If you know in advance that you need outline numbering for your paragraphs, you will want to choose the correct format from the Bullets and Numbering dialog box. Applying one of the preset formats to a paragraph or paragraphs that are already bulleted or numbered applies it to the entire list. There is a specific tab for outline numbers — the Outlined Numbered tab.
Track essential design details and key information with dynamic callout tools. Sticky callouts will connect or "stick" to source objects as they are moved around or modified. You can also link callout text to source shape metadata. Callouts based on object metadata are dynamic, helping you efficiently and consistently implement updates and changes.
- [Voiceover] When laying out artwork, it's easy to make sure that objects are properly aligned with other objects. In CorelDRAW, it can be done in a number of different ways. From the View menu, you'll see that I have the ability to select Grids, Rulers, Guidelines, as well as alignment guides. These are some of the tools that make it easy to align objects within the document. There's also the ability to do snapping. And of course I can snap to the document grid, baseline grid, guidelines, as well as objects and the page itself. Under the Tools menu, Options, then Document, here we have the ability to set up the frequency of guidelines, grids, rulers, and that sort of thing. I'm going to talk a little bit more about this in a few minutes. For now, let me just cancel this, and we're gonna take a look at the rulers. You'll notice that we have two rulers. One is a horizontal ruler across the top and we have a vertical ruler down the left-hand side. You may notice that our zero zero coordinate is bottom left-hand corner. If for some reason we wish to change that, it's easy enough simply by left-clicking where the rulers intersect, and I'm gonna drag and drop this to the top, left-hand corner of my page. That's effectively reset the zero zero coordinates to the top left corner. Now if I want to draw with better accuracy, I can actually left-click where the rulers intersect, hold the Shift key down, and drag the rulers right out onto the page. Makes it a lot easier to get down and get into the fine details when you're drawing on the document. I'm gonna hold the Shift key down, left-click and drag the rulers back to where they belong. Now the next way to assist in lining objects up is by using the grid. Underneath my View menu, I'll go down to Grid and I'm gonna select Document Grid. Here you can see our document grid is set up as a dot pattern. This is easy enough to change. From the Tools menu, go down to Options, highlight Grid, and here we can show the grid either as dots or as lines. I also have the ability to change the frequency of the grid. I'm going to change this to .5 And you'll see I have Snap-To is turned on. I'll click OK to this, and now set up the grid at .5 and now you can see if I draw a rectangle, I'm going to left-click and drag and I can move this rectangle around and you can see it's going to snap to the gridlines for me. Now the next way to assist in lining things up is to use Guidelines. But first, before I do that, let me go to the View menu down to Grid, and I'm going to turn off the document grid. Guidelines are created by dragging in from the rulers. So I can drag in from my horizontal ruler, left-click, and I'm going to drag down and I'll position a guideline here. I'll left-click my vertical ruler and I can position another guideline here. So it's very easy to bring guidelines out on the page, and I'll just say it's simply a matter of clicking on the ruler and dragging down onto the screen itself. You'll notice that these guidelines are blue while this one is red. The reason that is, is because this is a guideline that's currently selected. Let me just select my Pick tool and when I click on this guideline, you can see it's turned red. It's very easy to change the color of guidelines and one reason why you might want to do that is if you had multiple layers and you want guidelines on these multiple layers you can have separate colors for different layers. I'm gonna left-click on this green and I'm gonna drag and drop that on top of this guideline and that's gonna change that guideline green. Again, one that's currently selected and if I select this one, it will turn red. But if I deselect it or select a different guideline, then of course it goes back to the green. Now another way to add guidelines is to use the guideline docker. And there is a couple of different ways to get there. I can click on this little icon here to go to my guidelines. I can go to Windows, down to Dockers and select Guidelines, or quicker and easier, simply double-click on a guideline and that's going to open up the docker for me. In here I have the ability to very precisely position guidelines where I want them. Now the final way to align objects on the page is to use Alignment Guides. Let me go to the Windows menu, down to Dockers, then I'm going to select Alignment and Dynamic Guidelines. In here I want to turn on my alignment guides so it's simply a matter of clicking on this little icon. Now I've gone ahead and I've changed the color of this so that my alignment guides are now a darker brown. It's a lot easier for me to see. If for some reason you want to change the color, it's simply a matter of hitting the drop-down and I can select whatever color I want in here. By default, it's a light blue. So let's leave that as it is, and now when I create a rectangle, you'll notice that as I move around my page I have these alignment guides which allow me to very precisely position the next object that I'm creating. Again, left-click and drag, and again, very easy to align objects on the page. So with a little bit of set up, you can see how easy it is to have increased accuracy while creating your design.
CorelDraw (styled CorelDRAW) is a vector graphics editor developed and marketed by Corel Corporation. It is also the name of Corel's Graphics Suite, which includes additionally the bitmap-image editor Corel Photo-Paint as well as other graphics-related programs (see below). The latest version is marketed as CorelDraw Graphics Suite 2018 (equivalent to version 20), and was released in April 10, 2018.[1] CorelDraw is designed to edit two-dimensional images such as logos and posters.
On the "Prepress" tab you have the option of activating "Bleed Limit". Even if the current document does not have an active bleed, you can activate it while creating the PDF. But remember that the objects must extend out from the page limit. Activating the "Bleed Limit" does not automatically increase the size of objects used to create the design. Another option which is often useful is to activate "Crop marks" to indicate the limits of our design. For this reason it is important that the page size is the real size.
Choose the XVL Studio 3D CAD add-on option to get animation tools and work with 3D CAD Engineering files. XVL Studio 3D CAD Corel Edition adds native 3D CAD file format support to ensure support for assemblies and parts from 3D CAD systems, including CATIA, Inventor, PTC Creo, SolidWorks, NX as well as 3D CAD exchange file formats incl. STEP, JT, and others.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.

Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.


We use cookies to ensure that we give you the best experience on our website. We also use cookies to ensure we show you advertising that is relevant to you. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the BBC website. However, if you would like to, you can change your cookie settings at any time.
Another way to import images and text is to simply drag them onto the document (from Mac’s Finder or Windows Explorer). This will automatically create an image or text frame, import the content and create a link to that file. If you drag content on top of an existing frame, it will replace the existing content but leave the size and cropping intact.

      Again, as I have mentioned in numerous articles about CorelDRAW, the bottom line is: Is it worth the upgrade? Is it worth it to pay significantly more money to get the latest version? I think some of you will definitely need to think harder about that. As some of you are aware, I am not a big fan of how the recognition and identification industry has to take a back seat in terms of features that Corel makes available. Maybe this will change with the new policy but then again, maybe not. If everyone has to pay, then maybe they will finally bring some specific features to our industry that we need to make our workflow a lot easier and more efficient.
There is no set limit as to how many fonts can be installed in Windows XP, Vista, and Windows 7. For best performance it is recommended that only required fonts be installed at any given time. Having too many fonts installed can decrease performance and lead to font corruption. It is also recommended that TrueType and Adobe Type 1 fonts with the same name not reside within the Windows Fonts folder at the same time. Finally, checking for corrupt fonts periodically is also advised (corrupt fonts are usually zero kilobytes in size). These fonts must be removed from the Fonts folder in Windows.
As it's one of the many programs that come with Microsoft Office, there is a good chance you already have Publisher on your computer. It's been included with higher-end copies of Office for almost 20 years, offered as a lightweight alternative to professional layout software such as Adobe InDesign. Though it's rarely used in a professional capacity, Publisher remains a surprisingly capable desktop publishing application. It sports excellent typography tools and one of the best template selections we've ever seen. It comes up somewhat short in the area of graphics editing support, but given its strengths, especially its usefulness in creating long-form publications, Microsoft Publisher remains a great option for at-home users, earning our Top Ten Reviews Bronze Award.
If you have Office professional, it comes with MS Publisher. I use that for newsletters and flyers as it’s much easier to control where the text and photos appear. You’d still need to export it as a .pdf, otherwise most people wouldn’t be able to read it. And even if they had MS Publisher, they would still need to have the same fonts installed for it to look the same.
   However, one other thing that you can be assured of is that there is very little fanfare with the release of a new “service pack,” which has updates, fixes and/or enhancements for existing software. In fact, you might not even know the service pack exists unless your software notifies you. The same can be said for CorelDRAW. At the time of this writing, CorelDRAW had released four service packs since the initial release of version X6 in 2012.
More than one person can work simultaneously in a document. In Word Online and Word 2016, real-time presence helps you see where your co-authors are working in the document so that you don't create conflicts as you edit, and you can see changes as they're being made. Word 2013 supports simultaneous editing, but there is no presence indication, and changes can't be seen by multiple authors until the document is saved. To learn more about real-time co-authoring, see What's new in Word Online and Collaborate on Word documents with real-time co-authoring.
The ability to create custom paragraph and character styles is an excellent time-saving feature. This pane is visible in the work area by default, and if you’ve hidden it for some reason, you can bring it up by pressing Command/Control + F11. You can create styles exactly to your liking using many options; and then you can apply them to a portion of text with just one click.
If we want to work with columns, we can also determine the number of columns and distance between them in "Tools > Options > Workspace > Document > Guides > Presets > User Defined > Columns". An important detail is, not to be confused with Paragraph Text columns which involves splitting a block of text into two or more columns (Text menu > Columns…). Dividing the page into columns does not automatically separate the text or content ̶ it's just a visual reference.
Dear All, I have corel installed on two laptops. Both of these laptops have arabic support enabled via windows xp. I have been facing a very unusal problem, my problem is that one laptop writes digits in the Hindi numerical form (which are the digits that we use in the arabic writing), the other on doesnt, it only writes the Arabic numerical form (which are the digits used in the english langague). Both these computers have the same set of softwares on them. I have matched the settings for both on them in the control panel, and the font i use is the transparent arabic.
Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.

