CorelDRAW, when launched will poll the Windows default printer for information specific to the device. It will seek information pertaining to the printers capabilities, such as color capabilities, printable area, duplexing options and others. If a communication problem exists between the printer and the application, a failure to create a new document, or open an existing file may occur. This is particularly true with laptops removed from the network which use a network printer as the Windows default. Other problems may occur which result in random errors or reduced performance if there is a problem with the default printer. To determine if the printer is at fault, install a generic PostScript printer driver and set it as the Windows default printer (a color Apple LaserWriter will suffice). Once installed, check to see if the problems persist. For information on how to install a printer in Windows 2000 or XP, please consult the Windows help files.

Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
Cons: Among the couple of problems I can state about this program remains in recommendation to the gradients, since when it is printed it does not work effectively, as if it had low levels. The filters for photos, since they do not deal with pictures with lots of information, they do not look extremely natural or lose the majority of the information when used.
Not working on Mac, but had the same issue on my PC (both in v.13 and 14). It disappeared after uninstalling CC Desktop Application after finishing ID installation (with Adobe uninstaller – https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html) I’m not using CC Cloud so it’s not a problem for me, but I guess it will be a problem if somebody actually needs CC Desktop APP.
After adding a few more facts, as shown in Figure F, you might notice something new—the two-digit numbers don't align with the previous one-digit numbers. You could leave the list as is, but most likely you'll want to adjust it. Leaving it as is makes the reader uncomfortable; it's simply not as readable as it should be. We expect numbers to align using the period character or the right-most digit if there's no punctuation.
24 Aug 1995[12] 6 3, 4, 5, 6 5, 6 95 This is the first version which was made exclusively for 32-bit Windows. New features were customizable interface, Polygon, Spiral, Knife and Eraser tools. Corel Memo, Corel Presents, Corel Motion 3D, Corel Depth, Corel Multimedia Manager, Corel Font Master and Corel DREAM (for 3D modelling) were included in the suite.
The easiest way to implement a numbering scheme for headings is to add one to a heading style. To illustrate, we'll modify Heading 1 by adding a numbering scheme. First, right-click Heading 1 in the Styles gallery (in the Styles group on the Home tab). Then, choose Modify as shown in Figure A to launch the Modify Style dialog. If you thumb through the default properties, you'll not find a numbering scheme (Figure B). Click the Format button and choose Numbering as shown in Figure B. If necessary, click the Numbering tab. Choose the predefined scheme that's the best match for what you want (Figure C).
As far as figure or table numbering goes, the numbering needs to be done under the same list but on a different level. I use level 4 for my figures and level 5 for my tables. As an example, the figure style has this in the Number field: Figure^.^1-^#:^>. This renders any figure caption anywhere in the document correctly: Figure 3-7, Figure 5-2, Figure 1-11, depending only upon where in the text the style is applied. The ^. is a punctuation space. It’s slightly less than a regular space and keeps any cross-referenced figure instance from breaking over a line; so I’ll never see text like “…see Figure(line break)2-2 for a diagram of…” Also, the en space (^>) adds a nice distance between the figure number and the text explaining the figure.
   “Each license should only be used by one person. It can be installed up to three times for the convenience of being able to use it on a laptop vs. desktop vs. tablet. The license can only be open and running on one machine at a time. More information is available in our EULA (www.corel.com/eula). In the scenario you described, the company would need to buy four full licenses of CorelDRAW Graphics Suite X7, or if they have one license of X6 or X5, they could purchase one upgrade and three full licenses. We do validate serial numbers from previous versions when installing a purchased upgrade, so it’s not possible to install an upgrade if you do not own one of the two previous versions of CorelDRAW (i.e. you must own X4 or X5 to purchase an upgrade of X6). That being said, we also offer volume licensing prices for anyone buying two or more copies of CorelDRAW.”
Microsoft's Word and Publisher tools are applications, which are sometimes used for similar tasks, including typing and editing text and placing, cropping, resizing and rotating images. Does this mean we have two MS Office tools serving the same purpose? No it doesn't, Word and Publisher were designed to provide solutions for specific types of documents and content. Therefore, you need to select which application is more relevant for your specific desktop publishing (DTP) requirements.
Português: Inserir Números de Página no Word, Español: insertar números de página en Word, Italiano: Inserire i Numeri di Pagina in Word, Русский: добавить номера страниц в Word, Français: insérer des numéros de page dans Word, Deutsch: In Word Seitenzahlen einfügen, العربية: إدراج أرقام الصفحات في برنامج وورد, Bahasa Indonesia: Menambahkan Nomor Halaman di Microsoft Word, Nederlands: Paginanummers invoegen in Microsoft Word
The CorelWORLD Real Life Video Tutorials was produced for the CorelWORLD Conference. The video package features more than 2.5 hours of tutorials on CorelDRAW, including extensive lessons on Corel® PHOTO-PAINT™. Discover how easy a difficult task can be when you apply the correct process, and see why things go wrong when you don't make the right choices. The tutorial package is included for free with the WorkPLACE Ready Training Package.
If you want to use a bullet found in a specific font (such as the pointing hand from Dingbats), be sure to set the bullet to remember that font. If you use a basic bullet character, it’s probably best not to remember the font, because most fonts have their own version of that bullet character. Depending on whether you select the Remember Font With Bullet option, a bullet you add can reference either a Unicode value and a specific font family and style, or just a Unicode value.
CorelDraw is quite expensive to purchase outright. This makes it difficult for an independent user to justify such a large expenditure unless the software is used frequently. For most students, grad students or researchers who lack a big software budget, open-source applications may do the job just as well. But if you need a pro-grade tool that can handle any task, then you'll do well to purchase CorelDraw.

