If you’re like most designers, you spend a significant amount of time picking just the right font, including previewing the way it appears in different parts of your layout. So you’re going to be very happy about a new method of previewing and selecting fonts. Plus, InDesign CC 2019 introduces a new font type that supports glyphs with colors and gradients.
Publisher is included in higher-end editions of Microsoft Office, reflecting Microsoft's emphasis on the application as an easy-to-use and less expensive alternative to the "heavyweights" with a focus on the small-business market, where firms do not have dedicated design professionals available to make marketing materials and other documents. However, it has a relatively small share of the desktop publishing market, which is dominated by Adobe InDesign and QuarkXPress.
The "Color mode" refers to the way in which we use the file, in this case, for high quality printing. The first choice is between RGB or CMYK color modes. RGB has brighter shades but is only good for web and desktop printers (for example inkjet printers) and plotters, but not for commercial printing. RGB has 16.8 million colors and CMYK only 64,000 but all commercial printers use CMYK. If you use a RGB color profile, the color mode will change when the file is sent to print, and perhaps the result will be bad or inaccurate. Then, you should choose CMYK as the "primary color mode" in both dialogues of Tools > Color Management.
You can see, it's not only about the Font name and size, there are a lot of text attributes that can be used in the same style, including colors. And you can have several color styles, i.e. for footnotes, headers, etc. Editing a style will change the entire document in just one step. Remember that as with Color Styles, it is necessary to apply the style to an object/objects, so that replacing or editing a style that uses Garamond will change all text objects that have had this style applied, not each and every Garamond text object.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
- [Voiceover] Hi and welcome to Publisher 2016 Essential Training, I'm David Rivers. If you need to lay out graphics-intensive documents that are specifically designed for publication, Publisher 2016 might be the right program for you. We'll begin with a tour of the new and improved user interface to get you comfortable in your environment, then it's onto the basics of creating publications from scratch. You can create your own graphical objects or insert existing objects like shapes, pictures, text boxes and WordArt, we'll also get into more complex functionality when we start customizing the layout and design of our publication, this will involve the use of master pages, backgrounds, templates and building blocks.
I am using Corel draw since last 6 six years . It's a fantastic software to create graphics , visiting cards, pamphlets and leaflets. Shape tool is my favourite tool in Corel draw. There are many other tools which saves my lots of time. Transformation, clipping, convert to curves etc etc. There are endless things to share about Corel draw beauty. In short it is best software to new beginner in the field of graphic designing.
You can also insert a page number inside existing artistic or paragraph text. If the text is located on a local layer, the page number is inserted on the current page only. If the text is located on a master layer, the page number becomes part of the master layer and appears on all pages where the master layer is visible. For more information about artistic and paragraph text, see Adding and manipulating text.
Choose the XVL Studio 3D CAD add-on option to get animation tools and work with 3D CAD Engineering files. XVL Studio 3D CAD Corel Edition adds native 3D CAD file format support to ensure support for assemblies and parts from 3D CAD systems, including CATIA, Inventor, PTC Creo, SolidWorks, NX as well as 3D CAD exchange file formats incl. STEP, JT, and others.
Sorry to hear it, but many thanks for the confirmation. It will save me time looking for easier solutions. I'll manually solve the problem this time, waiting until right before printing before I # the notes across docs manually, and think of a script if I continue to use InDesign after. Still, I'm stunned that the coders have built in automatic page numbering, and yet not this. Not much different for footnotes, as you suggest (check the final # of footnotes, increment by 1 and that is the # of the first footnote in the next doc), and as someone else mentioned.
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.
If you start to type in what appears to be a numbered list, Word formats your manually typed "numbers" to an automatic numbered list. The main benefit of this option is that you do not need to click any button to start numbering and you can choose your numbering style as well. For example, if you type "(a) some text" and press Enter, it starts numbering using the "(a)" format.
Cut and copy work in a similar way. Highlighting a piece of text, right-clicking and selecting copy/cut will store the text in memory [memory: used to store data ]. The difference is copy leaves the highlighted text behind where as cut removes it. To insert the copied/cut text into a different area of the document, a different document, or an entirely different application altogether, right-click and select paste.
I work in Microsoft Word a lot, and it just loves to try to help you out. While a lot of its help can be a hindrance, the underlining of possibly misspelled words, repeated words, and the like can be pretty handy. If you’d like to see this in InDesign, check Enable Dynamic Spelling in the Spelling panel of the Preferences dialog. (You can quickly toggle this from the Edit > Spelling menu as well.)
When you launch CorelDRAW, you are now logged into the Corel server using the account you have set up. As a result, only one version of CorelDRAW X6 (a licensed copy) can be running on one computer at one time. For example, if I have the program running on one computer and then I decide to run the same licensed version of CorelDRAW from another computer, I am now forced to log out of the software on the first computer before I can start CorelDRAW on the other computer. (I can shut down CorelDRAW or shut that computer down.)
