Ok, I am no lawyer and do not want to be one. So pardon me if I miss a translation of a point with the TOS or EULA. I am not going to get into this in detail. If you are really concerned, then I suggest you type Terms of Service or EULA and CorelDRAW into Google. There are enough discussions on the web that relate to this topic to keep you going and to breed fire and brimstone in a few of you.
None of the provided options in the Bullets & Numbering / Numbers drop down list seem to do it. In the “Insert Number Placeholder” there is only a “Chapter Number” option in there. Is there a trick to make the “section prefix” show up somehow – it’s too logical for it not to be there – it must be hiding somewhere! Maybe you did that you reveal and I missed it!
As a magazine design, the process is similar but with a few differences. The first step, as always, is to define the format of the magazine. Suppose the finished magazine should measure 19x27 cm then double-click on the page border (this takes us to: Tools > Options > Workspace > Document > Page Size), and choose the size of two pages together: 38x27 cm (the bleed as always, should be 3mm but can be more if preferred).
Create your illustrations and diagrams in accurate scale with the drawing scale control. View the active drawing scale, switch to another preset or set a custom scale at any time. In addition, Corel DESIGNER maintains the drawing scale when importing a vector illustration from a 3D model view so that imported views can be placed at a precise scale.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
Defined lists are often used to track paragraphs for numbering purposes. When you create a paragraph style for numbering, you can assign the style to a defined list, and paragraphs are numbered in that style according to where they appear in the defined list. The first paragraph to appear is given number 1 (“Table 1”), for example, and the next paragraph is given number 2 (“Table 2”), even if it appears several pages later. Because both paragraphs belong to the same defined list, they can be numbered consecutively no matter how far apart they are in the document or book.
With Word Online, you can apply a choice of three bullet styles or five numbering styles. Click the Increase Indent and Decrease Indent buttons to change the list level for existing bulleted and numbered lists in the document, as well as those created in the Word desktop app. Learn more about differences between using a document in the browser and in Word.
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.
In 2012 the joint LibreOffice/re-lab team implemented libcdr, a library for reading CDR files from version 7 to X3 and CMX files. The library has extensive support for shapes and their properties, including support for color management and spot colors, and has a basic support for text. The library provides a built-in converter to SVG, and a converter to OpenDocument is provided by writerperfect package. The libcdr library is used in LibreOffice starting from version 3.6, and thanks to public API it can be freely used by other applications.
The Publications by Design has the templates grouped by design (e.g., Kidstuff, nature, etc.), and you have to scroll down to find the format you need (e.g., Newsletter, Web site, etc.).� This is the way to go if you have already decided on a particular design that you want to use across the board�for all of the types of documents you create.� All printed material (and even your Web site) will
When you add a new figure, and figure caption, make sure you anchor the text from the caption box to text inside your document (using blue anchor box on text frames) (if its not allready inline with the text frame…) and it will update the figure number…. unless you anchor it, it will just become the last number in the document. You will need to do this with all figures. Just anchor them and they will flow and update when needed! Hope this helps!
If you're using Word Online, you can add page breaks but not section breaks. If you have the Word desktop application, use the Open in Word command to open the document. When you’re done and you save the document, it will continue to be stored where you opened it in Word Online. If you don’t have Word, you can try or buy it in the latest version of Office now.
- [Voiceover] When laying out artwork, it's easy to make sure that objects are properly aligned with other objects. In CorelDRAW, it can be done in a number of different ways. From the View menu, you'll see that I have the ability to select Grids, Rulers, Guidelines, as well as alignment guides. These are some of the tools that make it easy to align objects within the document. There's also the ability to do snapping. And of course I can snap to the document grid, baseline grid, guidelines, as well as objects and the page itself. Under the Tools menu, Options, then Document, here we have the ability to set up the frequency of guidelines, grids, rulers, and that sort of thing. I'm going to talk a little bit more about this in a few minutes. For now, let me just cancel this, and we're gonna take a look at the rulers. You'll notice that we have two rulers. One is a horizontal ruler across the top and we have a vertical ruler down the left-hand side. You may notice that our zero zero coordinate is bottom left-hand corner. If for some reason we wish to change that, it's easy enough simply by left-clicking where the rulers intersect, and I'm gonna drag and drop this to the top, left-hand corner of my page. That's effectively reset the zero zero coordinates to the top left corner. Now if I want to draw with better accuracy, I can actually left-click where the rulers intersect, hold the Shift key down, and drag the rulers right out onto the page. Makes it a lot easier to get down and get into the fine details when you're drawing on the document. I'm gonna hold the Shift key down, left-click and drag the rulers back to where they belong. Now the next way to assist in lining objects up is by using the grid. Underneath my View menu, I'll go down to Grid and I'm gonna select Document Grid. Here you can see our document grid is set up as a dot pattern. This is easy enough to change. From the Tools menu, go down to Options, highlight Grid, and here we can show the grid either