One solution is to format the heading with the style and follow it with a hidden paragraph mark. You should format the text in the next paragraph with a style that is not included in the Table of Contents. A hidden paragraph mark keeps the text together on one line when it is printed, even though it is actually two separate paragraphs. The Table of Contents command picks up only those paragraphs with heading styles and places them into the Table of Contents.
Microsoft has a nice selection of support options, including helpful FAQs and tutorials on its website to forums on Facebook and other websites, you should be able to find answers to any questions you have. While email support is absent from Microsoft’s service, the company offers both telephone and live chat options. Live chat is one of the most convenient support options, providing answers to your questions in real time, and a rarity among desktop publishers.
Excellent stylus support (including the ability to adjust stylus tilt, bearing and rotation in real time). A quick editing workflow. Each node has a distinct appearance depending on the handle or selection type, and the size, colours and shapes of the editing points are customisable via Options. More intuitive interactive sliders for gradients, blends, transparency and so on wrap up a decent release.
Of course, there are several types of jobs: magazines, business cards, brochures, etc. It's almost impossible to talk about all, but most of the settings are common for all jobs. But remember: it's very important to talk to the printing company before you start, because each company has its own rules and requirements. Cost is an important factor in any job, and any change (such as a change in the size or colors used), even minimal, can result in a change to the final price of the job.
Not working on Mac, but had the same issue on my PC (both in v.13 and 14). It disappeared after uninstalling CC Desktop Application after finishing ID installation (with Adobe uninstaller – https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html) I’m not using CC Cloud so it’s not a problem for me, but I guess it will be a problem if somebody actually needs CC Desktop APP.
One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed.

“These are the things I think of when I hear the word ‘typesetting’—they’re memories from my job at Seattle’s free rock and roll newspaper The Rocket, circa 1982. Desktop publishing didn’t exist yet, and digital (as opposed to photo) typesetting systems—with their WYSIWYG displays—were rare. The codes and characters I saw on my screen wouldn’t look anything like type until they were printed, one character at a time, on a strip of photographic film and developed. I could set just about any kind of type using that machine, provided the characters would fit on a piece of film not more than seven inches wide, and provided I didn’t need to use characters from more than six fonts.”

