Now it’s time to add some color. Once again I used the Smart Fill Tool to add some new shapes that I would apply color to. With a shape selected, simply click on a color from the Color Palette or create a new color by clicking on the current color square located below in the bottom, right-hand corner of the Status Bar. It was important to have a limited color scheme for this design. So this design has two shades of green, two shades of tan, black and red.
One of the most requested features on the forum for RTF templates is to show a fixed number of rows per page. Maybe you have pre-printed stationary that can only take a certain number of lines, maybe you have a functional requirement for it. For whatever the reason id the functional folks have given it to you to implement.  Up until now there has been a template floating around that I think I let loose that shows how this can be done for invoices. There is little explanation of whats going on and how it's done. I'll try and make ammends to those of you that may have gotten a little lost but plugged it in anyway and it worked so what the heck.
There are three settings we need to embed in this field. The first is to tell it what kind of numbering we want to do (in this case, “First, Second, Third”), what case we want to use (upper case, title case, etc.), and a switch to tell Microsoft Word to increment the numbers. Click each of these settings as shown below, being sure to click Add to Field after each one:
So now on the A master page in your Adobe InDesign document you should have a capital A in the text frame that we created. This is more than just a capital A though, this represents the A master in your Adobe Indesign document and it means that on every page that is attached to your A master the corresponding page number will appear in that position on your page.
In its first versions, the CDR file format was a completely proprietary file format primarily used for vector graphic drawings, recognizable by the first two bytes of the file being "WL". Starting with CorelDraw 3, the file format changed to a Resource Interchange File Format (RIFF) envelope, recognizable by the first four bytes of the file being "RIFF", and a "CDR*vrsn" in bytes 9 to 15, with the asterisk "*" being in early versions just a blank.[33] Beginning with CorelDraw 4 it included the version number of the writing program in hexadecimal ("4" meaning version 4, "D" meaning version 14). The actual data chunk of the RIFF remains a Corel proprietary format.

With the Segment dimension tool, you also have the ability to measure the distance between the two most distant nodes in multiple segments. Using the Segment dimension tool , marquee select the segments, drag to position the dimension line, and click where you want to place the dimension text. You can also measure successive segments automatically by clicking the Automatic successive dimensioning button on the property bar, and marquee select the segments that you want to measure. Drag to the location where you want to place the dimension text and release.


Select the Text Tool (T) and start dragging a text box that will wrap around the whole ticket including the crop marks. This is very important since the Data Merge will automatically calculate the duplication. Then open up the Text Frame Option (Command + B) and set the Inset spacing to 1p4 for the top and 1p8 for the left. Of course, you can place the text for the numbers anywhere you like. I set the numbers to a small text.
CorelDraw (styled CorelDRAW) is a vector graphics editor developed and marketed by Corel Corporation. It is also the name of Corel's Graphics Suite, which includes additionally the bitmap-image editor Corel Photo-Paint as well as other graphics-related programs (see below). The latest version is marketed as CorelDraw Graphics Suite 2018 (equivalent to version 20), and was released in April 10, 2018.[1] CorelDraw is designed to edit two-dimensional images such as logos and posters.
Because this document has facing pages, we want to insert page numbers on both the left and right pages. For now, navigate to the bottom-right corner of the right-hand page by zooming in (Ctrl + [Windows] or Cmd + [Mac]). Select the Type Tool (T) from the Tools Panel (Window > Tools) and drag to create a small text frame, resting the top of the frame against the margin.
If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:
Bullets and Numbering options in InDesign aren’t just for boring lists. You can auto-number items like captions, even incorporating prefixes like figure labels. Depending on how your document is set up, there are two ways to achieve this. Both involve setting up a paragraph style that incorporates numbering from the Bullets and Numbering feature. Generally I create a temporary text frame—often on my pasteboard—and set some items to create my style, pasting the text into my actual caption frames after the fact.
Publisher lets you make a 3- or 4-panel brochure design on any of a number of paper sizes. Before deciding on whether to make a 3-panel or 4-panel brochure, you may want to fold a sheet of paper of the size you want to print your brochure on in thirds or quarters to help you decide which design you want to make. (A misprinted document is a good choice for this.)
Use "Format Page Numbers" for specific changes, like types of numbers and chapter headings. If you want to go the extra mile, double-click on the header or footer once again. Click "Page Numbers," then click "Format Page Numbers" under the menu that appears. From here, you can set different types of numbers, like Roman numerals or letters, as well as customize the basic appearance of numbers. It is not incredibly robust, but it works.
This is a good book for someone that is new to Corel Draw, and needs to use Corel Draw for publications. The book is a mix of publication and graphic basics, nd how to implement those basics in Corel Draw. The book is not designed to be a manual on all the features of Corel Draw, and may not cover everything for publications either, but it definitely gets one started. If one needs to make a decision between buying Corel Draw and other software that might be cheaper and more simple to use, this book can make buying Corel Draw worthwhile because it gets you going on features and methods not brought upfront by Corel or in Corel's user manual that comes with the software.
That’s it for the mascot but by simply adding logotype to this design we can create a full identity for this team. The first thing I did was find a font that was close to what I envisioned for this brand. Using the Text Tool (Toolbox > Text Tool or F8), I typed out the name of the team and then selected the font I liked from the Font List on the Property Bar.

