Cons: The basic disadvantage that I find is the same as it applies to any graphic software of vector character: you must have a computer equipped with a powerful and powerful processor that allows you to perform all the calculations necessary to design with this software, a task that becomes a lot slower to the extent that the number of data rises, as more elaborate designs are desired.
As far as figure or table numbering goes, the numbering needs to be done under the same list but on a different level. I use level 4 for my figures and level 5 for my tables. As an example, the figure style has this in the Number field: Figure^.^1-^#:^>. This renders any figure caption anywhere in the document correctly: Figure 3-7, Figure 5-2, Figure 1-11, depending only upon where in the text the style is applied. The ^. is a punctuation space. It’s slightly less than a regular space and keeps any cross-referenced figure instance from breaking over a line; so I’ll never see text like “…see Figure(line break)2-2 for a diagram of…” Also, the en space (^>) adds a nice distance between the figure number and the text explaining the figure.
To change the default, choose High Quality from the Default View menu in the Display Performance panel of Preferences. For good measure, I also unchecked Preserve Object Level Settings so that even graphics that are set to Fast or Typical (via Object > Display Performance) always display at High Quality. (But what about that big background graphic that is slowing you down? Put it on a layer and hide it. Don’t display it as a shadow of its former self.)
The secretary at my church sends be the bulletin to check and make corrections in each week. She uses Windows XP, Office 2003 Pro. and MSOffice 2003. I have the same programs on my computer, and my settings are the same as hers on here machine, however, the lines do not show up the same on mine as hers. She has two pages she sends and when I open it, there are three pages. I do not understand why.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
Overall: In 1997, when I was using a x486 PC, I did SO much with this program! I did dozens of flyers for my business, for more than 5 years. I designed and sent to press a video tape sleeve for a show we produced. I made all the chyrons for the TV show! We made PoP signs for the retail shop, we made files for banners and sent them to a sign maker.!
When you select terms like kanji for which a yomi is required and set the index marker using a shortcut, the New Page Reference dialog box will open automatically if the yomi has not been input, and the term selected will be displayed in the Topic Levels dialog box. Input the yomi corresponding to the text input in the Topic Levels box in the Yomi text box. When the same index entry appears on several pages, the yomi for all the index entries can be changed in a single step. To change only the index entry selected, select the page number in the Index panel and Page Reference Options from the Index panel menu.
You may want to set out an essay with two different number styles. In academic essays Roman numerals start after the title page until the body of the essay begins. For example this may include an abstract, table of contents, executive summary etc… Arabic numbers start from the main body of the essay. To achieve this you will need to use section breaks in your document. Change the number format in the Page Number Format window.

In December 2006 the sK1 open-source project team started to reverse-engineer the CDR format.[38] The results and the first working snapshot of the CDR importer were presented at the Libre Graphics Meeting 2007 conference taking place in May 2007 in Montreal (Canada).[39] Later on the team parsed the structure of other Corel formats with the help of the open source CDR Explorer.[40] As of 2008, the sK1 project claims to have the best import support for CorelDraw file formats among open source software programs. The sK1 project developed also the UniConvertor, a command line open source tool which supports conversion from CorelDraw ver.7-X4 formats (CDR/CDT/CCX/CDRX/CMX) to other formats. UniConvertor is also used in Inkscape and Scribus open source projects as an external tool for CorelDraw files importing.[41][42][43]


Sending a Word (or any format document) doesn’t convert anything when it is send as an attachment. The most common culprit, from my experience, is when the document uses fonts which the receiver(s) don’t have on their computer. In that case a different similar font is used. Using only fonts which come preinstalled on all Windows versions will solve many (but not all) of the incompatibility problems. Unfortunately, this won’t work on a different OS such as MacOS or Linux. The best solution is to convert the document to .pdf and it should work on all machines.
Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.
Click on the section of the document to which you want content added. Your document will feature multiple frames, into which text or pictures can be added. In most cases, Publisher places example text and photos in each template to provide you with a general idea of how to write and format your document. For example, if creating an envelope, Publisher inserts dummy addresses in the appropriate text frames on the document so you can replace the text with your own information.
Want to get started on your publication right away? The good news is that Microsoft Publisher is now available for digital download. Once you’ve paid for the software, you’ll simply be able to download it directly from the Microsoft website. There’ll be no waiting around weeks for shipping. You’ll have access to your new publishing software straight away.

