I have installed MS 2007 home/studen on 2 computers in my home; a desktop and a laptop. The programs do not even have all the same fonts. The laptop has some fonts that the desktop doesn’t have and visa versa. Both systems are running Vista and both were installed with the same disk. I have also seen many occasions where the document comes through totally different.
© Corel Corporation. All rights reserved. The content herein is in the form of a personal web log ("Blog") or forum posting. As such, the views expressed in this site are those of the participants and do not necessarily reflect the views of Corel Corporation, or its affiliates and their respective officers, directors, employees and agents. Terms of Use / Privacy​ ​/ ​Cookies / Terms and Conditions / User Guidelines.

PSDs take up significant memory, which can sometime cause problems when exporting as PDF. I would recommend avoiding PSD files for simple images that could just as easily be flattened when saved as TIFF or EPS. But in cases where using a PSD file really solves a problem, make sure it is 300 PPI and in CMYK color mode, and keep it at its actual size. And when exporting to PDF, double-check that the transparency flattening is set to high.
Dear All, I have corel installed on two laptops. Both of these laptops have arabic support enabled via windows xp. I have been facing a very unusal problem, my problem is that one laptop writes digits in the Hindi numerical form (which are the digits that we use in the arabic writing), the other on doesnt, it only writes the Arabic numerical form (which are the digits used in the english langague). Both these computers have the same set of softwares on them. I have matched the settings for both on them in the control panel, and the font i use is the transparent arabic.

When you embed a series of images on a page, they typically look best when you align each image's left or right edge along the respective edge of the page. If you place them across the width of a document, they usually look best when their top or bottom edges are aligned. To align a series of images to the left or right down the page margin, click on the first image and then hold down the Shift key while clicking on each additional image until you’ve selected all of them. Next, click the Picture Tools tab on the Ribbon and click Format > Align > Align To Margin. Now click Format > Align > Align Left to align the images down the left margin, or Align Right to line them up down the right margin.

Pros: The first advantage is that it is a vector program, with which you can work on tracings and bring the designs to embroideries, engravings, prints among others, also supports the transparency of the TIF image files which other programs do not, allows editing fast, you can perform complex tasks with very few clicks, their tools are very intuitive and easy to use.
When working with large files in CorelDRAW, it may be required to increase the amount of memory allocated to the application. Default memory allocation is set to 25%. This can be increased to as high as 50%, though it is not recommended to exceed this level. Increasing this setting beyond 50% will reduce the amount of RAM being used by Windows, decreasing performance of the entire computer. It may also be required to change drives being used as swap disks. Drives with a high capacity of free space are ideally suited for swap disks. It is also recommended that the primary disk be set to a drive which does not contain the Windows partition. This will improve read and write times if specifying a drive with little or no disk activity.
try this…if you place all your graphics and set up a figure number style, and place some of your styles in an inline text frame and the ones that need to fall outside the text frame, the numbering will be off, UNTIL you take the blue anchor frame and anchor it to text of the stand alone graphics, then the figure numbers will then be in order. It also works on 11×17 pages where you have to link the figure number to the previous page and then Anchor Object options and use the Inline or above Line (position) to move text frame to the next page. :-)
Despite its lack of compatibility with Adobe products, Publisher still shines as a layout tool. Custom guidelines help you align objects on the page, while master pages give you control over elements that will appear on every page of a document, like page numbers or framing blocks of color. Publisher even has full support for CMYK-optimized printing. This is the printing format used by ink printers to produce clear, high quality printing.
Pros: I use this software from so many years ago and with the time they have always improve, I use this to modify and edit images vectorizing and making great design for my presentations, through the years Corel DRAW have added more features and options to make the design more complex and details, the bright options and the vectorizing tool are better than they were in the past, the details of the images is awesome and the extension are endless, for design this is one of my favorites.

First, add the image to your Word document, select the image, and choose Picture Tools on the Ribbon toolbar. Click Format > Wrap Text > Tight. Now, with the image still selected, click Format once more and choose Edit Wrap Points. A red line with black markers, called wrap points, will appear around the image. Adjust this line by dragging the wrap points: You can drag the wrap points inward to wrap text over the image, or drag them outward so that the text moves away from the image. Drag on the line itself to create additional wrap points, as desired. When you’re done, click away from the image, and the wrap points will disappear.

