Anyway, there's a good alternative: create a PDF. To do this, you can go to File > Publish to PDF (or go to File > Export (CTRL+I), and there choose PDF). But it is not enough just to create a PDF, since not all the PDF's have the same configuration. For example, a PDF for the web will produce a PDF of low quality but it will be a small file, suitable for attaching to an email or using on a web page. But for printing, we need the opposite: images of high quality and resolution. PDF settings is also a topic that requires a lengthy explanation, but this excedes the scope of the current tutorial. There are many different configurations, according to each company's work flow. But we propose a simple format that should work with most of the job outputs: choose PDF X-3 in the PDF Presets drop-down list, then go to "Settings" and change the "Compatibility" to Acrobat 8.0 or higher. Why? Because the PDF X-3 is a good standard but it has a default compatibility with Acrobat 4.0, which does not support transparencies and lenses. This problem is solved by changing the compatibility.
Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
Place the insertion point in the paragraph and choose Restart Numbering from the context menu or choose Type > Bulleted And Numbered Lists > Restart Numbering. In normal lists, this command assigns the number 1 (or letter A) to a paragraph and makes it the first paragraph in a list. In multi-level lists, this command assigns the first lower-level number to a nested paragraph.
So, to create multi-level headings, you need to use the Level option just to the right of the List drop-down box. My second- and third-level headings use the same list as the first-level headings (this is necessary), except that they are changed to Level 2 and 3, respectively. Then, when numbering the section heading, you can insert the number of the previous-level heading above it. These can be selected using the arrow to the right of the Number field and selecting one of the levels under “Insert Number Placeholder.” So, the text in the Number field for my second-level heading is ^1.^#^t and it is ^1.^2.^#^t for the third-level heading. This presents the multi-level heading with dots between the numbers and a tab between the numbers and the section heading.
Unlike other desktop publishing programs, Microsoft Publisher isn't designed to stand alone. It's available as part of certain versions of Microsoft Office, and consequently pairs well with the rest of the Office suite. For example, it natively imports Microsoft Word .doc and .docx files, parsing them perfectly and integrating them into complex layouts with ease. Likewise, if you need a table or graph from Excel in your next newsletter, you can pull it in without hassle.
Footnote numbering is not continued across documents in a book. This is an expected behavior and not a bug. Please see the section Footnote numbering and formatting options in this URL: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6f37a.h tml. Please see attached screen: However, if you have threaded text frames across your book documents, then Footnote numbering will continue.

Produce illustrations that contain descriptive text, then output directly to the Translation Memory System (TMS), and process in Corel DESIGNER for translated results to use in multi-lingual global technical publication. Now, you can format text spanning multiple columns and use Corel DESIGNER to author complete user manuals or documents. Next, send the source language text for translation and receive translations to create localized documents literally with one click.


As it's one of the many programs that come with Microsoft Office, there is a good chance you already have Publisher on your computer. It's been included with higher-end copies of Office for almost 20 years, offered as a lightweight alternative to professional layout software such as Adobe InDesign. Though it's rarely used in a professional capacity, Publisher remains a surprisingly capable desktop publishing application. It sports excellent typography tools and one of the best template selections we've ever seen. It comes up somewhat short in the area of graphics editing support, but given its strengths, especially its usefulness in creating long-form publications, Microsoft Publisher remains a great option for at-home users, earning our Top Ten Reviews Bronze Award.
Waleed is a native Arabic speaker born in Menofeya (the northern part of the Nile Delta), Egypt. He is Adobe Certified Expert. He has over 13 years’ experience in multilingual design, desktop publishing and localization engineering. Over the years he has worked for localization and design companies verso and Future-Group working in the documentation desktop publishing and design departments. He also has comprehensive training and experience in many localization and CAT tools. He holds an array of professional certifications including, Adobe's ACE (Adobe Certified Expert), Adobe's Digital Imaging certification, CIW’s Certified Internet Webmaster and Programmer, IBM Web Programmer and Macromedia Designer and extensive application experience with the Adobe Creative Suite and Microsoft products. He is a graduate from Menoufia University with a B.A in English Language and Literature. His hobbies include gardening, swimming and traveling.
Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
Word is not designed for handling large document collaboration, which includes sending clients reports. As Leo has suggested, create the PDF of your report and send that your client. If they want changes, have them communicate them back and you make the necessary changes and then PDF the revised report again. It’s the only way that you can be absolutely certain that your client sees what you intended.
Provides me every feature I need to create impressive ,quality drawings. It has particularly been useful when I need to create logos or any other vector based drawings. I leverage on Corels SHAPE TOOL to correct any errors and shortcomings in my drawings using nodes. I also like Corels text tool for their typographic quality , allowing me play around with texts..
When working with large files in CorelDRAW, it may be required to increase the amount of memory allocated to the application. Default memory allocation is set to 25%. This can be increased to as high as 50%, though it is not recommended to exceed this level. Increasing this setting beyond 50% will reduce the amount of RAM being used by Windows, decreasing performance of the entire computer. It may also be required to change drives being used as swap disks. Drives with a high capacity of free space are ideally suited for swap disks. It is also recommended that the primary disk be set to a drive which does not contain the Windows partition. This will improve read and write times if specifying a drive with little or no disk activity.
   If you are a shop that relies on one version of CorelDRAW and it is installed on multiple computers, you may be in for a surprise and added expense if you update to a service pack 6.1 or higher, or if you decide that when a new version of CorelDRAW comes out, you want to upgrade and install one license on a number of computers. For example, if you usually have four people working at the same time on their own computers, then each version on each computer will require its own license. I know that a lot of shops have the same version of CorelDRAW on multiple computers. So, when upgrade time comes you could be in for a significantly higher cost.
The problem we are having is that 2 computers in our house are viewing special characters differently. For my job we use the plus minus sign a lot. One one computer it works fine, the other computer it appears like an upside down A. They both have word 2003, they both have windows XP and they both use the same printer. So, what is causing this and is there a way to rectify the problem?
To create a running list—a list that is interrupted by other paragraphs or that spans multiple stories or documents—create a paragraph style and apply the style to paragraphs that you want to be part of the list. For example, to create a running list of the tables in your document, create a paragraph style called Tables, make a defined list part of the style, and then apply the Tables paragraph style to all paragraphs you want in your Table list.
Adobe has changed the name of Typekit to Adobe Fonts. However, it still appears as Typekit in some programs, such as Photoshop, which will undoubtedly cause some confusion for a while. But the confusion goes deeper than just branding. After all, the font called Adobe Garamond is an “Adobe font,” because it was designed and developed by Adobe. But hundreds of other fonts were designed and developed by other non-Adobe font foundries, and only licensed to be distributed through Typekit. Unfortunately, those are now also called “Adobe Fonts.” So when you’re talking with someone about “Adobe Fonts,” you need to be clear whether you’re referring to the fonts from Adobe or “the service formerly known as Typekit.”

