My point is, if you (like myself) often work with large and/or highly complicated graphics, you may want to hold off on changing any global “Display Performance” settings and instead adjust the quality on a per-graphic basis. If you do change the global settings to “High-Quality Display” and start to notice the program lagging a bit, you should turn down the display settings of each graphic (starting with the largest) to “Typical Display” until that lag goes away. If you want to see a preview of what your graphics will ultimately look like use the “Presentation” (Shift+W) preview. Hope these tips help!
First, add the image to your Word document, select the image, and choose Picture Tools on the Ribbon toolbar. Click Format > Wrap Text > Tight. Now, with the image still selected, click Format once more and choose Edit Wrap Points. A red line with black markers, called wrap points, will appear around the image. Adjust this line by dragging the wrap points: You can drag the wrap points inward to wrap text over the image, or drag them outward so that the text moves away from the image. Drag on the line itself to create additional wrap points, as desired. When you’re done, click away from the image, and the wrap points will disappear.
At this point, you could click OK and start your document. But, let's modify the scheme instead. Click the Define New Number Format button. In the resulting dialog, click the Font button and choose Chiller from the Font list and click OK (only once). Click inside the Number format control—to the left of the example character—and enter Heading, as shown in Figure D. Click OK twice. If you check the properties now (Figure B), you'll find a numbering scheme. Click OK once more to return to the document. Heading 1 in the Styles Quick Gallery displays the new numbering scheme.
There is no set limit as to how many fonts can be installed in Windows XP, Vista, and Windows 7. For best performance it is recommended that only required fonts be installed at any given time. Having too many fonts installed can decrease performance and lead to font corruption. It is also recommended that TrueType and Adobe Type 1 fonts with the same name not reside within the Windows Fonts folder at the same time. Finally, checking for corrupt fonts periodically is also advised (corrupt fonts are usually zero kilobytes in size). These fonts must be removed from the Fonts folder in Windows.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files.

Hello, I am having way too much trouble with Indesign to the point I just hate this program. I changed the visualization of the document in preferences like you said to high quality but the document which is from Illustrator still looks like crap when before it looked good. Also, the option in object that also says to change the visual quality is greyed out and I have no clue why aor how to change it. Getting desperate here, please help!


Of course, there are several types of jobs: magazines, business cards, brochures, etc. It's almost impossible to talk about all, but most of the settings are common for all jobs. But remember: it's very important to talk to the printing company before you start, because each company has its own rules and requirements. Cost is an important factor in any job, and any change (such as a change in the size or colors used), even minimal, can result in a change to the final price of the job.
Use "Format Page Numbers" for specific changes, like types of numbers and chapter headings. If you want to go the extra mile, double-click on the header or footer once again. Click "Page Numbers," then click "Format Page Numbers" under the menu that appears. From here, you can set different types of numbers, like Roman numerals or letters, as well as customize the basic appearance of numbers. It is not incredibly robust, but it works.

In general, change the feature settings in the dialog box, and then save the settings. Styles and presets are stored in the document in which they are created. You can use the settings from another document by importing or loading the styles and presets from that document. In addition, most presets can be exported or saved to a separate file and distributed to other computers.
And I'll get there by choosing the Page that I want to affect.…In this case Page 9 and I'll double-click on that, so I can actually jump to it.…I'm going to select that page and then go to the Pages panel menu and choose…Numbering & Section Options.…You're going to also find that under the Layout menu, there it is, Numbering…and Section Options.…When you choose that, it let's you change the Page Numbers for any page you have…selected in the Pages panel, Right now it's set to Automatic Page Numbering,…
On occasion, re-installing CorelDRAW may be needed to update certain application files. When reinstalling CorelDRAW, turn off all non-critical background services and startup items. This will ensure that no other program conflicts with the installation routine. To disable service and startup items, refer to the instructions previously listed in this document.

Microsoft has a nice selection of support options, including helpful FAQs and tutorials on its website to forums on Facebook and other websites, you should be able to find answers to any questions you have. While email support is absent from Microsoft’s service, the company offers both telephone and live chat options. Live chat is one of the most convenient support options, providing answers to your questions in real time, and a rarity among desktop publishers.
Overall: Ever since i started using coreldraw i have helped so many companies advertise their products through graphic design, i have also help many organizations to spread information in a form of banner/flyers as well as wedding invitations and many other helpful things, i use the knowledge i have with coreldraw as a source of income for myself because i get paid pretty good when ever i create a banner or any graphic design content for a client.
However, there are a few caveats you need to know. First, you can only import comments on a PDF that was exported from InDesign CC 2019 or later. Second, don’t edit the InDesign document before importing comments; otherwise they may not be correctly positioned. And finally, PDFs created using the Book feature won’t work correctly in the PDF Comments panel.