CorelDRAW Technical Suite 2018 Enterprise license customers gain exclusive additional collaboration and sharing benefits from the new connectivity of Corel DESIGNER and CorelDRAW to Microsoft SharePoint sites, giving you direct access to your organization’s Document Management System (DMS) right from within the visual communication authoring applications.
The true power of Microsoft Publisher is in the superb quality and selection of its templates. Unlike so many of its competitors, Publisher links to Microsoft Office's online template portfolio, which is regularly updated and sports crisp, clean designs that can easily jump-start your projects. The template selection isn't particularly huge – you can only expect access to about 700 different options, compared to the thousands that other software offers – but it's diverse, covering every type of project you might undertake. Microsoft hasn't tried to inflate its numbers by offering dozens of ugly variants of the same template, picking quality over quantity every time.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.

Corel draw has a number of associated programs which are sold as a package when you purchase Corel draw and these are created to work in the same. Photo paint allows you edit photos and othe images for many purposes. A very rounded package of graphic and desktop publishing tools. Corel draw allows you to save and export files in a wide range of types.

Sorry to hear it, but many thanks for the confirmation.  It will save me time looking for easier solutions.  I'll manually solve the problem this time, waiting until right before printing before I # the notes across docs manually, and think of a script if I continue to use InDesign after.  Still, I'm stunned that the coders have built in automatic page numbering, and yet not this.  Not much different for footnotes, as you suggest (check the final # of footnotes, increment by 1 and that is the # of the first footnote in the next doc), and as someone else mentioned. 
I have installed MS 2007 home/studen on 2 computers in my home; a desktop and a laptop. The programs do not even have all the same fonts. The laptop has some fonts that the desktop doesn’t have and visa versa. Both systems are running Vista and both were installed with the same disk. I have also seen many occasions where the document comes through totally different.
[Instructions and lists abstracted from Adobe Application Manuals. Adobe, the Adobe logo, Acrobat, Captivate, FrameMaker, Illustrator, InDesign, Photoshop, and RoboHelp are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. © Adobe Systems Incorporated.]
One feature of the Adobe Creative Suite is the ability to copy and paste between its applications. But just because you can do this doesn’t mean you should. Vector files should still be created in Illustrator, and raster images should be saved in Photoshop. Not only will you be able to maintain control of these elements, but you’ll be saved from having to update every single occurrence of a given element in multi-page documents. Keep a given graphic in a separate Illustrator or Photoshop file, and you’ll be able to update all occurrences of it with one click.