      When you create an account, you are asked to choose one of the two memberships: standard or premium. As a default, you are assigned a standard subscription. This allows you to access some online products along with some fonts. You will be informed of any updates that are available to be downloaded and those downloads will be applied if you choose.
At least 20% of the corrupted file case, the culprit comes from the Page Panel. That thing is a mess and Adobe refuse to recognize its related issues. The thing is that the Page Panel update itself LIVE while you modify the content. It’s DOUBLE the memory usage from reading the page content regardless of the size of the thumbnails and it doesn’t load its content with references to the masters, but instead with reference to individual pages. This means, if you got 75 elements per pages while 30 of those are part of the masters, those 30 are loaded multiple time in the RAM at once as its reference to each page “current” state. Turning off the Preview in the Thumbnails stabilize the document (especially when you move/add/remove pages), but come at the cost that you need to know where you are in the document with the pages numbers. Some might hate it because it requires them to use their brain a bit more (and we all know we’re already over-use it), but it’s a give to receive situation.
I love picas and points, and have used them almost exclusively since the early 90s (with QX, then InDesign). Of course, I use inches or cm for page sizes and such, but picas/points is just more convenient for fine-tuned positioning on the page. After all, there are almost 3 points in a single mm! I’d rather move something 1 pt than have to type .2 mm.

      Now I know this is a big change for Corel. Traditionally, they have been opposed to policing how many times you installed the program on x number of computers. They seemed to be more concerned with the number of users than how many paid licenses they had. I can remember that for years you could buy the upgrade version and install it as a full version without ever needing to show a previous version as your proof of ownership. In all my years of buying software, I had never seen this before CorelDRAW. Well I guess Corel, like everyone else, is trying to clamp down and control who is using the program. Because of this, I am sure there are a number of users out there who will now probably take a closer look at whether or not they will upgrade.
It is now the end of 2017.  I have the same problem and cannot find how Indesign 2018 automatically numbers footnotes in a book across documents.  Word has had this for at least a decade.  Is it really true, what I'm reading?  That one has to manually set the # from each document?  This is hell.  A few changes so that my first chapter-doc grows by one page and then I have to manually adjust every doc thereafter (and I have 12 chapters-docs).
There is an enhanced display of choices when browsing fonts in the Control, Character, and Properties panels font family menus. When you click the Font Family menu, there are two tabs at the top left (Figure 5): the “Fonts” tab shows currently installed or activated fonts. But here’s the cool one that is easy to overlook: The “Find More” tab previews Adobe Fonts that are available to be activated. Yes, that means instant access to thousands of fonts from within InDesign, without having to visit Adobe’s website.
You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.
      There is nothing more igniting to create a firestorm of debate than those issues that surround a TOS or EULA. If I only had a dollar for every time I listened to a podcast or read an article that related to the constant debate on this TOS and that TOS. I can tell you that people just hate it when a company or government even comes close to taking away or even treading close to their rights.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:
I agree with Sherry, Matt, and Jack that measuring in picas is easier and more logical than measuring in inches. And it is not true that only people who worked in newspapers understand picas. Most if not all the InDesign books I’ve gone through use picas and points in their illustrations. You can move or adjust objects by a tenth of a point (0.1 pt) or three-tenths without using a calculator.

The described numbering process is useful. I’m wondering what the Best Practice would be to ensure that the text frame containing the figure / section / chapter number remains locked to the figure that it refers to. A couple of attempts I’m tried haven’t been successful. Perhaps I’m not applying the technique properly or I’m unaware of another approach. Anyone have a suggestion or two?

If you are preparing a document for print, keep your margins and bleeds in mind from the beginning. Your printer will give you the measurements for the bleed, but generally 1⁄8 inch or 3 mm should suffice. Approximately the same area within the document should be kept free of text and important graphic elements (such as the logo). Set up your document for bleed in InDesign as you create it by selecting the correct settings in the document set-up box.
You could include things like empty spaces and paragraph breaks in your search if you know, for example, that the word that has to change is followed by a space. Insert these special characters by clicking the “@” arrow to the right of the Find box, or search for a particular glyph by going to the Glyph tab. Replacing glyphs one by one might be best, so that you can monitor your work and progress.

