To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.


I also teach young people how to create good graphic design with coreldraw because i found this software to be an invaluable tool to make a living, it has really helped alot of businesses, companies and organizations to spread and advertise their products and generate more revenue for them selves in one way or another, to be frank with you, coreldraw is one of the best softwares i have ever seen in my life because of the wonders you can do with it, just try it out and see what i am talking about.
      2. You now will be monitored in the sense that each version of CorelDRAW that is running will be checking in with a server at Corel. You will only be able to have the program installed on three computers with only one computer being active at one time. In terms of installations, here is a response from a Corel employee, “What this three devices rule means is that you can install it (CorelDRAW) on your workstation, your laptop plus one extra computer without having to purchase additional licenses (most other software vendors limit this to one or two devices), with the condition that CorelDRAW is used by only you and that you never start the desktop software on two computers simultaneously. In other words, it is not OK to buy one box, install it on three computers and have three co-workers use CorelDRAW simultaneously (you need three licenses in that case). The EULA hasn’t changed between X6 and X6.1. This should be clear and is quite standard in terms of software. When you are logged into one of the standard accounts then Corel can verify this.”
the tools are much better than the competition, it is easier to vectorize and edit vectors. when exporting I think it has the most extensive file support, plus I can even open Illustrator files (which I can not do vice versa) the cleaping mask option is better than another, I can edit even the bitmap colors a lot easier without worrying about damaging the original file

Like the Control panel, the Properties panel changes based on what’s selected. The mode you’re working in (for example, Text Insertion or Linked File) appears listed at the top of the Properties panel. The rest of the panel is grouped into sections. For example, if you are editing text, the panel configures itself to show sections for Text Style, Appearance, Character, Paragraph, Bullets and Numbering, and Quick Actions (Figure 1).
Home Screen/Start workspace changes. The initial screen you see after launching InDesign is now called the Home screen, and it still appears as the Start Workspace. By default, it also appears any time that when no documents are open. You can turn it off by going to the General pane of the Preferences dialog box and turning off Show ‘Start’ Workspace When No Documents Are Open.

To create a running list—a list that is interrupted by other paragraphs or that spans multiple stories or documents—create a paragraph style and apply the style to paragraphs that you want to be part of the list. For example, to create a running list of the tables in your document, create a paragraph style called Tables, make a defined list part of the style, and then apply the Tables paragraph style to all paragraphs you want in your Table list.
try this…if you place all your graphics and set up a figure number style, and place some of your styles in an inline text frame and the ones that need to fall outside the text frame, the numbering will be off, UNTIL you take the blue anchor frame and anchor it to text of the stand alone graphics, then the figure numbers will then be in order. It also works on 11×17 pages where you have to link the figure number to the previous page and then Anchor Object options and use the Inline or above Line (position) to move text frame to the next page. :-)
In bulleted lists, each paragraph begins with a bullet character. In numbered lists, each paragraph begins with an expression that includes a number or letter and a separator such as a period or parenthesis. The numbers in a numbered list are updated automatically when you add or remove paragraphs in the list. You can change the type of bullet or numbering style, the separator, the font attributes and character styles, and the type and amount of indent spacing.
Waleed is a native Arabic speaker born in Menofeya (the northern part of the Nile Delta), Egypt. He is Adobe Certified Expert. He has over 13 years’ experience in multilingual design, desktop publishing and localization engineering. Over the years he has worked for localization and design companies verso and Future-Group working in the documentation desktop publishing and design departments. He also has comprehensive training and experience in many localization and CAT tools. He holds an array of professional certifications including, Adobe's ACE (Adobe Certified Expert), Adobe's Digital Imaging certification, CIW’s Certified Internet Webmaster and Programmer, IBM Web Programmer and Macromedia Designer and extensive application experience with the Adobe Creative Suite and Microsoft products. He is a graduate from Menoufia University with a B.A in English Language and Literature. His hobbies include gardening, swimming and traveling.
When working with large files in CorelDRAW, it may be required to increase the amount of memory allocated to the application. Default memory allocation is set to 25%. This can be increased to as high as 50%, though it is not recommended to exceed this level. Increasing this setting beyond 50% will reduce the amount of RAM being used by Windows, decreasing performance of the entire computer. It may also be required to change drives being used as swap disks. Drives with a high capacity of free space are ideally suited for swap disks. It is also recommended that the primary disk be set to a drive which does not contain the Windows partition. This will improve read and write times if specifying a drive with little or no disk activity.

