Pros: CorelDRAW is mostly used software in world of graphics designing in computer and printing press industry. It is the largest world using software that support approximately all languages including unicode languages. It has a lot of tool sets built in the software to design beautiful graphics. It is also using in the newspapers, magazines and books publishing markets. In Pakistan everyone who want become a designer it should have great skills on CorelDRAW. Now these days there are many free and open source softwares available for designing but CorelDRAW is beating all of them.
Capture your intended drawing shape with exactness using the Outline Position options that recognize line width measurements for object dimensions. Use Dynamic Guides so all elements of your technical illustration are intuitively placed in their intended positions with precision. Speed up the creation of all kinds of technical graphics incl. pipes and wires with the Parallel Drawing mode in Corel DESIGNER.
If you know in advance that you need outline numbering for your paragraphs, you will want to choose the correct format from the Bullets and Numbering dialog box. Applying one of the preset formats to a paragraph or paragraphs that are already bulleted or numbered applies it to the entire list. There is a specific tab for outline numbers — the Outlined Numbered tab.
Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.
I’m new to InDesign, and thought I had sorted out figure numbering but am having trouble with the way that figures are numbered in my document. I set it up as described in this post, but some of my figures are in line and the captions are just another line of text in the body of the story, while others are full page graphics with text box captions that are not linked to the body of the document. Currently, the figure numbers run sequentially through the figures that are in line in the document, and then continue with the full page graphics. The problem is that the full page graphics come before any of the in line graphics, so they are out of order. Is there any way to correct this?
Word Online displays documents that are protected with Information Rights Management (IRM). However, these documents cannot be edited in the browser, and you cannot create IRM-protected documents in Word Online. Word Online can't open documents that are encrypted with a password. Advanced document protection features, such as creating IRM-protected documents and applying password-protection, are only available in the Word desktop app.

Finally, here’s a small but welcome improvement: in earlier versions of InDesign, when you exported a PDF, the default file name would be the last one you used for a PDF export—even though the document name may have changed. This would often cause errors or confusion when the PDF name didn’t match the document name it was made from. Now, when you export a PDF, a new checkbox option appears in the Export dialog box: Use InDesign Document Name as the Output Filename. (Note that the new feature also appears and works in other export formats as well.)

You may want to set out an essay with two different number styles. In academic essays Roman numerals start after the title page until the body of the essay begins. For example this may include an abstract, table of contents, executive summary etc… Arabic numbers start from the main body of the essay. To achieve this you will need to use section breaks in your document. Change the number format in the Page Number Format window.
Overall: I started learning graphic design on Corel way back when... and then I switched to Adobe and learned the ins and outs of that. Then eventually got a job that was already using Corel so I went back to it. They are very similar... I like them both in terms of Draw vs Illustrator... but Photo Paint vs Photoshop, well, Photoshop will beat them there. With that said, I can still make Photo Paint do what I want so it works.
Overall: I have used coreldraw for laser-printing various things and I have been able to make very basic use of the software due to my relatively limited exposure to it. Coworkers who have been using it for months on end can easily navigate the software but I find myself having to use the help tabs and google much more often than I would like for a design software. This is definitely a higher skill platform but is VERY powerful once you get used to it.

Capture your intended drawing shape with exactness using the Outline Position options that recognize line width measurements for object dimensions. Use Dynamic Guides so all elements of your technical illustration are intuitively placed in their intended positions with precision. Speed up the creation of all kinds of technical graphics incl. pipes and wires with the Parallel Drawing mode in Corel DESIGNER.
You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.
   However, one other thing that you can be assured of is that there is very little fanfare with the release of a new “service pack,” which has updates, fixes and/or enhancements for existing software. In fact, you might not even know the service pack exists unless your software notifies you. The same can be said for CorelDRAW. At the time of this writing, CorelDRAW had released four service packs since the initial release of version X6 in 2012. 

The problem we are having is that 2 computers in our house are viewing special characters differently. For my job we use the plus minus sign a lot. One one computer it works fine, the other computer it appears like an upside down A. They both have word 2003, they both have windows XP and they both use the same printer. So, what is causing this and is there a way to rectify the problem?