If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:


8 Oct 1996[13]	7	3, 4, 5, 6, 7	5, 6, 7	95, NT 4	Context-sensitive Property bar, Print Preview with Zoom and Pan options, Scrapbook (for viewing a drag-and-dropping graphic objects), Publish to HTML option, Draft and Enhanced display options, Interactive Fill and Blend tools, Transparency tools, Natural Pen tool, Find & Replace wizard, Convert Vector to Bitmap option (inside Draw), Spell checker, Thesaurus and Grammar checker. The suite included Corel Scan and Corel Barista (a Java-based document exchange format).

It is now the end of 2017.  I have the same problem and cannot find how Indesign 2018 automatically numbers footnotes in a book across documents.  Word has had this for at least a decade.  Is it really true, what I'm reading?  That one has to manually set the # from each document?  This is hell.  A few changes so that my first chapter-doc grows by one page and then I have to manually adjust every doc thereafter (and I have 12 chapters-docs).


Color styles can be combined into groups called harmonies. A harmony allows you to link color styles into hue-based relationships and modify them together as a set. By editing color styles in a harmony, you can quickly create a variety of alternate color schemes by shifting the colors together, or you can alter the color composition of your artwork in one step.
InDesign CC makes a lot of assumptions about you. For example, it’s pretty sure that your world view is pretty Dark. It thinks you understand picas. And it’s pretty sure that you don’t want to take advantage of that gorgeous display your monitor offers. I can’t tell you why it makes these assumptions—but I can tell you where to change them if they’re not working for you. So if you’ve never customized your InDesign preferences, just press Command+K (Mac) or Ctrl+K (Windows) to open the dialog box and follow along.

Publisher's greatest weakness is its lack of graphic design tools. Where other desktop publishing packages let you craft logos or touch up photographs, Microsoft Publisher supports neither. Instead, it sticks to simpler effects such as 3D extrusions, bevels and basic quickshapes. If you're not experienced with any sort of image editing or graphic design, you might not miss those omissions, but the ability to smooth out a blemish or recolor a stock logo can make all the difference between a template and a personalized publication. If you want a program that offers more graphic design tools, you might be interested in Xara Page & Layout Designer.
But not all documents can use the CMYK color mode, because it requires 4 inks. If you create a file with only two or three colors (e.g. blue and yellow) perhaps it is best to use only two or three colors (Spot Colors), such as Pantone colors. In addition, not all colors can be printed using CMYK, e.g. "Gold", "Silver", etc. Some bright colors can only be achieved by using special inks, and these cannot be achieved with CMYK. Spot colors are also important for "non-printing objects" (for example, an outline to die cut) or "overprinted objects" (such as UV varnish). It's not only vectors that can use spot colors, also bitmaps can use Spot Colors. On the Bitmap Menu go to Mode > Duotone and convert the bitmap to one ("monotone"), or more spot colors.
I then trawled through various forums and Parallels Desktop was being highly praised, so I purchased it right away from the Apple retailer Gravis. The software was installed quickly and without any difficulty and I’ve been using CorelDRAW on my Mac ever since with excellent performance. It runs quickly and smoothly and I find the seamless integration of Windows and Windows programs in the Mac OS interface with the Coherence view mode to be top notch.”

Regarding the display settings, InDesign users who are still using CS6 or earlier will often take a serious performance hit by setting “Display Performance” to “High-Quality Display” if they have any high-res raster images or complex vector graphics. I assume that this is due to there not being a 64-bit version of InDesign before CC. Even if you have a high-end machine, 32-bit programs can’t utilize all of your system’s resources. And even with the 64-bit CC version, you’ll have performance issues if you use enough high-res/complex graphics in one document. Unlike Photoshop and Illustrator CC, InDesign has no option to use graphical hardware acceleration – i.e. it can’t use a dedicated graphics card, so all of the computations have to be run through the CPU; this too can bottleneck it’s performance.