CorelDRAW Technical Suite 2018 Enterprise license customers gain exclusive additional collaboration and sharing benefits from the new connectivity of Corel DESIGNER and CorelDRAW to Microsoft SharePoint sites, giving you direct access to your organization’s Document Management System (DMS) right from within the visual communication authoring applications.


A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
In bulleted lists, each paragraph begins with a bullet character. In numbered lists, each paragraph begins with an expression that includes a number or letter and a separator such as a period or parenthesis. The numbers in a numbered list are updated automatically when you add or remove paragraphs in the list. You can change the type of bullet or numbering style, the separator, the font attributes and character styles, and the type and amount of indent spacing.

I first refered directly to the chapter 1-level paragraph style, but then got problems when a new chapter started on a right-page and not a left page, some picutures refered the previous chapter style. I then copied the chapter 1-paragraph style and made small text boxes with just the paragraph number on each page that starts a new chapter. I changed the text colour to no colour.
      When you create an account, you are asked to choose one of the two memberships: standard or premium. As a default, you are assigned a standard subscription. This allows you to access some online products along with some fonts. You will be informed of any updates that are available to be downloaded and those downloads will be applied if you choose.
At least 20% of the corrupted file case, the culprit comes from the Page Panel. That thing is a mess and Adobe refuse to recognize its related issues. The thing is that the Page Panel update itself LIVE while you modify the content. It’s DOUBLE the memory usage from reading the page content regardless of the size of the thumbnails and it doesn’t load its content with references to the masters, but instead with reference to individual pages. This means, if you got 75 elements per pages while 30 of those are part of the masters, those 30 are loaded multiple time in the RAM at once as its reference to each page “current” state. Turning off the Preview in the Thumbnails stabilize the document (especially when you move/add/remove pages), but come at the cost that you need to know where you are in the document with the pages numbers. Some might hate it because it requires them to use their brain a bit more (and we all know we’re already over-use it), but it’s a give to receive situation.
Better performance when working with text. Improvements have been made in text performance—for example, in typing, deleting, adding columns, and inserting footnotes—providing a snappier performance. However, note that at the time of this writing, there is a frustrating performance problem that appears the first time you select the Type tool after launching InDesign. Fortunately, this long delay doesn’t appear again until the next time you launch InDesign.

