A request for numbering headings in a new document doesn't have to elicit terror—it only sounds ghoulish. If you're good with styles, you might consider a custom numbered list style, but that's too much work. Instead, use Word's built-in heading styles for a painless process. My best advice is to get the numbering scheme in place before you create the document. Trying to number headings in an existing document really can cause nightmares!
   However, one other thing that you can be assured of is that there is very little fanfare with the release of a new “service pack,” which has updates, fixes and/or enhancements for existing software. In fact, you might not even know the service pack exists unless your software notifies you. The same can be said for CorelDRAW. At the time of this writing, CorelDRAW had released four service packs since the initial release of version X6 in 2012. 

For the calendar job, I've used two master layers and four local layers. To create a master layer, click the New Master Layer (all pages) button at the bottom of the Object Manager docker. Objects placed on this master layer will appear on all pages of your design. Then, create the required number of regular or local layers (in this case, four) by clicking the New Layer button. You now have one page ready.
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.

© Corel Corporation. All rights reserved. The content herein is in the form of a personal web log ("Blog") or forum posting. As such, the views expressed in this site are those of the participants and do not necessarily reflect the views of Corel Corporation, or its affiliates and their respective officers, directors, employees and agents. Terms of Use / Privacy​ ​/ ​Cookies / Terms and Conditions / User Guidelines.
Use "Format Page Numbers" for specific changes, like types of numbers and chapter headings. If you want to go the extra mile, double-click on the header or footer once again. Click "Page Numbers," then click "Format Page Numbers" under the menu that appears. From here, you can set different types of numbers, like Roman numerals or letters, as well as customize the basic appearance of numbers. It is not incredibly robust, but it works.
Keyboard shortcuts for kerning and tracking are awesome for quickly experimenting with type and for copyfitting. But InDesign’s default increment of 20/1000 ths of an em is HUGE. I knocked it down to 5 in the Kerning/Tracking field (Preferences > Units & Increments > Keyboard Increments). Maybe you love it—leave it alone. Maybe you think it’s too small—bump it up. The point is, you can make this setting work for you.
Overall: Ever since i started using coreldraw i have helped so many companies advertise their products through graphic design, i have also help many organizations to spread information in a form of banner/flyers as well as wedding invitations and many other helpful things, i use the knowledge i have with coreldraw as a source of income for myself because i get paid pretty good when ever i create a banner or any graphic design content for a client.
The PSD image format deserves special mention. Being able to import PSD files into InDesign is extremely useful when working with elaborate graphics that have transparent or semi-transparent elements, especially if they are to be placed over colored backgrounds or textures. Another useful feature is the ability to turn the layers in a PSD file on and off directly in InDesign (i.e. without having to open Photoshop).

If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:


      Ok, I am no lawyer and do not want to be one. So pardon me if I miss a translation of a point with the TOS or EULA. I am not going to get into this in detail. If you are really concerned, then I suggest you type Terms of Service or EULA and CorelDRAW into Google. There are enough discussions on the web that relate to this topic to keep you going and to breed fire and brimstone in a few of you.


Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
On measurements… I’ve made a fortune fixing all the poorly crafted jobs of people who don’t use picas and points. When you size type you use points – I can honestly say I RARELY run across situations where type in a file is sized in inches or metrically. It makes more sense to use one system of measurement of an entire document. Points are a sub unit of picas and beyond that you can be much more precise – 72 points in an inch (not even getting into half or quarter points) can you tell me what 1/72 of an inch is in a decimal value off the top of your head? Likely not. Then again I keep seeing layouts where the width of a text box is along the lines of 4.5839″ by 6.2991″ – you keep doing your sloppy work and I’ll keep making money. And when you can’t figure out why things look slightly off in your design in terms of spacing of elements or alignments, tell me once again how picas and points are so very arcane.
To make the best use of the first few pages of a newsletter, you should start a long story on one page and finish it on a later page. That way, you can fit more stories on the front page, which is what your readers will see first. You can accomplish this by placing the story in linked text boxes, so that when the first text box is full, excess text will automatically flow into the second text box.
Publications by Wizard provides you with templates you can modify to suit your needs. You have several formatting choices including: Newsletter, Web Sites, Announcement, Invitations, and more. These format choices are located in the left frame of the Catalog window under the title Wizard.� Within each of these formats, you will find many styles, or designs, from which to choose.
On measurements… I’ve made a fortune fixing all the poorly crafted jobs of people who don’t use picas and points. When you size type you use points – I can honestly say I RARELY run across situations where type in a file is sized in inches or metrically. It makes more sense to use one system of measurement of an entire document. Points are a sub unit of picas and beyond that you can be much more precise – 72 points in an inch (not even getting into half or quarter points) can you tell me what 1/72 of an inch is in a decimal value off the top of your head? Likely not. Then again I keep seeing layouts where the width of a text box is along the lines of 4.5839″ by 6.2991″ – you keep doing your sloppy work and I’ll keep making money. And when you can’t figure out why things look slightly off in your design in terms of spacing of elements or alignments, tell me once again how picas and points are so very arcane.
      When you install the update or service pack, you are prompted to log in or create an account. Figure 1 shows the log in screen that you are presented with when you install CorelDRAW or a new update. You do not have to create an account but if you don’t, you will not receive updates to your software. For this reason, you really do need to create an account. To create an account, click on the blue “Create an Account” button.
Like the Control panel, the Properties panel changes based on what’s selected. The mode you’re working in (for example, Text Insertion or Linked File) appears listed at the top of the Properties panel. The rest of the panel is grouped into sections. For example, if you are editing text, the panel configures itself to show sections for Text Style, Appearance, Character, Paragraph, Bullets and Numbering, and Quick Actions (Figure 1).
If you want to use a bullet found in a specific font (such as the pointing hand from Dingbats), be sure to set the bullet to remember that font. If you use a basic bullet character, it’s probably best not to remember the font, because most fonts have their own version of that bullet character. Depending on whether you select the Remember Font With Bullet option, a bullet you add can reference either a Unicode value and a specific font family and style, or just a Unicode value.
Active X controls, embedded OLR objects, and a signature line will display in the document as expected in View mode. In Edit mode, they appear as placeholders that you can delete but not edit. They cannot be moved or resized in Word Online. Advanced controls and macros are only available in the Word desktop app. Learn more about differences between using a document in the browser and in Word.

Pros: I know that everyone else in the world uses the Adobe suite of programs from graphic design, but I've been using CorelDraw for years and find it infinitely preferable. The layout of the program and the way various tools work I find to be much more straight forward and intuitive. What I can do in InDesign or Illustrator I can usually do in half the time, in Corel Draw.


      As mentioned, you must have an account to get any updates now with version X6, which is different from earlier versions of CorelDRAW. In older versions, updating CorelDRAW with a service pack involved going to the Corel website and downloading the service pack. In more recent versions, the update could be done automatically via the Update command in the Help menu in the software. With Version 6.1, updates can only be done after you create an account with Corel and then log into the account via CorelDRAW.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
20 Mar 2012[26]	X6 (16)	7 to X6	7 to X6	XP (32-bit only), Vista, 7, 8	Includes 64-bit and multi-core processor native support, support for 64-bit Adobe Photoshop plugins, and additional tools to import and export from Adobe Creative Suite and Publisher. Object properties, styles, and color styling have each been consolidated into their own docking toolbars. A new Unicode OpenType-based text engine modernizes text handling, including full international language support (the legacy text mode is retained). Dynamic alignment guides allow for easy repositioning without setting static guidelines. CorelConnect content organizer allows for in-application access to online sources such as Flickr for assets such as images and clip art. New tools permit manipulating vector images by pushing, pulling, smearing, etc. Various improvements in frame-based layout, masking, clipping and effects have been made.[27]

