You can also set up page numbering so that the position of the page numbers is different on odd and even pages. You’ll find that most books take this approach so that the page number appears toward the left side on the left (even) pages and toward the right side on the right (odd) pages. This prevents the page numbers from being obscured by the book’s binding and makes them easier to see as you flip through pages.
Notice that the Font option (when you applied italics) changes only the number, not the heading text. To update the heading text, modify the heading style as you normally would. Word assumes you want all Heading 1 and Heading 2 styles included in the new numbering scheme. If you want to omit a heading level from the scheme, don't use a built-in heading style to format those headings.
A quick way to create a bulleted or numbered list is to type the list, select it, and then click the Bulleted List or Numbered List button in the Control panel. These buttons let you turn the list on or off and switch between bullets and numbers. You can also make bullets and numbering part of a paragraph style and construct lists by assigning styles to paragraphs.
Check the Restart Numbering After option, if you want sublevel numbers to start at 1. In most cases, you'll want to set the After option to the previous heading, as shown in Figure F. Doing so forces Word to start renumbering Heading 2 paragraphs after each new Heading 1 paragraph. In other words, when Heading 1 updates to 2, the sublevel number will start over at 1, generating 2.1, 2.2, 2.3, and so on.
^ Rose-Redwood, Reuben (2009) [originally published in 2008 in Journal of Historical Geography but revised in 2009]. "Indexing the Great Ledger of the Community: Urban House Numbering, City Directories, and the Production of Spatial Legibility". In Berg, Lawrence D.; Vuolteenaho, Jani. Critical Toponymies: The Contested Politics of Place Naming. Ashgate Publishing, Ltd. p. 199. ISBN 978-0-7546-7453-5. Retrieved 26 September 2015.
automatic page numbering Adobe Indesign CC 2014, how to insert page numbers. How to skip page number on cover page and back cover. How to start page number 1 after cover and contents page. How to start and end page numbering where you want.Macbook pro, iMac, macbook air, macbook, macbook retina display, macbook retina display 2, mac pro, iMac retina 5k display , mac mini,apple laptop ,custom page numbering. Page numbering tricks in Indesign CC, adobe indesign 2014. Page numbers. all about page numbers indesign. Page numbering advance Indesign. Windows, laptop, desktop.tutorial . how to page number indesign

To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.
In Uruguay, most house numbering starts at a high number among the hundreds or the thousands. The system is similar to the French-Spanish one: when a house is divided the term 'bis' is added with the difference that no single term designates the third: when a house is divided or added between another the term 'bis' is repeated as many divisions have been made or houses added in between, for example '3217 bis bis' corresponds to the third house from the 3217th, and so on, when many houses are merged the lowest number is used, leaving the in-between numbers missing.[19] Also there are cases when no number is assigned, this occurs mostly in peripheral areas inside the cities, low house numbering occurs in small locations and in balneary areas houses are designated by name rather than number.

In some older streets in northern and eastern Germany, mainly in the former Kingdom of Prussia and adjoining areas, including parts of Berlin and Hamburg, the "horseshoe" numbering system (counter-clockwise "boustrophedon"-style numbering) was used for the numbering of new streets up until the 1920s, after which the European system was introduced for new streets.
In Japan and South Korea, a city is divided into small numbered zones. The houses within each zone are then labelled in the order in which they were constructed, or clockwise around the block. This system is comparable to the system of sestieri (sixths) used in Venice. Visitors to a large, complex city like Tokyo often must resort to asking for directions at a local police substation.
The national ISBN agency assigns the registrant element (cf. Category:ISBN agencies) and an accompanying series of ISBNs within that registrant element to the publisher; the publisher then allocates one of the ISBNs to each of its books. In most countries, a book publisher is not required by law to assign an ISBN; however, most bookstores only handle ISBN bearing publications.[citation needed]
To modify the options, click the Multilevel List option (in the Paragraph Group). Word selects all lists currently in use in the List Library. You'll see two options below the gallery: Define New Multilevel List and Define New List Style. Use the first to create and save a stable custom list style. You'll use the second to change list styles. You can also use the latter to create a new style. So, what's the difference? The Define New List Style option lets you name a style, so you can share, modify, and delete it later. Most users will never need this option. Now, let's move on: choose Define New Multilevel List. Figure D shows the resulting dialog.

Soviet era housing districts (microdistricts) often have a complicated network of access lanes thought too small to merit their own names. Buildings in these lanes are ascribed to larger streets which may be quite far from their location; a building placed along a street may sometimes be ascribed to another street, which sometimes makes finding a building by its address a challenging task.
{\displaystyle {\begin{aligned}s&=(11-(((0\times 10)+(3\times 9)+(0\times 8)+(6\times 7)+(4\times 6)+(0\times 5)+(6\times 4)+(1\times 3)+(5\times 2))\,{\bmod {\,}}11)\,{\bmod {\,}}11\\&=(11-(0+27+0+42+24+0+24+3+10)\,{\bmod {\,}}11)\,{\bmod {\,}}11\\&=(11-(130\,{\bmod {\,}}11))\,{\bmod {\,}}11\\&=(11-(9))\,{\bmod {\,}}11\\&=(2)\,{\bmod {\,}}11\\&=2\end{aligned}}}
To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.