With Corel PHOTO-PAINT & CorelDRAW, creating street art images, and later printing them out as stencils, is no problem. Actually, you have the perfect graphic software for this in front of you. Creating a Street Art editorial illustration for a magazine is no different, you just need a few extra tweaks and learn the word ’Superimposed’. This Street Art illustration will be placed on a brick wall. In others words, there is photo maniplualtion in play here.
With Corel PHOTO-PAINT & CorelDRAW, creating street art images, and later printing them out as stencils, is no problem. Actually, you have the perfect graphic software for this in front of you. Creating a Street Art editorial illustration for a magazine is no different, you just need a few extra tweaks and learn the word ’Superimposed’. This Street Art illustration will be placed on a brick wall. In others words, there is photo maniplualtion in play here.
Insert your company information. If you're using Publisher 2003, the program prompts you for this information the first time you use it. Afterwards, you select this information from Personal Information in the Edit menu to insert it in your brochure. In Publisher 2007 and 2010, you can select your company information set from the Business Information dropdown or select "Create new" to create a new information set. This information will be inserted into your brochure.
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
I should mention that the kind of bitmap I have selected here is probably not going to make a good object. It's more for line art and logos.If you were to look closely at the conversion of the bitmap you would find that it has create hundreds (thousands?) of arbitrary regions which it has filled with different colors. I have yet to find anything I could do to such an object that I couldn't do with the original bitmap. Still -- pretty nifty! In this case, I only wanted to show the dialog box, not the result so it's OK.
Help! Having a problem. I realize this is for CS5, which may be the issue. I’m working in CS6, and when I do this, it changes page 1 to a right-side page, completely affecting all of the spreads. I’ve tried to go into Document Setup to force it back, but it ends up making TWO right side pages for the first two pages! Perhaps a difference in versions, or maybe a bug?

Could you maybe write an article about numbered lists and levels specifically. I’ve been struggling with the “restart after previous level” option. I’ll briefly describe my problem. I have a level one and two numbered paragraph list style. I don’t want the first level to display the number so I delete the number placeholder. When you do this the level 2 doesn’t restart anymore. Is there an option to restart numbering after a certain paragraph style instead of having to manually click the restart numbering option. The “start at” option (set to 1 for ex.) gives every paragraph in the list the number one which also boggles me. What’s the point of the “start at” option?

Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.


The easiest way to implement a numbering scheme for headings is to add one to a heading style. To illustrate, we'll modify Heading 1 by adding a numbering scheme. First, right-click Heading 1 in the Styles gallery (in the Styles group on the Home tab). Then, choose Modify as shown in Figure A to launch the Modify Style dialog. If you thumb through the default properties, you'll not find a numbering scheme (Figure B). Click the Format button and choose Numbering as shown in Figure B. If necessary, click the Numbering tab. Choose the predefined scheme that's the best match for what you want (Figure C).
Now that you’ve created the separate section, you can change the format of the page numbers there. The first thing you’ll want to do is break the link between your new preliminary section and the next section where the main body of your document starts. To do that, open up the header or footer area (wherever you have your page numbers) in the main section of your document. On the “Design” tab in the “Header & Footer Tools” section of the Ribbon, click the “Link to Previous” option to break the link to the previous section’s header and footer.
Because this document has facing pages, we want to insert page numbers on both the left and right pages. For now, navigate to the bottom-right corner of the right-hand page by zooming in (Ctrl + [Windows] or Cmd + [Mac]). Select the Type Tool (T) from the Tools Panel (Window > Tools) and drag to create a small text frame, resting the top of the frame against the margin.

The steps in this article are going to show you how to add page numbers to the pages of your Publisher document. The page number will appear on every page of your document, at the location that you choose. Note that page numbers will also be included on any new pages that you add after inserting the page numbers, and they will update automatically if you delete any of the existing pages from the document.
In this situation I would suggest using an Alternate Layout. Once the content is final, choose Create Alternate Layout from the Pages panel menu. Make sure to create the new layout the same size and orientation as the original and then use the Numbering and Section Options dialog to specify the numbering required for the second catalog. The Print dialog will then let you select which layout to print.
×