If the same characters are input in the Topic Level box, they are handled as separate index entries if a different yomi is entered. For example if “Cat” is input as an index entry with a reading of “Neko” in katakana, and then input a second time with a reading of “Neko” in hiragana, two index items for “Cat” will be generated. This feature can also be used to classify the same term under separate index topics. For example, when entering the term “The Cats” in an index, if “Cats” is input in the Yomi text box and two index entries are created without any input, the term “The Cats” will be generated under the T and C index topics.
Another common mistake: be careful when enlarging or reducing the size of the images. If you import an image, for example 15x10 cm at 300 dpi, but want to enlarge it to 45x30 cm, the resolution decreases proportionally (in this example, it's going to 100 dpi), so the quality will be affected. On the contrary, if you reduce the image to 3x2 cm the resolution will increase proportionally (in this example, 1500 dpi). Both are bad, so you should be careful with the resolution. Remember, 300 dpi should be the resolution at real size, not before enlarging or reducing.
CorelDraw is quite expensive to purchase outright. This makes it difficult for an independent user to justify such a large expenditure unless the software is used frequently. For most students, grad students or researchers who lack a big software budget, open-source applications may do the job just as well. But if you need a pro-grade tool that can handle any task, then you'll do well to purchase CorelDraw.
You Forgot to mention the awesome new Spinning Beach Ball Feature in Indesign 2019…. yea hundreds of upgraders report Spinning Beach Balls at every turn.. even in iMac Pros w/ 40GB of RAM.. Yea just like last year, riddled with Bugs. I’ll stick with 13.1.0 until March or April 2019 when Adobe addresses all this and more in the one and only update for the year. Quark is waiting stage left.
Capture your intended drawing shape with exactness using the Outline Position options that recognize line width measurements for object dimensions. Use Dynamic Guides so all elements of your technical illustration are intuitively placed in their intended positions with precision. Speed up the creation of all kinds of technical graphics incl. pipes and wires with the Parallel Drawing mode in Corel DESIGNER.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.
Use the callout drawing tool in Corel DESIGNER to add interactive functionality to callout shapes in technical publications. With the Object Data Manager docker, you can list metadata fields, such as WebCGM metadata, for any graphical or callout shape. Object data items can be edited so that shapes can be manually edited as hotspots for WebCGM output.
The easiest way to diagnose if a problem is file related is to try duplicating the problem with a new file. If the problem cannot be duplicated with a new document, the file at the source of the problems may be damaged or corrupt. In the event of a corrupt file which will no longer open in CorelDRAW, try importing the file into a new document. If this doesn't work, the file may be corrupt beyond repair and an attempt to open the backup should be made.
Footnote numbering is not continued across documents in a book. This is an expected behavior and not a bug. Please see the section Footnote numbering and formatting options in this URL: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6f37a.h tml. Please see attached screen: However, if you have threaded text frames across your book documents, then Footnote numbering will continue.
Of course, there are several types of jobs: magazines, business cards, brochures, etc. It's almost impossible to talk about all, but most of the settings are common for all jobs. But remember: it's very important to talk to the printing company before you start, because each company has its own rules and requirements. Cost is an important factor in any job, and any change (such as a change in the size or colors used), even minimal, can result in a change to the final price of the job.
You can insert page numbers on the current page, all pages, all odd pages, or all even pages. When you insert page numbers on multiple pages, a new master layer is automatically created, and the page number is placed on it. The master layer can be an all-page master layer, an odd-page master layer, or an even-page master layer. For more information about master layers, see Creating layers.
There it is. Page 2.…If I click inside there I can see it's actually…the word page and the number two.…So if I were to, for example, add additional pages…after page one these would labeled incorrectly…because there not using automatic page numbering.…So let's start by removing these by clicking the border,…and then hitting the Delete key on your keyboard.…
First, create the text boxes by clicking the Insert tab on the Ribbon, clicking Text Box > Draw Text Box, and then dragging your mouse to draw a text box on the page. Repeat this step to create a second text box on a later page. Next, select the first text box and click Drawing Tools > Format > Create Link. The cursor will change to resemble a jug with a down-pointing arrow in it. Position the cursor over the second empty text box, and click once to link the two text boxes. Now when you type or paste text into the first text box, and there’s too much to fit in the first box, it will overflow into the second box. The best part is that you can edit within either box, and the text will automatically flow back and forth as you cut or pad the story.
If we send the file to Print (File > Print or CTRL+P), notice that one card per sheet appears. But if we go to File > Print Preview, we can perform an Imposition (the second tool on the left), as well as set the gutter distance between the cards. Replays can be identical or different, why we chose it as the page number. We can also add Crop Marks (third tool), and many other options.
Enjoy a more natural drawing experience and achieve more expressive results with the native support for Microsoft Surface, and advanced stylus support. Take advantage of pressure, bearing, tilt, and rotation when using the touch-up tools, painting and other brush tools within the applications. Experiment with rotation, flatness and elongation settings to control your brushstrokes in any given illustration.
I am running Office 2010 and have some Word documents that are on a USB hard drive (attached to my computer) that is shared over the home office network. When i open any Word document form letters on my computer the auto date field is showing the date formula ( { DATE etc…} ) not the actual date, but from any other computer accessing the same files over the network the letters display the date fine. Any thoughts.
I am designing my first book on indesign for a client who wanted to turn an academic paper into a book therefore it has a lot of references in the footnotes. The format we are using is a super script number in the body text and end notes at the end of every chapter with a continuous numbering throughout the book.  I am importing text individually for every chapter but I have not managed to find a way to keep the footnote numbering continuous in this method. Also I am not very experienced in running scripts. 

To create an index entry which refers to another entry, select one of the cross-reference options (such as See or See also) from the Type pop‑up menu, and input the entry name in the Referenced text box, or drag the existing entry from the list at the bottom to the Referenced box. You can also customize the See and See also terms displayed in the cross-reference entries by selecting Custom Cross Reference from the Type pop‑up menu. (See Add “See” or “See also” cross-references to an index.)
×