There are a number of variables which may explain stability problems when running CorelDRAW on Windows XP 32\\64 bit, Windows Vista 32\\64 bit, and Windows 7 32\\64 bit operating systems. It is strongly advised that all operating system updates and CorelDRAW Graphics Suite X4\\X5 Service Packs be installed prior to troubleshootingapplication errors. It is also recommended that all system requirements are met prior to installing the application, since many older versions of CorelDRAW were never designed or tested to run on Windows Vista 32\\64 bit or Windows 7 32\\64 bit operating systems.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
The Capitalize dialog box provides a global solution for editing the capitalization of index entries so that you don’t have to edit entries one by one. For example, if you’ve indexed some of your entries as lowercase (cats) and others as uppercase (Cats), these entries will be considered separate topics. You can fix this problem by capitalizing selected entries.
Another common mistake: be careful when enlarging or reducing the size of the images. If you import an image, for example 15x10 cm at 300 dpi, but want to enlarge it to 45x30 cm, the resolution decreases proportionally (in this example, it's going to 100 dpi), so the quality will be affected. On the contrary, if you reduce the image to 3x2 cm the resolution will increase proportionally (in this example, 1500 dpi). Both are bad, so you should be careful with the resolution. Remember, 300 dpi should be the resolution at real size, not before enlarging or reducing.
It's not good if the file is opened in a different version of the program because some things can change. For example, the fills of CorelDRAW X7 are quite different to those of previous versions and also allow selective transparency. For this reason, if you save the file back as a previous version, the program will ask if you want to convert text to curves and fills to bitmaps.

Pros: Oh my, I have been using this program since 1997! Wow, I'm old! But the program has aged far better than I have, certainly. What's really remarkable is that despite all the years, the GUI is still intuitive and well laid out. It's also easier to 'ramp up from zero' (at least I think so, I'm sure I'm biased somehow having used it for so long) and get busy on real work.
Another common mistake: be careful when enlarging or reducing the size of the images. If you import an image, for example 15x10 cm at 300 dpi, but want to enlarge it to 45x30 cm, the resolution decreases proportionally (in this example, it's going to 100 dpi), so the quality will be affected. On the contrary, if you reduce the image to 3x2 cm the resolution will increase proportionally (in this example, 1500 dpi). Both are bad, so you should be careful with the resolution. Remember, 300 dpi should be the resolution at real size, not before enlarging or reducing.
Whatever the design, many times your client will ask for an alternate color scheme or additional options for fonts and text attributes. In other cases, you may want more options for your design. Spending time creating these options manually can add hours and additional costs to your project. Instead, why not use “Styles” in CorelDRAW? In this webinar, Anand Dixit, CorelDRAW Master, graphic designer and trainer will show you how to create options for your designs in minutes, including:
When you start working with the new Properties panel, you’ll likely find yourself frustrated because it’s just “version 1” and is a work in progress. For example, when you see an ellipsis (…) at the lower right of a section, clicking it expands the section to show additional choices. However, currently the collapsed or expanded state isn’t “sticky” between sessions, so it often closes even when you want it to stay open.

When making an index for Japanese text, the yomi for index entries in the Topic Level box should be entered in the Yomi box using full-width hiragana and katakana. It is not necessary to input the yomi for full-width hiragana, katakana, alphanumeric characters, some symbols, half-width alphanumeric characters, or index entries that only have symbols in the Yomi box. Entries input in the Topic Level box are sorted. In some cases, when full-width and half-width symbols are mixed in an entry, sorting may not take place as expected. An appropriate, yomi should be entered in these cases.
      There is nothing more igniting to create a firestorm of debate than those issues that surround a TOS or EULA. If I only had a dollar for every time I listened to a podcast or read an article that related to the constant debate on this TOS and that TOS. I can tell you that people just hate it when a company or government even comes close to taking away or even treading close to their rights.
Workspace settings are used to save customization information in CorelDRAW. Custom toolbars, menus and shortcut keys are all saved to the workspace on exit. The next time CorelDRAW is launched, all customization from the previous session is restored. On occasion however, problems may develop with custom workspaces which affect the operation of CorelDRAW. It may be required that the workspace be reset in order to improve application performance. For information on how to reset the workspace in CorelDRAW, refer to Resetting Application Defaults in CorelDRAW® and PHOTO-PAINT® Running on Windows®
This issue is bigger than Ben Hur and yet so few people know about it. As Leo has stated, printer and fonts can change the look when the document is opened on another computer. Problems due to printer characteristics are fairly easily fixed by setting the page setup on the target computer to be the same as that on the source computer. Fonts… well just stick to the common fonts on the source computer for maximal compatibility.