We will create an imaginary logo, and we apply the Blue Style. Then, to create the background, double click on the Rectangle tool (Toolbox > Rectangle tool or F6), to create a rectangle the size of the page. We apply the Yellow Style, and we then create a gradient (we press the G-key to activate the Interactive Fill tool and drag the handles to adjust the gradient). Finally, we expand the size to cover the bleed area. As the card measures 90x50 mm, we will make the background of 96x56 mm, centered on the page (to center the background object, select and press P on the keyboard).
You may want to set out an essay with two different number styles. In academic essays Roman numerals start after the title page until the body of the essay begins. For example this may include an abstract, table of contents, executive summary etc… Arabic numbers start from the main body of the essay. To achieve this you will need to use section breaks in your document. Change the number format in the Page Number Format window.
However, note that just because you choose a font doesn’t mean your audience will see it. Fonts used for list or combo boxes are embedded (so the final viewer will definitely see them in the correct font). However, fonts you choose for text fields are not embedded in the PDF, and so the end user will only see the correct font if they’re using Adobe Acrobat or Reader and have those fonts active on their computer. If the fonts aren’t present, Acrobat and Reader will substitute Adobe Serif MM or Adobe Sans Serif MM.
      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.
In general, change the feature settings in the dialog box, and then save the settings. Styles and presets are stored in the document in which they are created. You can use the settings from another document by importing or loading the styles and presets from that document. In addition, most presets can be exported or saved to a separate file and distributed to other computers.
Word is not designed for handling large document collaboration, which includes sending clients reports. As Leo has suggested, create the PDF of your report and send that your client. If they want changes, have them communicate them back and you make the necessary changes and then PDF the revised report again. It’s the only way that you can be absolutely certain that your client sees what you intended.
Microsoft has a nice selection of support options, including helpful FAQs and tutorials on its website to forums on Facebook and other websites, you should be able to find answers to any questions you have. While email support is absent from Microsoft’s service, the company offers both telephone and live chat options. Live chat is one of the most convenient support options, providing answers to your questions in real time, and a rarity among desktop publishers.

      Well, there you have it. CorelDRAW has finally chosen to fall in with the rest of the software world and force users to be legal. This may seem a little harsh in tone, but this is really what they are doing. For some of you out there, the time has come for you to “pay the piper” if you choose to upgrade to a new version of CorelDRAW. To its credit, Corel will now be allowing multi-user discounts for those installs where there are a number of users. Is it right? Sorry, but yes it is. Most other software programs already have the same ELUA and TOS. Corel really is finally putting their proverbial foot down and saying, “We are going to control this in terms of each user having their own license.” If you are one of those people who buys one copy and installs it on ten computers in your office, then you will not be allowed to do this once you have upgraded to X6.1 or higher.


The CorelWORLD Real Life Video Tutorials was produced for the CorelWORLD Conference. The video package features more than 2.5 hours of tutorials on CorelDRAW, including extensive lessons on Corel® PHOTO-PAINT™. Discover how easy a difficult task can be when you apply the correct process, and see why things go wrong when you don't make the right choices. The tutorial package is included for free with the WorkPLACE Ready Training Package.
Sending a Word (or any format document) doesn’t convert anything when it is send as an attachment. The most common culprit, from my experience, is when the document uses fonts which the receiver(s) don’t have on their computer. In that case a different similar font is used. Using only fonts which come preinstalled on all Windows versions will solve many (but not all) of the incompatibility problems. Unfortunately, this won’t work on a different OS such as MacOS or Linux. The best solution is to convert the document to .pdf and it should work on all machines.

Publication design shouldn’t have to be complicated and if you use Microsoft Publisher, it won’t be. The software has a great drag and drop feature that allows you to quickly insert photos and other media into your publications. The drag and drop feature will save you no end of time. You can even drop content directly from your social media pages into your document!
The Newsletter Wizard gives you, as a default, four pages of newsletter with which to work.� For this project, we will only need two pages.� To become comfortable changing the Wizard-created template, we will guide you through the process of deleting two pages from the newsletter � namely, pages three and four.� This is easily done if you follow the steps below:
Publication design shouldn’t have to be complicated and if you use Microsoft Publisher, it won’t be. The software has a great drag and drop feature that allows you to quickly insert photos and other media into your publications. The drag and drop feature will save you no end of time. You can even drop content directly from your social media pages into your document!
I answer readers' questions when I can, but there's no guarantee. Don't send files unless requested; initial requests for help that arrive with attached files will be deleted unread. You can send screenshots of your data to help clarify your question. When contacting me, be as specific as possible. For example, "Please troubleshoot my workbook and fix what's wrong" probably won't get a response, but "Can you tell me why this formula isn't returning the expected results?" might. Please mention the app and version that you're using. I'm not reimbursed by TechRepublic for my time or expertise when helping readers, nor do I ask for a fee from readers I help. You can contact me at susansalesharkins@gmail.com.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
   For most of us, once we have upgraded, we never take the time to see exactly what was updated in the software. I must admit, I can be guilty of clicking on the update button with little regard for what is being installed on my system. Sometimes I upgrade CorelDRAW or other software updates and never really look at what has been changed or fixed within the service pack. I just assume it is better.
You create, edit, and preview the index using the Index panel (Window > Type & Tables > Index). The panel includes two modes: Reference and Topic. In Reference mode, the preview area displays complete index entries for the current document or book. In Topic mode, the preview area displays only topics, not page numbers or cross-references. Topic mode is used primarily for creating the index structure, whereas Reference mode is where you add your index entries.
×