers, directors, employees, agents or assigns make any representations or warranties to you or to any third party including, without limitation, end users, whether express, implied or statutory, including, by way of example and not limitation, warranties of merchantability, accuracy, fitness for any particular purpose, title and noninfringement, or as to any other matter, all of which are herby expressely excluded and disclaimed.

Each document in your book can be numbered, and these numbers can be used as automatic chapter numbers. Automatic will increment from the previous document’s number, or you can choose “Same as Previous in Book” if it’s still the same chapter but broken into two or more parts, or you can arbitrarily number it anything you want to. This can save time if you have a large number of chapters that change order frequently, since the numbers will update automatically.
The 2001 edition of the official manual of the International ISBN Agency says that the ISBN-10 check digit[41] – which is the last digit of the ten-digit ISBN – must range from 0 to 10 (the symbol X is used for 10), and must be such that the sum of all the ten digits, each multiplied by its (integer) weight, descending from 10 to 1, is a multiple of 11.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
One of the harder things to do in Adobe InDesign, surprisingly for a page layout tool, is to create multilevel or outline format numbered lists.  The right way to accomplish this, according to the folks at Adobe, is to create a Style for every level of the list you’d like to have! Here are Adobe’s instructions on how to do so (This content is taken directly from https://helpx.adobe.com/indesign/using/bullets-numbering.html#create_multi_level_lists):
This is how our document looks. It’s 16 pages long and has page numbers applied to it, as in Step 1, throughout. You can see that the main text of the book starts on Page 7 of the document, and that the page number marker has adjusted accordingly to mark this as 7. But we want this to be numbered as 1 in the book instead. So, let’s discover how to do just that.

c.1300, "sum, aggregate of a collection," from Anglo-French noumbre, Old French nombre and directly from Latin numerus "a number, quantity," from PIE root *nem- "to divide, distribute, allot" (related to Greek nemein "to deal out;" see nemesis). Meaning "symbol or figure of arithmatic value" is from late 14c. Meaning "single (numbered) issue of a magazine" is from 1795. The meaning "musical selection" (1885) is from vaudeville theater programs, where acts were marked by a number. Meaning "dialing combination to reach a particular telephone receiver" is from 1879; hence wrong number (1886).
×