Gift certificates and promotional coupons can play an important role in your marketing strategy by drawing new and repeat customers to your business. However, how can you tell if they are really working to help you develop your business? To make the most of your time and your marketing budget, you need to track the success of your marketing efforts so that you can determine what marketing tactics are effective for which customers.
When you are ready to restart numbering, you can use the technique above, or you can place your cursor inside a numbered paragraph above, click the Format Painter (the paintbrush icon on the Home tab under Clipboard), then click on the line where you want to restart numbering. Using Format Painter this way solves several paragraph numbering problems (the number sequence, indents, and inter-paragraph spacing) simultaneously.

In some older streets in northern and eastern Germany, mainly in the former Kingdom of Prussia and adjoining areas, including parts of Berlin and Hamburg, the "horseshoe" numbering system (counter-clockwise "boustrophedon"-style numbering) was used for the numbering of new streets up until the 1920s, after which the European system was introduced for new streets.
A defined list can be interrupted by other paragraphs and lists, and can span different stories and different documents in a book. For example, use defined lists to create a multi-level outline, or to create a running list of numbered table names throughout your document. You can also define lists for separately numbered or bulleted items that are mixed together. For example, in a list of questions and answers, define one list for numbering the questions and another for numbering the answers.
After years in the graphic design and art industry, there’s one thing that I can’t understand: why designers try to get along without Adobe InDesign. I’ve been using this program for many years, and it’s helped me work efficiently and productively. I’ve created this website to show everyone that InDesign is a program that you can and should learn, and the best program for layout and desktop publishing. If you’re interested, check out my book on creating an ePub with InDesign. It’s got all you need to know in order to take your eBook from the final draft to an interesting and well-formatted ePub book.

In Uruguay, most house numbering starts at a high number among the hundreds or the thousands. The system is similar to the French-Spanish one: when a house is divided the term 'bis' is added with the difference that no single term designates the third: when a house is divided or added between another the term 'bis' is repeated as many divisions have been made or houses added in between, for example '3217 bis bis' corresponds to the third house from the 3217th, and so on, when many houses are merged the lowest number is used, leaving the in-between numbers missing.[19] Also there are cases when no number is assigned, this occurs mostly in peripheral areas inside the cities, low house numbering occurs in small locations and in balneary areas houses are designated by name rather than number.

So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!