Adobe has changed the name of Typekit to Adobe Fonts. However, it still appears as Typekit in some programs, such as Photoshop, which will undoubtedly cause some confusion for a while. But the confusion goes deeper than just branding. After all, the font called Adobe Garamond is an “Adobe font,” because it was designed and developed by Adobe. But hundreds of other fonts were designed and developed by other non-Adobe font foundries, and only licensed to be distributed through Typekit. Unfortunately, those are now also called “Adobe Fonts.” So when you’re talking with someone about “Adobe Fonts,” you need to be clear whether you’re referring to the fonts from Adobe or “the service formerly known as Typekit.”

      So essentially you now have the option to pay $99 per year and always have the latest version of the software for the term of your premium membership. For example, if you pay the $99 membership fee, you will automatically receive version X7 when it is released. Or you can just buy the latest version of the software and keep the standard account. You will miss out on the so-called extra online content which, hopefully, will evolve and provide more reasons to choose the premium service.


I am just in the process of having a website designed and when I view the website on my desktop it looks fine. Everything is aligned, pictures and tables where they are suppose to be, but when I look at it on my office computer or home laptop, it looks a mess with the tables all distorted and pictures smaller and overlapping. The programmer is telling me there is nothing she can do about that….this seems strange considering I see everyone elses websites and they look consistent. I’m thinking she doesn’t have the experience to do the website. I sent her a 22 page PowerPoint presentation to use for the web design layout, but I’m not sure of what software she is using to to convert the Powerpoint file to a website. Does anyone have any suggestions? I’m really concerned about how unprofessional the site is going to look,
As I mentioned above, you can now convert footnotes to endnotes and endnotes to footnotes in your document. To convert footnotes and endnotes, choose Type > Convert Footnote and Endnote. In the dialog box, you can specify whether you want to convert all the endnotes and footnotes in your document or only from the selection. Also, when importing Word or RTF files, there is now an option to place Word endnotes as static notes. Choosing static notes imports endnotes the way they were imported in InDesign CC 2017 before InDesign’s own endnote feature was introduced.

I first refered directly to the chapter 1-level paragraph style, but then got problems when a new chapter started on a right-page and not a left page, some picutures refered the previous chapter style. I then copied the chapter 1-paragraph style and made small text boxes with just the paragraph number on each page that starts a new chapter. I changed the text colour to no colour.


One feature of the Adobe Creative Suite is the ability to copy and paste between its applications. But just because you can do this doesn’t mean you should. Vector files should still be created in Illustrator, and raster images should be saved in Photoshop. Not only will you be able to maintain control of these elements, but you’ll be saved from having to update every single occurrence of a given element in multi-page documents. Keep a given graphic in a separate Illustrator or Photoshop file, and you’ll be able to update all occurrences of it with one click.
Cons: A big handicap that corel has is the fact that it is not easy to learn or streamlined at all, for you to even create basic designs you need not only to learn every command it has but also to learn how they all work, and in some cases just using one basic command requires more than 5 steps, It is an excellent software but you will need to invest a lot of time to master ir.
I have a document which was created in Word and has 226 pages. When I send it to a client who is using a later version of Word, it looks totally different and has over 330 pages. How can I send the client the document without it changing? Also, they wanted a pdf version, which looks nothing like the Word document. How can I get the Word document to look like the pdf?
Pros: I have used this software for 3 years and I can verify that it is easy to learn, it also contains a great help panel, the automatic vectorization tool is incredible, the preview of the texts facilitates the design process, it contains a wide range of tools manual vectorization. in general lines it is a very complete software suitable for beginners and experts
Content-Aware Fit is not enabled by default. If you want to make it apply automatically to all placed images, turn on “Make Content-Aware Fit the default frame fitting option” in the General pane of the Preferences dialog box. You may find some type of graphics work well with the algorithm and some may not, so you may need to experiment with the images used in your workflow. In my experience, the feature seems to work better with raster images than with vector graphics.
- On occasion you may have content…you'd like appearing at the top of every page.…Maybe at the bottom of every page.…How about automatic page numbering for example.…That's what we're going to talk about in this movie…and we're going to do it with our with our…Landon Hotel newsletter we've been building.…And here as we look at page one,…zoomed in to see the whole page…I don't see any page numbering there.…If we go to pages two and three,…well it looks like there might be something up there…at the top left and top right hand corner.…So let's zoom in and I'm going to use the slider…and go to around 100% and just scroll up…to the top of the pages,…and let's move over to the left hand side.…

A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
×