Originally, I had an other problem as well. The first no on a level 2-numbering refered to the section and not to the chapter. I had a book with 2 parts and 3-5 chapters in each part. The numbering then all started on 1 in book-part 1 and all on two in book-part 2, (i.e. figures in book-part 2 chapter 4 all numbered 2.1). I got around that by creating 8 dokuments/book parts for my 8 chapters, but if someone knows how to fix this properly Í’m eager to hear about it!

Therefore, if you send an image with 600 dpi or higher resolution, this will produce only slower and larger files but will not improve the resolution. Some people send images with 1800 dpi, 2400 dpi and more and this only creates much larger files, but does not increase the quality of the output. You'll see it better on screen if you zoom in on the image, but the printed result will be 300/400 dpi. Some people ask about inkjet printers that claim to print at 2400 dpi or more. There's a lot of confusion about this, since they use "dpi" (talking about printed dots per inch), which is the printing quality, not the resolution of the images. And, for large format printers (plotters), there is no need to use high resolution bitmaps ̶ on the contrary, the larger the size the lower the resolution needed. But, since they don't produce color separations and the printing process is totally different, the "300 dpi" standard is not applied to plotters, laser or inkjets.


Warning  Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
Organize and manage your font library with the intuitive Corel Font Manager and use your frequently used fonts without installing them, and work faster with fonts using the network storage feature. Quickly find and install fonts for your technical illustration projects, organize fonts for easy access, or manage unneeded fonts. In addition, you can browse and search online and local fonts, preview font glyph sets, create font collections, and more.

Word and Publisher were designed to provide specific solutions for different requests. If your document requires footnotes, endnotes, annotations, tables of contents or page numbers, use Word to create the document. Publisher's ability to position text and graphics, handle pantone images and merge text and images makes it ideal for brochures and other creative documents. You will save time and effort if you choose the correct application for your tasks.
Cons: The basic disadvantage that I find is the same as it applies to any graphic software of vector character: you must have a computer equipped with a powerful and powerful processor that allows you to perform all the calculations necessary to design with this software, a task that becomes a lot slower to the extent that the number of data rises, as more elaborate designs are desired.

Overall: I have used coreldraw for laser-printing various things and I have been able to make very basic use of the software due to my relatively limited exposure to it. Coworkers who have been using it for months on end can easily navigate the software but I find myself having to use the help tabs and google much more often than I would like for a design software. This is definitely a higher skill platform but is VERY powerful once you get used to it.
Another common mistake: be careful when enlarging or reducing the size of the images. If you import an image, for example 15x10 cm at 300 dpi, but want to enlarge it to 45x30 cm, the resolution decreases proportionally (in this example, it's going to 100 dpi), so the quality will be affected. On the contrary, if you reduce the image to 3x2 cm the resolution will increase proportionally (in this example, 1500 dpi). Both are bad, so you should be careful with the resolution. Remember, 300 dpi should be the resolution at real size, not before enlarging or reducing.
At this point, you could click OK and start your document. But, let's modify the scheme instead. Click the Define New Number Format button. In the resulting dialog, click the Font button and choose Chiller from the Font list and click OK (only once). Click inside the Number format control—to the left of the example character—and enter Heading, as shown in Figure D. Click OK twice. If you check the properties now (Figure B), you'll find a numbering scheme. Click OK once more to return to the document. Heading 1 in the Styles Quick Gallery displays the new numbering scheme.
Adobe has changed the name of Typekit to Adobe Fonts. However, it still appears as Typekit in some programs, such as Photoshop, which will undoubtedly cause some confusion for a while. But the confusion goes deeper than just branding. After all, the font called Adobe Garamond is an “Adobe font,” because it was designed and developed by Adobe. But hundreds of other fonts were designed and developed by other non-Adobe font foundries, and only licensed to be distributed through Typekit. Unfortunately, those are now also called “Adobe Fonts.” So when you’re talking with someone about “Adobe Fonts,” you need to be clear whether you’re referring to the fonts from Adobe or “the service formerly known as Typekit.”
LibreOffice has supported Publisher's proprietary file format (.pub) since February 2013.[4] Corel Draw X4 features read-only support. Adobe PageMaker also saves files with a .pub extension, but the two files are incompatible and unrelated. Publisher supports numerous other file formats, including the Enhanced Metafile (EMF) format, which is supported on Windows platforms. The Microsoft Publisher trial version can be used to view .pub files beyond the trial period.[5]
Overall: In 1997, when I was using a x486 PC, I did SO much with this program! I did dozens of flyers for my business, for more than 5 years. I designed and sent to press a video tape sleeve for a show we produced. I made all the chyrons for the TV show! We made PoP signs for the retail shop, we made files for banners and sent them to a sign maker.!