A check digit is a form of redundancy check used for error detection, the decimal equivalent of a binary check bit. It consists of a single digit computed from the other digits in the number. The method for the ten-digit code is an extension of that for SBNs, the two systems are compatible, and SBN prefixed with "0" will give the same check-digit as without – the digit is base eleven, and can be 0-9 or X. The system for thirteen-digit codes is not compatible and will, in general, give a different check digit from the corresponding 10-digit ISBN, and does not provide the same protection against transposition. This is because the thirteen-digit code was required to be compatible with the EAN format, and hence could not contain an "X".
Microsoft Publisher, the desktop publishing component of the Professional version of the Office Suite, can perform many time-saving tasks for busy business owners, including layout and design work. It can even help you avoid a shopping run to try to find tickets for your next employee picnic, holiday giveaway or executive board meeting. Create your own tickets, including the vital sequential ordering needed for raffles or attendance tracking, using Publisher’s page numbering. With a few tricky manipulations of the page number process, you can start running the numbers in an entirely new fashion.
In Russia and many other former USSR countries, the European style is generally used, with numbers starting from the end of the street closest to the town center. Buildings or plots at street intersections may be assigned a composite number, which includes the number along the intersecting street separated by a slash (Russian: дробь), like in Нахимова, 14/41 (14 is the number along Nakhimova street and 41 is the number along intersecting street).
To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
Drag the number, which Publisher defaults to “1,” into place on the ticket. To change the sequence, such as to start with “100” instead of “1,” click the “Page Number” button again and choose “Format Page Numbers.” Click the “Start this section with” radio button and type the new number into the field. Click the “OK” button to have Publisher update the ticket number.
For example, often, preliminary pages in a book will be numbered with roman numerals, with renumbering restarting at 1 with the first page of the main section of the book. This is an option that can be set in the Section Options dialog box. If your document has 12 prelims, and page 13 of the document is set to restart the numbering at one, choosing “Absolute numbering” in the Page Numbers to Words script will insert “Thirteen” in a text frame on that page. If “Section numbering” is chosen, the text frame on page 13 will show “One”.
Where additional buildings are inserted or subdivided, these are often suffixed a, b, c, etc. (in Spain and France, bis, ter, quater). Where buildings are later combined, they may use just one of the original numbers, combine them ("13/15"), or give their address as a range (e.g. "13–17"; not to be construed as including the even numbers 14 and 16). Buildings with multiple entrances may have a single number for the entire building or a separate number for each entrance.
The creator of ShaunaKelly.com, Shauna Kelly, passed away peacefully on Wednesday November 16, 2011 after a long battle with ovarian cancer. If you are requesting permission to re-use any information on this site, then you may do so with appropriate acknowledgement of her work. If her words, thoughts or pictures have helped you, or made money for you, then please consider making a donation in her name to the Women's Cancer Foundation.
This check system – similar to the UPC check digit formula – does not catch all errors of adjacent digit transposition. Specifically, if the difference between two adjacent digits is 5, the check digit will not catch their transposition. For instance, the above example allows this situation with the 6 followed by a 1. The correct order contributes 3×6+1×1 = 19 to the sum; while, if the digits are transposed (1 followed by a 6), the contribution of those two digits will be 3×1+1×6 = 9. However, 19 and 9 are congruent modulo 10, and so produce the same, final result: both ISBNs will have a check digit of 7. The ISBN-10 formula uses the prime modulus 11 which avoids this blind spot, but requires more than the digits 0-9 to express the check digit.
For instance (presuming “Use absolute numbering” is selected), if on page 16 of the document the script finds a text frame with the style “PageNumbers” applied to it, it will read the 16th line in the PageNumberList.txt file, and copy the text it finds into that text frame. On the 17th page, it will read the 17th line and copy that text into the text frame, and so on. The end result might look like this:
A check digit is a form of redundancy check used for error detection, the decimal equivalent of a binary check bit. It consists of a single digit computed from the other digits in the number. The method for the ten-digit code is an extension of that for SBNs, the two systems are compatible, and SBN prefixed with "0" will give the same check-digit as without – the digit is base eleven, and can be 0-9 or X. The system for thirteen-digit codes is not compatible and will, in general, give a different check digit from the corresponding 10-digit ISBN, and does not provide the same protection against transposition. This is because the thirteen-digit code was required to be compatible with the EAN format, and hence could not contain an "X".
If you create a series of books you can’t use the same ISBN for them. You can use the same ISSN, however. Many fiction and nonfiction authors have an ISSN number assigned to their book series. ISSN stands for International Standard Series Number and can be purchased from the Library of Congress. However, each book in the series will need its own ISBN.
If you’re producing any kind of numbered items in-house that are multiple-up on a sheet where you need to control all the variables to meet your production needs, the autonumbering feature through numbered lists is the way to go! Just step and repeat away & InDesign will do all the work. No need to fool with a seperate “numbers” file or deal with a data merged document. I think it’s by far the best option for basic numbering.
Whenever you begin a new project, clear the settings out. There's a couple ways to do this. You can choose Tools Customize, and hit Reset Usage Data. But more than likely, you've forgotten to do that like I do. So, instead, when you go to use a bulleted or numbered list, go ahead and reset them all. I did not do anything special to show you the screenshot below. I just opened Word 2003, and hit Format Bullets and Numbering, and there it was, already like it is in the picture. Doesn't look like the default, does it? Nope!

Next, provide the script with a list of written-out page numbers. When you downloaded the script, included was a plain text file called “PageNumberList.txt”. If you peek inside, you’ll see that this file contains all the numbers from 1 to 10,000 written out in English. Copy this text file and paste it in the same folder as your InDesign document. Page Numbers to Words expects to find a plain text file called “PageNumberList.txt” in the same folder as the InDesign document. If it doesn’t, it will display an error message.


The heading here could be anything: affirmative defenses in an answer, articles in a contract, etc. It doesn’t matter; the technique is the same with only slight variations. The result is that you’ll have a heading saved in your Quick Parts that will be numbered correctly, no matter how many items you add or delete. This makes this technique particularly useful in building templates for common documents; because it’s always easier to delete than add, they’ll re-number themselves after editing.

Because this document has facing pages, we want to insert page numbers on both the left and right pages. For now, navigate to the bottom-right corner of the right-hand page by zooming in (Ctrl + [Windows] or Cmd + [Mac]). Select the Type Tool (T) from the Tools Panel (Window > Tools) and drag to create a small text frame, resting the top of the frame against the margin.
In Hong Kong, a former British colony, the British and European norm to number houses on one side of the street with odd numbers, and the other side with even numbers, is generally followed. Some roads or streets along the coastline may however have numbering only on one side, even if the opposite side is later reclaimed. These roads or streets include Ferry Street, Connaught Road West, and Gloucester Road.[9]

You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.


The standard method for displaying a page number in InDesign is to insert an Automatic Page Number Marker into a text frame (Text menu: Insert Special Character: Marker: Current Page Number). This is typically done on your master page(s) so that the page number will appear on every page using that master. If you wish to hide the page number on pages in your document, just use a different master that does not include the marker (or use the “None” master if you do not wish to display any master page items).


The creator of ShaunaKelly.com, Shauna Kelly, passed away peacefully on Wednesday November 16, 2011 after a long battle with ovarian cancer. If you are requesting permission to re-use any information on this site, then you may do so with appropriate acknowledgement of her work. If her words, thoughts or pictures have helped you, or made money for you, then please consider making a donation in her name to the Women's Cancer Foundation.
×