If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:
      Here is what Corel has to say about the Premium service: “Premium membership is an optional benefit that only X6 users can elect to purchase annually on top of their perpetual license (it’s automatically included for current subscribers). We offer our premium members early access to new features, exclusive content and upgrades to the next major version of CorelDRAW. In the past year, we have added over 20 new features that only premium members have access to.”
PSDs take up significant memory, which can sometime cause problems when exporting as PDF. I would recommend avoiding PSD files for simple images that could just as easily be flattened when saved as TIFF or EPS. But in cases where using a PSD file really solves a problem, make sure it is 300 PPI and in CMYK color mode, and keep it at its actual size. And when exporting to PDF, double-check that the transparency flattening is set to high.
automatic page numbering Adobe Indesign CC 2014, how to insert page numbers. How to skip page number on cover page and back cover. How to start page number 1 after cover and contents page. How to start and end page numbering where you want.Macbook pro, iMac, macbook air, macbook, macbook retina display, macbook retina display 2, mac pro, iMac retina 5k display , mac mini,apple laptop ,custom page numbering. Page numbering tricks in Indesign CC, adobe indesign 2014. Page numbers. all about page numbers indesign. Page numbering advance Indesign. Windows, laptop, desktop.tutorial . how to page number indesign
When you start working with the new Properties panel, you’ll likely find yourself frustrated because it’s just “version 1” and is a work in progress. For example, when you see an ellipsis (…) at the lower right of a section, clicking it expands the section to show additional choices. However, currently the collapsed or expanded state isn’t “sticky” between sessions, so it often closes even when you want it to stay open.
Microsoft’s own Publisher program is a step down from those applications in both power and price, but not every version of Office includes Publisher, and it costs $140 to purchase separately. However, chances are good that you already own a copy of Microsoft Word, and that software has a host of desktop publishing tools that you can use to produce pages that rival the output of the best layout artist.
It's not good if the file is opened in a different version of the program because some things can change. For example, the fills of CorelDRAW X7 are quite different to those of previous versions and also allow selective transparency. For this reason, if you save the file back as a previous version, the program will ask if you want to convert text to curves and fills to bitmaps.
Pros: I use this software from so many years ago and with the time they have always improve, I use this to modify and edit images vectorizing and making great design for my presentations, through the years Corel DRAW have added more features and options to make the design more complex and details, the bright options and the vectorizing tool are better than they were in the past, the details of the images is awesome and the extension are endless, for design this is one of my favorites.
Pros: I know that everyone else in the world uses the Adobe suite of programs from graphic design, but I've been using CorelDraw for years and find it infinitely preferable. The layout of the program and the way various tools work I find to be much more straight forward and intuitive. What I can do in InDesign or Illustrator I can usually do in half the time, in Corel Draw.

Pros: I know that everyone else in the world uses the Adobe suite of programs from graphic design, but I've been using CorelDraw for years and find it infinitely preferable. The layout of the program and the way various tools work I find to be much more straight forward and intuitive. What I can do in InDesign or Illustrator I can usually do in half the time, in Corel Draw.
CK Note: Word 2007 - 2013 interface has an different automatic numbering scheme which I have been told is much less subject to corruption. Microsoft Word 2010 Bible by Herb Tyson, MVP. However numbering is still very imperfect in these later versions. I still recommend following Shauna Kelly's step-by-step instructions (see above) if setting up numbering in a template or in a document likely to be heavily edited. If you start without doing this and end up with "spaghetti numbering," fixing it will be a very large chore!

To make the best use of the first few pages of a newsletter, you should start a long story on one page and finish it on a later page. That way, you can fit more stories on the front page, which is what your readers will see first. You can accomplish this by placing the story in linked text boxes, so that when the first text box is full, excess text will automatically flow into the second text box.
The problem we are having is that 2 computers in our house are viewing special characters differently. For my job we use the plus minus sign a lot. One one computer it works fine, the other computer it appears like an upside down A. They both have word 2003, they both have windows XP and they both use the same printer. So, what is causing this and is there a way to rectify the problem?
Using Emoji fonts, you can include various colorful and graphical characters, such as smileys, flags, street signs, animals, people, food, and landmarks in your documents. Of course, you can’t just type an emoji inside InDesign, so to insert them, you can copy and paste them from another program, or double-click them inside the Glyphs panel (Type > Glyphs).
Cut and copy work in a similar way. Highlighting a piece of text, right-clicking and selecting copy/cut will store the text in memory [memory: used to store data ]. The difference is copy leaves the highlighted text behind where as cut removes it. To insert the copied/cut text into a different area of the document, a different document, or an entirely different application altogether, right-click and select paste.
Anyway, there's a good alternative: create a PDF. To do this, you can go to File > Publish to PDF (or go to File > Export (CTRL+I), and there choose PDF). But it is not enough just to create a PDF, since not all the PDF's have the same configuration. For example, a PDF for the web will produce a PDF of low quality but it will be a small file, suitable for attaching to an email or using on a web page. But for printing, we need the opposite: images of high quality and resolution. PDF settings is also a topic that requires a lengthy explanation, but this excedes the scope of the current tutorial. There are many different configurations, according to each company's work flow. But we propose a simple format that should work with most of the job outputs: choose PDF X-3 in the PDF Presets drop-down list, then go to "Settings" and change the "Compatibility" to Acrobat 8.0 or higher. Why? Because the PDF X-3 is a good standard but it has a default compatibility with Acrobat 4.0, which does not support transparencies and lenses. This problem is solved by changing the compatibility.
Another possible solution if this is a document that has to be read by several or many people is to consider (remember we are talking about a 300 page document) creating a eBook format. Then the reader has some control over the format, or they can leave it alone. With a document this large, I would often load it onto a laptop, eReader, even a phone as the possibility of me being able to find the time to read it at one sitting without interruptions are very slim. This is not effective for all situations but I have found that when I am doing an intensive white paper, which might run into this many pages, the audience likes the ability to move it around to various device as they are reading. You can read PDF in a eReader, but by establishing it in LIT or ePub format then can comfortably read it on a phone, tablet, eReader, or laptop, as well as the main computer. Free programs like calibre will do the conversions for you, as well as be available to read it. On my android phone and tablet I use Aldiko which reads ePub, also free, and as an added bonus you can use the Calibre as a content server to download to you phone or tablet.