automatic page numbering Adobe Indesign CC 2014, how to insert page numbers. How to skip page number on cover page and back cover. How to start page number 1 after cover and contents page. How to start and end page numbering where you want.Macbook pro, iMac, macbook air, macbook, macbook retina display, macbook retina display 2, mac pro, iMac retina 5k display , mac mini,apple laptop ,custom page numbering. Page numbering tricks in Indesign CC, adobe indesign 2014. Page numbers. all about page numbers indesign. Page numbering advance Indesign. Windows, laptop, desktop.tutorial . how to page number indesign
Active X controls, embedded OLR objects, and a signature line will display in the document as expected in View mode. In Edit mode, they appear as placeholders that you can delete but not edit. They cannot be moved or resized in Word Online. Advanced controls and macros are only available in the Word desktop app. Learn more about differences between using a document in the browser and in Word.
Publish to 3D PDF with interactive viewing of 3D content in combination with other visual and text elements. Export from Corel DESIGNER to 3D PDF to generate output with all pertinent data and graphics in one document for cross-media publishing. 3D PDF files can be viewed with free PDF reader applications that are installed on almost any desktop or laptop computer.
Pros: CorelDRAW is a software that I started using years ago out of curiosity, the design caught my attention and I had the opportunity to learn the basics of the program and with basic saying I mean a great variety of applications, it is a complex program but I consider it very valuable to learn it to use. Despite not being an expert I have been able to develop designs that have complemented various activities, such as the design of the logo of the degree promotion. The quality offered by this program undoubtedly deserves recognition. Undoubtedly CorelDraw is synonymous with perfection
Benefit from the versatile authoring tools in CorelDRAW® Technical Suite 2018 that allow you to create detailed assembly instructions, complex user manuals, multi-faceted documentation and more. Achieve unsurpassed productivity with new, high-caliber features to accelerate efficiency, and get full support for technical standards to publish, share or print with this expansive technical illustration and drafting software.
Re: Number 4, you state “ a brilliant production artist mentioned to me that nobody really knows picas except for people with newspaper training.” This is FALSE. None of the professionall designers I know worked in newspapers, and we all use picas because the units of measure make a lot more sense when used in conjunction with type sizes. 14 points of space after a paragraph is 0.1944 inches, and 15 points is 0.2083 inches. Picas and points are the measurement system of typography. Sure, you can measure in hectares if you’re the only one working on your files, but if you want to be taken seriously as a professional designer, you should learn the craft of your chosen profession. 
“I had wanted a Mac for a long time, for many reasons. I didn’t want to use a PC anymore, I wanted to try something different and the Mac is cool; so I got myself an iMac last month. In my free time, I do a lot of work in graphic design, image editing, and photography, and I’m a big fan of CorelDRAW. For those who are not familiar with this program, CorelDRAW is a popular graphics and image editing software program on Windows systems. It was one of the first applications that I installed on my PC in the 90s, so I now have a large number of files that I’ve created using this over the years.
For example, you could have a single style that adds Space Below and Space After a paragraph, and then change this “space between” setting to zero points. If you apply this to a group of five paragraphs, the first paragraph would have space before, the last paragraph would have space after, and none of these paragraphs would have space added between them.