Pros: CorelDRAW is mostly used software in world of graphics designing in computer and printing press industry. It is the largest world using software that support approximately all languages including unicode languages. It has a lot of tool sets built in the software to design beautiful graphics. It is also using in the newspapers, magazines and books publishing markets. In Pakistan everyone who want become a designer it should have great skills on CorelDRAW. Now these days there are many free and open source softwares available for designing but CorelDRAW is beating all of them.
Use the callout drawing tool in Corel DESIGNER to add interactive functionality to callout shapes in technical publications. With the Object Data Manager docker, you can list metadata fields, such as WebCGM metadata, for any graphical or callout shape. Object data items can be edited so that shapes can be manually edited as hotspots for WebCGM output.
Word and Publisher were designed to provide specific solutions for different requests. If your document requires footnotes, endnotes, annotations, tables of contents or page numbers, use Word to create the document. Publisher's ability to position text and graphics, handle pantone images and merge text and images makes it ideal for brochures and other creative documents. You will save time and effort if you choose the correct application for your tasks.
      Ok, I am no lawyer and do not want to be one. So pardon me if I miss a translation of a point with the TOS or EULA. I am not going to get into this in detail. If you are really concerned, then I suggest you type Terms of Service or EULA and CorelDRAW into Google. There are enough discussions on the web that relate to this topic to keep you going and to breed fire and brimstone in a few of you.
   When you launch CorelDRAW, you are now logged into the Corel server using the account you have set up. As a result, only one version of CorelDRAW X6 (a licensed copy) can be running on one computer at one time. For example, if I have the program running on one computer and then I decide to run the same licensed version of CorelDRAW from another computer, I am now forced to log out of the software on the first computer before I can start CorelDRAW on the other computer. (I can shut down CorelDRAW or shut that computer down.)
Versions for Mac OS and Mac OS X were at one time available, but due to poor sales these were discontinued. The last port for Linux was version 9 (released in 2000, it did not run natively; instead, it used a modified version of Wine to run) and the last version for OS X was version 11 (released in 2001). Also, up until version 5, CorelDraw was developed for Windows 3.1x, CTOS and OS/2.
Use the callout drawing tool in Corel DESIGNER to add interactive functionality to callout shapes in technical publications. With the Object Data Manager docker, you can list metadata fields, such as WebCGM metadata, for any graphical or callout shape. Object data items can be edited so that shapes can be manually edited as hotspots for WebCGM output.
Microsoft Publisher is an application that turns your computer into a desktop publishing center--allowing you and your students to create a number of professional looking documents. With Publisher, you can create a class newsletter, a flier for an upcoming fundraiser, invitations for a class function, or informational brochures on any number of topics.

      There is nothing more igniting to create a firestorm of debate than those issues that surround a TOS or EULA. If I only had a dollar for every time I listened to a podcast or read an article that related to the constant debate on this TOS and that TOS. I can tell you that people just hate it when a company or government even comes close to taking away or even treading close to their rights.
Choose the figure number paragraph style in the list on the left, and the specific figure you’re pointing at in the list on the right. Then set the Format to Paragraph Number — after all, there’s no text in the paragraph; you just want its “number.” Don’t forget to set Appearance to Invisible so that you don’t have incredibly ugly black rectangles all over your document.
Originally, I had an other problem as well. The first no on a level 2-numbering refered to the section and not to the chapter. I had a book with 2 parts and 3-5 chapters in each part. The numbering then all started on 1 in book-part 1 and all on two in book-part 2, (i.e. figures in book-part 2 chapter 4 all numbered 2.1). I got around that by creating 8 dokuments/book parts for my 8 chapters, but if someone knows how to fix this properly Í’m eager to hear about it!
Leo, thanks for being available. I have a new hp and have a problem on WORD keeping a newsletter together. It is only one page; however, I have used a half dozen color photos. I have done letters like this for years, so I can’t understand it, except that I am now 89 years of age. Why does my letter come apart when I try to send it via email? Thanks for helping! Ricardo
Pros: Oh my, I have been using this program since 1997! Wow, I'm old! But the program has aged far better than I have, certainly. What's really remarkable is that despite all the years, the GUI is still intuitive and well laid out. It's also easier to 'ramp up from zero' (at least I think so, I'm sure I'm biased somehow having used it for so long) and get busy on real work.

You now have three options for the size of preview text. Plus, the preview text can be the text you have selected on the page, or you can select between five preset text phrases. By the way, if you hate these kinds of font previews (some people do!), you can turn off the Enable In-menu Font Previews option in the Type pane of the Preferences dialog box.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files. desktop numbering using publisher
×