I answer readers' questions about Microsoft Office when I can, but there's no guarantee. When contacting me, be as specific as possible. For example, "Please troubleshoot my workbook and fix what's wrong" probably won't get a response, but "Can you tell me why this formula isn't returning the expected results?" might. Please mention the app and version that you're using. I'm not reimbursed by TechRepublic for my time or expertise, nor do I ask for a fee from readers. You can contact me at susansalesharkins@gmail.com.
When working with large files in CorelDRAW, it may be required to increase the amount of memory allocated to the application. Default memory allocation is set to 25%. This can be increased to as high as 50%, though it is not recommended to exceed this level. Increasing this setting beyond 50% will reduce the amount of RAM being used by Windows, decreasing performance of the entire computer. It may also be required to change drives being used as swap disks. Drives with a high capacity of free space are ideally suited for swap disks. It is also recommended that the primary disk be set to a drive which does not contain the Windows partition. This will improve read and write times if specifying a drive with little or no disk activity.
My problem is similar but it happens when the same printer is used and different pcs. We have several word docs that are the direction inserts for the products we make. They were all created with Word XP and all are formatted to fit to 2 pages. We got 2 new Dell Optiplex pcs last year. No problem. We got 2 new Dell Vostro pcs in April. No problem. We upgraded to Word 2003 in June. There is no problem with the new pcs but on the old pcs, the direction inserts spread to more than 2 pages, a lot more. The pcs are networked and they are all accessing the same files. They all run Windows XP home edition. When you print the insert from the old pc it is evident that the font looks a little bigger. Of course we could change the formatting but then, when printed from the new pcs the text would be too small. It
Publish to 3D PDF with interactive viewing of 3D content in combination with other visual and text elements. Export from Corel DESIGNER to 3D PDF to generate output with all pertinent data and graphics in one document for cross-media publishing. 3D PDF files can be viewed with free PDF reader applications that are installed on almost any desktop or laptop computer.
Footnote numbering is not continued across documents in a book. This is an expected behavior and not a bug. Please see the section Footnote numbering and formatting options in this URL: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6f37a.h tml. Please see attached screen: However, if you have threaded text frames across your book documents, then Footnote numbering will continue.

Leverage all the power you need to publish, share and output important technical documents, including a new capability to publish to WordPress. Using a diverse set of cross-media publishing and distribution capabilities, including CGM, WebCGM, SVG, PDF, and 3D PDF, you will ensure all of your important technical files will be delivered in a readable format and accessible through online, print and mobile options.


More than one person can work simultaneously in a document. In Word Online and Word 2016, real-time presence helps you see where your co-authors are working in the document so that you don't create conflicts as you edit, and you can see changes as they're being made. Word 2013 supports simultaneous editing, but there is no presence indication, and changes can't be seen by multiple authors until the document is saved. To learn more about real-time co-authoring, see What's new in Word Online and Collaborate on Word documents with real-time co-authoring.


Another way to import images and text is to simply drag them onto the document (from Mac’s Finder or Windows Explorer). This will automatically create an image or text frame, import the content and create a link to that file. If you drag content on top of an existing frame, it will replace the existing content but leave the size and cropping intact.
When you add a new figure, and figure caption, make sure you anchor the text from the caption box (using blue anchor box on text frames) (if its not inline with the text frame…) and it will update the figure number…. unless you anchor it, it will just become the last number in the document. You will need to do this with all figures. Just anchor them and they will flow and update when needed! Hope this helps!
Choose from a variety of workspaces designed for different proficiency levels and specific tasks: Page Layout and Illustration, a Classic option for longtime users, a Lite option for new users, Technical Illustration for pros doing isometric illustrations, Diagramming for pros using flowcharts and diagrams, and workspaces with the look and feel of Adobe Photoshop and Adobe Illustrator.
Want to get started on your publication right away? The good news is that Microsoft Publisher is now available for digital download. Once you’ve paid for the software, you’ll simply be able to download it directly from the Microsoft website. There’ll be no waiting around weeks for shipping. You’ll have access to your new publishing software straight away.
Sorry to hear it, but many thanks for the confirmation.  It will save me time looking for easier solutions.  I'll manually solve the problem this time, waiting until right before printing before I # the notes across docs manually, and think of a script if I continue to use InDesign after.  Still, I'm stunned that the coders have built in automatic page numbering, and yet not this.  Not much different for footnotes, as you suggest (check the final # of footnotes, increment by 1 and that is the # of the first footnote in the next doc), and as someone else mentioned. 