You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.

As it's one of the many programs that come with Microsoft Office, there is a good chance you already have Publisher on your computer. It's been included with higher-end copies of Office for almost 20 years, offered as a lightweight alternative to professional layout software such as Adobe InDesign. Though it's rarely used in a professional capacity, Publisher remains a surprisingly capable desktop publishing application. It sports excellent typography tools and one of the best template selections we've ever seen. It comes up somewhat short in the area of graphics editing support, but given its strengths, especially its usefulness in creating long-form publications, Microsoft Publisher remains a great option for at-home users, earning our Top Ten Reviews Bronze Award.
If you’re not satisfied with these prefab styles, you can easily modify them: Right-click the style name in the Style gallery, and choose Modify. Make whatever changes you want (click Bold to render all the text in that style in bold type, for example), and click OK. Now all of the text in the document that you have formatted using that style will automatically update to reflect your change.
Currently I’m struggling with figure numbering. I suppose there is some very easy solution to my problem and just have wasted too much time trying to find it myself. I use paragraph style for my figures, just the way you explained it. I don’t use cross-reference though. I don’t need it right now. I have similar problem as Giles. Every time I change an order of my figures, but within one, the same page, their order number doesn’t update and I don’t see any option neither to change it manually nor update it automatically. What am I missing?
Meet Smashing Book 6 — our brand new book focused on real challenges and real front-end solutions in the real world: from design systems and accessible single-page apps to CSS Custom Properties, CSS Grid, Service Workers, performance, AR/VR and responsive art direction. With Marcy Sutton, Yoav Weiss, Lyza D. Gardner, Laura Elizabeth and many others.
My point is, if you (like myself) often work with large and/or highly complicated graphics, you may want to hold off on changing any global “Display Performance” settings and instead adjust the quality on a per-graphic basis. If you do change the global settings to “High-Quality Display” and start to notice the program lagging a bit, you should turn down the display settings of each graphic (starting with the largest) to “Typical Display” until that lag goes away. If you want to see a preview of what your graphics will ultimately look like use the “Presentation” (Shift+W) preview. Hope these tips help!

Not available in Word Online. Advanced design features, such as starting documents from a large selection of professionally designed templates hosted on Office.com, are only available in the Word desktop app. However, Office 365 customers can configure a document library to launch a custom template when a user creates a new document. To learn more, see Add a content type to a list or library.


Two more I always change are Appearance of Black and File Handling. I set my global default to Display and Print Blacks Accurately (I still don’t know who would not want this changed), and I constantly change my File Handling Default Relink Folder from Original Link Folder to Most Recent Relink Folder depending on what I’m doing in the file. I also ditch all of the colors from the swatches palette and set my default paragraph style to reflect my most-used font, hyphenation, h&j, etc.
First, create the text boxes by clicking the Insert tab on the Ribbon, clicking Text Box > Draw Text Box, and then dragging your mouse to draw a text box on the page. Repeat this step to create a second text box on a later page. Next, select the first text box and click Drawing Tools > Format > Create Link. The cursor will change to resemble a jug with a down-pointing arrow in it. Position the cursor over the second empty text box, and click once to link the two text boxes. Now when you type or paste text into the first text box, and there’s too much to fit in the first box, it will overflow into the second box. The best part is that you can edit within either box, and the text will automatically flow back and forth as you cut or pad the story.
Place the insertion point in the paragraph and choose Restart Numbering from the context menu or choose Type > Bulleted And Numbered Lists > Restart Numbering. In normal lists, this command assigns the number 1 (or letter A) to a paragraph and makes it the first paragraph in a list. In multi-level lists, this command assigns the first lower-level number to a nested paragraph.
×