Sending a Word (or any format document) doesn’t convert anything when it is send as an attachment. The most common culprit, from my experience, is when the document uses fonts which the receiver(s) don’t have on their computer. In that case a different similar font is used. Using only fonts which come preinstalled on all Windows versions will solve many (but not all) of the incompatibility problems. Unfortunately, this won’t work on a different OS such as MacOS or Linux. The best solution is to convert the document to .pdf and it should work on all machines.
I then trawled through various forums and Parallels Desktop was being highly praised, so I purchased it right away from the Apple retailer Gravis. The software was installed quickly and without any difficulty and I’ve been using CorelDRAW on my Mac ever since with excellent performance. It runs quickly and smoothly and I find the seamless integration of Windows and Windows programs in the Mac OS interface with the Coherence view mode to be top notch.”
It's not good if the file is opened in a different version of the program because some things can change. For example, the fills of CorelDRAW X7 are quite different to those of previous versions and also allow selective transparency. For this reason, if you save the file back as a previous version, the program will ask if you want to convert text to curves and fills to bitmaps.
Create isometric or other parallel projected technical illustrations for assembly and maintenance instructions by dynamically drawing on a projected plane. Project your existing planar objects to a desired plane instead of manually calculating the skew angle and rotation. Obtain more precision and exactness with the UI controls in Corel DESIGNER®, as users can draw and edit shapes using accurate measurements in isometric and other projected drawing modes.

Theory is great, and articles like this one can give you quick useful tips, but the best way to learn is by practice. If you are new to InDesign, try this: use an existing layout as a guide (anything you want: a page from a magazine, a poster or a business card), and try to recreate it from scratch. Familiarize yourself with the tools, menus and options. If you get stuck, you can always search for tips and tutorials or ask a friend.

Track essential design details and key information with dynamic callout tools. Sticky callouts will connect or "stick" to source objects as they are moved around or modified. You can also link callout text to source shape metadata. Callouts based on object metadata are dynamic, helping you efficiently and consistently implement updates and changes.
LibreOffice has supported Publisher's proprietary file format (.pub) since February 2013.[4] Corel Draw X4 features read-only support. Adobe PageMaker also saves files with a .pub extension, but the two files are incompatible and unrelated. Publisher supports numerous other file formats, including the Enhanced Metafile (EMF) format, which is supported on Windows platforms. The Microsoft Publisher trial version can be used to view .pub files beyond the trial period.[5]
Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
Running captions number figures, tables, and other items consecutively in a document. For example, the first figure caption starts with the words “Figure 1,” the second with “Figure 2,” and so on. To make sure that figures, tables, or similar items are numbered consecutively, define a list for the item, and then create a paragraph style that includes the list definition. You can also add descriptive words such as “Figure” or “Table” to the numbering scheme of the paragraph style.
×