If we want to work with columns, we can also determine the number of columns and distance between them in "Tools > Options > Workspace > Document > Guides > Presets > User Defined > Columns". An important detail is, not to be confused with Paragraph Text columns which involves splitting a block of text into two or more columns (Text menu > Columns…). Dividing the page into columns does not automatically separate the text or content ̶ it's just a visual reference.


Using Emoji fonts, you can include various colorful and graphical characters, such as smileys, flags, street signs, animals, people, food, and landmarks in your documents. Of course, you can’t just type an emoji inside InDesign, so to insert them, you can copy and paste them from another program, or double-click them inside the Glyphs panel (Type > Glyphs).

In its first versions, the CDR file format was a completely proprietary file format primarily used for vector graphic drawings, recognizable by the first two bytes of the file being "WL". Starting with CorelDraw 3, the file format changed to a Resource Interchange File Format (RIFF) envelope, recognizable by the first four bytes of the file being "RIFF", and a "CDR*vrsn" in bytes 9 to 15, with the asterisk "*" being in early versions just a blank.[33] Beginning with CorelDraw 4 it included the version number of the writing program in hexadecimal ("4" meaning version 4, "D" meaning version 14). The actual data chunk of the RIFF remains a Corel proprietary format.
As I mentioned above, you can now convert footnotes to endnotes and endnotes to footnotes in your document. To convert footnotes and endnotes, choose Type > Convert Footnote and Endnote. In the dialog box, you can specify whether you want to convert all the endnotes and footnotes in your document or only from the selection. Also, when importing Word or RTF files, there is now an option to place Word endnotes as static notes. Choosing static notes imports endnotes the way they were imported in InDesign CC 2017 before InDesign’s own endnote feature was introduced.
- On occasion you may have content…you'd like appearing at the top of every page.…Maybe at the bottom of every page.…How about automatic page numbering for example.…That's what we're going to talk about in this movie…and we're going to do it with our with our…Landon Hotel newsletter we've been building.…And here as we look at page one,…zoomed in to see the whole page…I don't see any page numbering there.…If we go to pages two and three,…well it looks like there might be something up there…at the top left and top right hand corner.…So let's zoom in and I'm going to use the slider…and go to around 100% and just scroll up…to the top of the pages,…and let's move over to the left hand side.…
      Well, there you have it. CorelDRAW has finally chosen to fall in with the rest of the software world and force users to be legal. This may seem a little harsh in tone, but this is really what they are doing. For some of you out there, the time has come for you to “pay the piper” if you choose to upgrade to a new version of CorelDRAW. To its credit, Corel will now be allowing multi-user discounts for those installs where there are a number of users. Is it right? Sorry, but yes it is. Most other software programs already have the same ELUA and TOS. Corel really is finally putting their proverbial foot down and saying, “We are going to control this in terms of each user having their own license.” If you are one of those people who buys one copy and installs it on ten computers in your office, then you will not be allowed to do this once you have upgraded to X6.1 or higher.
© Corel Corporation. All rights reserved. The content herein is in the form of a personal web log ("Blog") or forum posting. As such, the views expressed in this site are those of the participants and do not necessarily reflect the views of Corel Corporation, or its affiliates and their respective officers, directors, employees and agents. Terms of Use / Privacy​ ​/ ​Cookies / Terms and Conditions / User Guidelines.
To create an index entry which refers to another entry, select one of the cross-reference options (such as See or See also) from the Type pop‑up menu, and input the entry name in the Referenced text box, or drag the existing entry from the list at the bottom to the Referenced box. You can also customize the See and See also terms displayed in the cross-reference entries by selecting Custom Cross Reference from the Type pop‑up menu. (See Add “See” or “See also” cross-references to an index.)
×