If you are sending the original .CDR file, you must provide all the required information. The best way to do this is to go to File > Collect for Output…, which creates a new folder with a copy of the .CDR file, the fonts used and the color profile. If you are using externally linked images, these files will be also be included. Optionally, you can also create a PDF.
Pros: I use this software from so many years ago and with the time they have always improve, I use this to modify and edit images vectorizing and making great design for my presentations, through the years Corel DRAW have added more features and options to make the design more complex and details, the bright options and the vectorizing tool are better than they were in the past, the details of the images is awesome and the extension are endless, for design this is one of my favorites.
Currently I’m struggling with figure numbering. I suppose there is some very easy solution to my problem and just have wasted too much time trying to find it myself. I use paragraph style for my figures, just the way you explained it. I don’t use cross-reference though. I don’t need it right now. I have similar problem as Giles. Every time I change an order of my figures, but within one, the same page, their order number doesn’t update and I don’t see any option neither to change it manually nor update it automatically. What am I missing?
Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
Leverage all the power you need to publish, share and output important technical documents, including a new capability to publish to WordPress. Using a diverse set of cross-media publishing and distribution capabilities, including CGM, WebCGM, SVG, PDF, and 3D PDF, you will ensure all of your important technical files will be delivered in a readable format and accessible through online, print and mobile options.
Hi David, i just figured this out, using CS6, if you place all your graphics and set up a figure number style, and place some of your styles in an inline text frame and the ones that need to fall outside the text frame, the numbering will be off, UNTIL you take the blue anchor frame and anchor it to text of the stand alone graphics, then the figure numbers will then be in order. It also works on 11×17 pages where you have to link the figure number to the previous page and then Anchor Object options and use the Inline or above Line (position) to move text frame to the next page. :-)
      Here is what Corel has to say about the Premium service: “Premium membership is an optional benefit that only X6 users can elect to purchase annually on top of their perpetual license (it’s automatically included for current subscribers). We offer our premium members early access to new features, exclusive content and upgrades to the next major version of CorelDRAW. In the past year, we have added over 20 new features that only premium members have access to.”
So, to create multi-level headings, you need to use the Level option just to the right of the List drop-down box. My second- and third-level headings use the same list as the first-level headings (this is necessary), except that they are changed to Level 2 and 3, respectively. Then, when numbering the section heading, you can insert the number of the previous-level heading above it. These can be selected using the arrow to the right of the Number field and selecting one of the levels under “Insert Number Placeholder.” So, the text in the Number field for my second-level heading is ^1.^#^t and it is ^1.^2.^#^t for the third-level heading. This presents the multi-level heading with dots between the numbers and a tab between the numbers and the section heading.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files.
And I'll get there by choosing the Page that I want to affect.…In this case Page 9 and I'll double-click on that, so I can actually jump to it.…I'm going to select that page and then go to the Pages panel menu and choose…Numbering & Section Options.…You're going to also find that under the Layout menu, there it is, Numbering…and Section Options.…When you choose that, it let's you change the Page Numbers for any page you have…selected in the Pages panel, Right now it's set to Automatic Page Numbering,…
×