Ditch the Typical Display for High Quality might works for documents with fewer than 20-30 pages, but for document with 50+ pages, it’s actually involves an HUGE risk of corrupting your file. This is because of how InDesign, as a WYSIWYG software. (WYSIWYG is how we call software in which you see and works on the result live. It’s basically means “What You See Is What You Get”.)
Yes! As a professionally trained typographer of more than 25 years, picas and points are THE standard for good typography. By their lack of recent use, it’s indicative that instructors are glossing over this very easy and important way of understanding layout measurements (type is not done in inches, period – inches are for the document size). Doing math with picas is so much easier than in inches. Want to divide that 11″ tall (66 picas) page into thirds easily? That would be 22 picas … and in inches it’s a messy 3.66666666. That last measurement is especially fun to find when you’re placing guides in a document – but 22 picas is easy. Buy a pica gauge, which will show both picas and inches, to educate yourself on how to create exceptional type (the beauty of the words and their layout should carry a piece, not the images alone).

   For most of us, once we have upgraded, we never take the time to see exactly what was updated in the software. I must admit, I can be guilty of clicking on the update button with little regard for what is being installed on my system. Sometimes I upgrade CorelDRAW or other software updates and never really look at what has been changed or fixed within the service pack. I just assume it is better.
      Ok, I am no lawyer and do not want to be one. So pardon me if I miss a translation of a point with the TOS or EULA. I am not going to get into this in detail. If you are really concerned, then I suggest you type Terms of Service or EULA and CorelDRAW into Google. There are enough discussions on the web that relate to this topic to keep you going and to breed fire and brimstone in a few of you.
Word and Publisher were designed to provide specific solutions for different requests. If your document requires footnotes, endnotes, annotations, tables of contents or page numbers, use Word to create the document. Publisher's ability to position text and graphics, handle pantone images and merge text and images makes it ideal for brochures and other creative documents. You will save time and effort if you choose the correct application for your tasks.
There are many reasons why you might want to adjust the size of a layout, but the three most common adjustments are to page size, margins, or amount of bleed. It’s extremely easy to change any of these in InDesign, but changing them and altering your text frames and other page elements has long been a huge hassle. The new Adjust Layout feature in InDesign CC 2019 comes to the rescue.

I am just in the process of having a website designed and when I view the website on my desktop it looks fine. Everything is aligned, pictures and tables where they are suppose to be, but when I look at it on my office computer or home laptop, it looks a mess with the tables all distorted and pictures smaller and overlapping. The programmer is telling me there is nothing she can do about that….this seems strange considering I see everyone elses websites and they look consistent. I’m thinking she doesn’t have the experience to do the website. I sent her a 22 page PowerPoint presentation to use for the web design layout, but I’m not sure of what software she is using to to convert the Powerpoint file to a website. Does anyone have any suggestions? I’m really concerned about how unprofessional the site is going to look,
You can see, it's not only about the Font name and size, there are a lot of text attributes that can be used in the same style, including colors. And you can have several color styles, i.e. for footnotes, headers, etc. Editing a style will change the entire document in just one step. Remember that as with Color Styles, it is necessary to apply the style to an object/objects, so that replacing or editing a style that uses Garamond will change all text objects that have had this style applied, not each and every Garamond text object.
Leverage all the power you need with full support for technical publication standards, latest version .DWG CAD file import, and over 100 other data file formats to publish, share and output important technical documents. Using a diverse set of cross-media publishing and distribution capabilities, including CGM, WebCGM (incl. S1000D 4.2), SVG and PDF, you will ensure all of your important technical files will be delivered in a readable format.
When you have a multiple-page document, such as a brochure or catalog, using master pages will save you time. Master pages are used to automatically insert layout elements on various pages. All elements of the master page are placed onto any page you choose, and these are by default not selectable, which allows you to further develop the page without worrying about accidentally modifying the pre-defined elements (such as page numbers, grids and guides, and graphic elements).
Pros: It has a very old-school user interface, while also being very simple learn and grasp. It has a great variety of features -- while not as many as Adobe Illustrator or as versatile as Affinity Designer -- are still plenty in general to make good art and even work with raster images. It also has a good stylus support, making it great for complex vector illustrations. And its also very stable and reliable.

Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files. desktop numbering using publisher
×