A request for numbering headings in a new document doesn't have to elicit terror—it only sounds ghoulish. If you're good with styles, you might consider a custom numbered list style, but that's too much work. Instead, use Word's built-in heading styles for a painless process. My best advice is to get the numbering scheme in place before you create the document. Trying to number headings in an existing document really can cause nightmares!
In December 2006 the sK1 open-source project team started to reverse-engineer the CDR format.[38] The results and the first working snapshot of the CDR importer were presented at the Libre Graphics Meeting 2007 conference taking place in May 2007 in Montreal (Canada).[39] Later on the team parsed the structure of other Corel formats with the help of the open source CDR Explorer.[40] As of 2008, the sK1 project claims to have the best import support for CorelDraw file formats among open source software programs. The sK1 project developed also the UniConvertor, a command line open source tool which supports conversion from CorelDraw ver.7-X4 formats (CDR/CDT/CCX/CDRX/CMX) to other formats. UniConvertor is also used in Inkscape and Scribus open source projects as an external tool for CorelDraw files importing.[41][42][43]
If you need to create documents with drop caps, pull quotes, columns, text that wraps around images, and similar desktop publishing elements, you can do so in Word. The only problem is that these tools are scattered all across Word’s Ribbon user interface, and some are buried deep in arcane menus. I'll show you where to find them, and explain how to make the most of them.
InDesign CC makes a lot of assumptions about you. For example, it’s pretty sure that your world view is pretty Dark. It thinks you understand picas. And it’s pretty sure that you don’t want to take advantage of that gorgeous display your monitor offers. I can’t tell you why it makes these assumptions—but I can tell you where to change them if they’re not working for you. So if you’ve never customized your InDesign preferences, just press Command+K (Mac) or Ctrl+K (Windows) to open the dialog box and follow along.
      Well, there you have it. CorelDRAW has finally chosen to fall in with the rest of the software world and force users to be legal. This may seem a little harsh in tone, but this is really what they are doing. For some of you out there, the time has come for you to “pay the piper” if you choose to upgrade to a new version of CorelDRAW. To its credit, Corel will now be allowing multi-user discounts for those installs where there are a number of users. Is it right? Sorry, but yes it is. Most other software programs already have the same ELUA and TOS. Corel really is finally putting their proverbial foot down and saying, “We are going to control this in terms of each user having their own license.” If you are one of those people who buys one copy and installs it on ten computers in your office, then you will not be allowed to do this once you have upgraded to X6.1 or higher.
Publisher is included in higher-end editions of Microsoft Office, reflecting Microsoft's emphasis on the application as an easy-to-use and less expensive alternative to the "heavyweights" with a focus on the small-business market, where firms do not have dedicated design professionals available to make marketing materials and other documents.[1][2] However, it has a relatively small share of the desktop publishing market, which is dominated by Adobe InDesign and QuarkXPress.[1]
Pros: It has a very old-school user interface, while also being very simple learn and grasp. It has a great variety of features -- while not as many as Adobe Illustrator or as versatile as Affinity Designer -- are still plenty in general to make good art and even work with raster images. It also has a good stylus support, making it great for complex vector illustrations. And its also very stable and reliable.
Also, they have included a virus in their installation. You will receive POP-UP notifications at the most inopportune moments. These will inform you of the new products Corel is seeking to push onto you. Most annoying to have such on my own PC, code installed that is activated without my wanting it. That is what a virus is, is it not? Something that does something on your PC that you do not want!
Creating a numbered list is simple and most users catch on right away. One more thought before we move on—use numbered lists correctly. A numbered list, by its nature implies that the number of items or the order of those items has meaning. A list of simple facts, where neither order nor number have meaning is a bulleted list, not a numbered list. You can turn what might otherwise be a bulleted list by forcing a number into the mix, as I've done with our example list. Remove the word Seven from the title and you have a bulleted list!
The same happens with the styles of text and graphics. Suppose that we are working on a magazine, and we use Garamond, 24 pts for titles and Times New Roman, 11 pts for the body of the text. But after we have finished, our customer wants to change the fonts, and asks us to use Humanist777 - 30 pts for the titles and HelveticaNeue LT Pro 55 Roman - 12 pts for the body of the text. Although you can change it manually if we edit the Style of the titles it will change on all the pages in a second.

The easiest way to implement a numbering scheme for headings is to add one to a heading style. To illustrate, we'll modify Heading 1 by adding a numbering scheme. First, right-click Heading 1 in the Styles gallery (in the Styles group on the Home tab). Then, choose Modify as shown in Figure A to launch the Modify Style dialog. If you thumb through the default properties, you'll not find a numbering scheme (Figure B). Click the Format button and choose Numbering as shown in Figure B. If necessary, click the Numbering tab. Choose the predefined scheme that's the best match for what you want (Figure C).
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
      So essentially you now have the option to pay $99 per year and always have the latest version of the software for the term of your premium membership. For example, if you pay the $99 membership fee, you will automatically receive version X7 when it is released. Or you can just buy the latest version of the software and keep the standard account. You will miss out on the so-called extra online content which, hopefully, will evolve and provide more reasons to choose the premium service.
The Classification filter (Figure 7) shows the same categories and icons that are found on the Typekit/Adobe Fonts website for filtering fonts. There are icons for each of eight classifications that were available in earlier InDesign versions, such as Serif, Script, and so on. You can also select properties for weight, width, x-height, contrast, standard or CAPS only, and Default Figure Style.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
×