as dots or as lines. I also have the ability to change the frequency of the grid. I'm going to change this to .5 And you'll see I have Snap-To is turned on. I'll click OK to this, and now set up the grid at .5 and now you can see if I draw a rectangle, I'm going to left-click and drag and I can move this rectangle around and you can see it's going to snap to the gridlines for me. Now the next way to assist in lining things up is to use Guidelines. But first, before I do that, let me go to the View menu down to Grid, and I'm going to turn off the document grid. Guidelines are created by dragging in from the rulers. So I can drag in from my horizontal ruler, left-click, and I'm going to drag down and I'll position a guideline here. I'll left-click my vertical ruler and I can position another guideline here. So it's very easy to bring guidelines out on the page, and I'll just say it's simply a matter of clicking on the ruler and dragging down onto the screen itself. You'll notice that these guidelines are blue while this one is red. The reason that is, is because this is a guideline that's currently selected. Let me just select my Pick tool and when I click on this guideline, you can see it's turned red. It's very easy to change the color of guidelines and one reason why you might want to do that is if you had multiple layers and you want guidelines on these multiple layers you can have separate colors for different layers. I'm gonna left-click on this green and I'm gonna drag and drop that on top of this guideline and that's gonna change that guideline green. Again, one that's currently selected and if I select this one, it will turn red. But if I deselect it or select a different guideline, then of course it goes back to the green. Now another way to add guidelines is to use the guideline docker. And there is a couple of different ways to get there. I can click on this little icon here to go to my guidelines. I can go to Windows, down to Dockers and select Guidelines, or quicker and easier, simply double-click on a guideline and that's going to open up the docker for me. In here I have the ability to very precisely position guidelines where I want them. Now the final way to align objects on the page is to use Alignment Guides. Let me go to the Windows menu, down to Dockers, then I'm going to select Alignment and Dynamic Guidelines. In here I want to turn on my alignment guides so it's simply a matter of clicking on this little icon. Now I've gone ahead and I've changed the color of this so that my alignment guides are now a darker brown. It's a lot easier for me to see. If for some reason you want to change the color, it's simply a matter of hitting the drop-down and I can select whatever color I want in here. By default, it's a light blue. So let's leave that as it is, and now when I create a rectangle, you'll notice that as I move around my page I have these alignment guides which allow me to very precisely position the next object that I'm creating. Again, left-click and drag, and again, very easy to align objects on the page. So with a little bit of set up, you can see how easy it is to have increased accuracy while creating your design.
Cons: The basic disadvantage that I find is the same as it applies to any graphic software of vector character: you must have a computer equipped with a powerful and powerful processor that allows you to perform all the calculations necessary to design with this software, a task that becomes a lot slower to the extent that the number of data rises, as more elaborate designs are desired.
Guess what happened? It’s likely you accidentally hit a keyboard shortcut that toggles off this preference. Check Use Typographer’s Quotes again, then lock it down by changing the keyboard shortcut. (Do you really need to toggle this off? If you need foot and inch marks, just use those keyboard shortcuts: Command+’/Command+Shift+” or Ctrl+’/Ctrl+Shift+”.)
Add all of the elements that are repeated throughout most of your document: guides, page numbers, a running text box, image frames, graphic elements, etc. You can have more than one set of master pages in a document, which is particularly useful for brochures, whose content often varies (for example, with a mostly textual introduction followed by image-heavy pages).
CorelDraw full-suite comes with graphic design, page layout, photo editing and vector editing tools. Another plus point is the subscription plan is low compared to other products. We can simply run CorelDraw in low-budget devices. Because couple of years ago,i have used duel-core computer with only 1GB RAM. Also they provide good customer help and support to us. Really appreciate their service.
It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
Word Online displays documents that are protected with Information Rights Management (IRM). However, these documents cannot be edited in the browser, and you cannot create IRM-protected documents in Word Online. Word Online can't open documents that are encrypted with a password. Advanced document protection features, such as creating IRM-protected documents and applying password-protection, are only available in the Word desktop app.
I’m new to InDesign, and thought I had sorted out figure numbering but am having trouble with the way that figures are numbered in my document. I set it up as described in this post, but some of my figures are in line and the captions are just another line of text in the body of the story, while others are full page graphics with text box captions that are not linked to the body of the document. Currently, the figure numbers run sequentially through the figures that are in line in the document, and then continue with the full page graphics. The problem is that the full page graphics come before any of the in line graphics, so they are out of order. Is there any way to correct this?
When you click More Options in the Generate Index dialog box, formatting options appear that let you determine the style and appearance of the generated index. InDesign includes a number of built‑in paragraph and character styles that you can select to format the generated index, or you can create and select your own styles. After you generate the index, you can edit these styles in the Paragraph Styles and Character Styles panels.