However, one other thing that you can be assured of is that there is very little fanfare with the release of a new “service pack,” which has updates, fixes and/or enhancements for existing software. In fact, you might not even know the service pack exists unless your software notifies you. The same can be said for CorelDRAW. At the time of this writing, CorelDRAW had released four service packs since the initial release of version X6 in 2012.
You may know that Adobe uses voting on the InDesign Uservoice site to help determine which new features to add, and one of the top vote-getters has long been “Please make it possible to insert footnotes in tables.” Well, hallelujah: You can now include footnotes within tables. Plus, you can convert footnotes to endnotes and endnotes to footnotes in your document. And, also in the category of long document feature improvements, Adobe made a few small tweaks to the Index panel.
Make the most of your content and important data by repurposing it from existing sources, including 3D designs with the integrated XVL Studio Corel Edition, and the optional XVL Studio 3D CAD Corel Edition add-on for advanced 3D CAD assembly formats. You’ll benefit from full support for a variety of content exchange types including .DWG CAD files, and over 100 other data file formats, and the ability to instantly access content through Corel® CONNECT™.
This issue is bigger than Ben Hur and yet so few people know about it. As Leo has stated, printer and fonts can change the look when the document is opened on another computer. Problems due to printer characteristics are fairly easily fixed by setting the page setup on the target computer to be the same as that on the source computer. Fonts… well just stick to the common fonts on the source computer for maximal compatibility.
Microsoft’s own Publisher program is a step down from those applications in both power and price, but not every version of Office includes Publisher, and it costs $140 to purchase separately. However, chances are good that you already own a copy of Microsoft Word, and that software has a host of desktop publishing tools that you can use to produce pages that rival the output of the best layout artist.
When you embed a series of images on a page, they typically look best when you align each image's left or right edge along the respective edge of the page. If you place them across the width of a document, they usually look best when their top or bottom edges are aligned. To align a series of images to the left or right down the page margin, click on the first image and then hold down the Shift key while clicking on each additional image until you’ve selected all of them. Next, click the Picture Tools tab on the Ribbon and click Format > Align > Align To Margin. Now click Format > Align > Align Left to align the images down the left margin, or Align Right to line them up down the right margin.
Another possible solution if this is a document that has to be read by several or many people is to consider (remember we are talking about a 300 page document) creating a eBook format. Then the reader has some control over the format, or they can leave it alone. With a document this large, I would often load it onto a laptop, eReader, even a phone as the possibility of me being able to find the time to read it at one sitting without interruptions are very slim. This is not effective for all situations but I have found that when I am doing an intensive white paper, which might run into this many pages, the audience likes the ability to move it around to various device as they are reading. You can read PDF in a eReader, but by establishing it in LIT or ePub format then can comfortably read it on a phone, tablet, eReader, or laptop, as well as the main computer. Free programs like calibre will do the conversions for you, as well as be available to read it. On my android phone and tablet I use Aldiko which reads ePub, also free, and as an added bonus you can use the Calibre as a content server to download to you phone or tablet.
As a final note, I also use this feature for my bibliography, which has about 230 references right now. (Thank goodness they finally added the capability to put text before the automatic number. InDesign CS2 is incapable of rendering an automatic list of bracketed numbers.) Anyway, the cross-referencing works great, but I run into the same problem that Dolati mentioned about having to manually change “Fig 2-3 and Fig 2-4” to “Figs 2-3 and 2-4.” Changing the linked text does cause problems when you update the cross references. So, I set up a character style (invisible) that changes the text to white and changes the tracking so that the text doesn’t take up any horizontal space. That way, when I have a set of references like , I type [5-7,12] next to the references and apply the invisible character style to the linked references. Then, I don’t have to worry about the linked text giving me a warning that it needs to be updated. Also if the reference numbers change, I can (1) change the invisible character style so that I can see the text, (2) update the typed reference, and (3) put the invisible character style back how it was. This solution is far from ideal, but it works.
Add context to your technical projects by using 3D views and models in your technical illustrations. With XVL Studio Corel Edition, integrated with CorelDRAW Technical Suite 2018, you can create high-quality renderings from 3D views that are imported from DWG, 3DS, or IGES 3D model files. You can easily transform these 3D views into vector illustrations by using the enhanced “Send to Corel DESIGNER” feature.
When you add a new figure, and figure caption, make sure you anchor the text from the caption box (using blue anchor box on text frames) (if its not inline with the text frame…) and it will update the figure number…. unless you anchor it, it will just become the last number in the document. You will need to do this with all figures. Just anchor them and they will flow and update when needed! Hope this helps!
To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.