Microsoft Publisher, the desktop publishing component of the Professional version of the Office Suite, can perform many time-saving tasks for busy business owners, including layout and design work. It can even help you avoid a shopping run to try to find tickets for your next employee picnic, holiday giveaway or executive board meeting. Create your own tickets, including the vital sequential ordering needed for raffles or attendance tracking, using Publisher’s page numbering. With a few tricky manipulations of the page number process, you can start running the numbers in an entirely new fashion.
By default, bullets and numbers inherit some of their text formatting from the first character in the paragraph to which they’re attached. If the first character in one paragraph is different from the first characters in other paragraphs, the numbering or bullet character may appear inconsistent with the other list items. If this is not the formatting you desire, create a character style for numbers or bullets and apply it to your list by using the Bullets And Numbering dialog box.

15 May 1992[6] 3 1, 2, 3 2, 3 3.0, 3.1 (preferred) Included Corel Photo-Paint asp ( for bitmap editing), CorelSHOW (for creating on-screen presentations), CorelCHART (for graphic charts), Mosaic and CorelTRACE (for vectorizing bitmaps). The inclusion of this software was the precedent for the actual graphic suites.[7] CorelDraw for Unix also became available.[8][9] The fonts bundled with CorelDraw are no longer in the proprietary Corel format WFN, but in Type 1 PostScript fonts and TTF TrueType formats.


      As mentioned, you must have an account to get any updates now with version X6, which is different from earlier versions of CorelDRAW. In older versions, updating CorelDRAW with a service pack involved going to the Corel website and downloading the service pack. In more recent versions, the update could be done automatically via the Update command in the Help menu in the software. With Version 6.1, updates can only be done after you create an account with Corel and then log into the account via CorelDRAW.

We will create an imaginary logo, and we apply the Blue Style. Then, to create the background, double click on the Rectangle tool (Toolbox > Rectangle tool or F6), to create a rectangle the size of the page. We apply the Yellow Style, and we then create a gradient (we press the G-key to activate the Interactive Fill tool and drag the handles to adjust the gradient). Finally, we expand the size to cover the bleed area. As the card measures 90x50 mm, we will make the background of 96x56 mm, centered on the page (to center the background object, select and press P on the keyboard).

For the calendar job, I've used two master layers and four local layers. To create a master layer, click the New Master Layer (all pages) button at the bottom of the Object Manager docker. Objects placed on this master layer will appear on all pages of your design. Then, create the required number of regular or local layers (in this case, four) by clicking the New Layer button. You now have one page ready.


Yes! As a professionally trained typographer of more than 25 years, picas and points are THE standard for good typography. By their lack of recent use, it’s indicative that instructors are glossing over this very easy and important way of understanding layout measurements (type is not done in inches, period – inches are for the document size). Doing math with picas is so much easier than in inches. Want to divide that 11″ tall (66 picas) page into thirds easily? That would be 22 picas … and in inches it’s a messy 3.66666666. That last measurement is especially fun to find when you’re placing guides in a document – but 22 picas is easy. Buy a pica gauge, which will show both picas and inches, to educate yourself on how to create exceptional type (the beauty of the words and their layout should carry a piece, not the images alone).
In Figure 4, I placed six raster images from my sample files using the “gridify” feature, producing a 2 × 3 grid of frames. When the Make Content-Aware Fit preference was turned off, the images were placed using the Fit Content Proportionally option (in Object > Fitting). When Make Content-Aware Fit is turned on by default, the feature did a pretty good job of finding the useful content to include within the frames. Of course, you can continue to tweak the image position manually in individual frames after using the fitting command.

A quick way to create a bulleted or numbered list is to type the list, select it, and then click the Bulleted List or Numbered List button in the Control panel. These buttons let you turn the list on or off and switch between bullets and numbers. You can also make bullets and numbering part of a paragraph style and construct lists by assigning styles to paragraphs.
×