Workspace settings are used to save customization information in CorelDRAW. Custom toolbars, menus and shortcut keys are all saved to the workspace on exit. The next time CorelDRAW is launched, all customization from the previous session is restored. On occasion however, problems may develop with custom workspaces which affect the operation of CorelDRAW. It may be required that the workspace be reset in order to improve application performance. For information on how to reset the workspace in CorelDRAW, refer to Resetting Application Defaults in CorelDRAW® and PHOTO-PAINT® Running on Windows®
You create, edit, and preview the index using the Index panel (Window > Type & Tables > Index). The panel includes two modes: Reference and Topic. In Reference mode, the preview area displays complete index entries for the current document or book. In Topic mode, the preview area displays only topics, not page numbers or cross-references. Topic mode is used primarily for creating the index structure, whereas Reference mode is where you add your index entries.
With Word Online, you can apply font, font size, and several font formatting attributes—including bold, italic, underline, and superscript. Highlight text, change font color, and clear formatting for selected text. Document theme formatting is available to format text in Word Online. Find the active theme fonts at the top of the Fonts gallery and theme colors in the Font Color gallery. Learn more about differences between using a document in the browser and in Word.
Use "Format Page Numbers" for specific changes, like types of numbers and chapter headings. If you want to go the extra mile, double-click on the header or footer once again. Click "Page Numbers," then click "Format Page Numbers" under the menu that appears. From here, you can set different types of numbers, like Roman numerals or letters, as well as customize the basic appearance of numbers. It is not incredibly robust, but it works.
One thing I find a little odd is if you break apart a line into two or more segments they are still considered part of each other. In other words, once it is broken apart, if you select one of the new segments, it will select all of them. I ended up deleting the others and making new separate one. It isn't a big deal, just a little weird when you first encounter it.
Pros: CorelDRAW is mostly used software in world of graphics designing in computer and printing press industry. It is the largest world using software that support approximately all languages including unicode languages. It has a lot of tool sets built in the software to design beautiful graphics. It is also using in the newspapers, magazines and books publishing markets. In Pakistan everyone who want become a designer it should have great skills on CorelDRAW. Now these days there are many free and open source softwares available for designing but CorelDRAW is beating all of them.
      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.
Microsoft Publisher’s templates make publication design easy. If you need to create a quick publication with minimal effort, you can simply use one of Microsoft Publisher’s many templates. There are hundreds of easy-to-use templates to choose from, which are designed to simplify the layout and make creating your ideal publication quick and easy. If you can’t find the template you’re looking for, simply go online and you’re bound to find one you can download for free!

Work quickly and efficiently with the added control for the Windows Real-Time Stylus pen-compatible tablets, such as the Microsoft Surface, in addition to the Wacom tablet and devices. Use pressure to vary the size of the eraser nib, and also link the tilt and bearing to its flatness and rotation. Flipping the stylus or pen activates the Eraser tool to erase on the fly without using the toolbox.
CorelDraw is quite expensive to purchase outright. This makes it difficult for an independent user to justify such a large expenditure unless the software is used frequently. For most students, grad students or researchers who lack a big software budget, open-source applications may do the job just as well. But if you need a pro-grade tool that can handle any task, then you'll do well to purchase CorelDraw.
Dear All, I have corel installed on two laptops. Both of these laptops have arabic support enabled via windows xp. I have been facing a very unusal problem, my problem is that one laptop writes digits in the Hindi numerical form (which are the digits that we use in the arabic writing), the other on doesnt, it only writes the Arabic numerical form (which are the digits used in the english langague). Both these computers have the same set of softwares on them. I have matched the settings for both on them in the control panel, and the font i use is the transparent arabic.

Produce illustrations that contain descriptive text, then output directly to the Translation Memory System (TMS), and process in Corel DESIGNER for translated results to use in multi-lingual global technical publication. Now, you can format text spanning multiple columns and use Corel DESIGNER to author complete user manuals or documents. Next, send the source language text for translation and receive translations to create localized documents literally with one click.
In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.
Publication design shouldn’t have to be complicated and if you use Microsoft Publisher, it won’t be. The software has a great drag and drop feature that allows you to quickly insert photos and other media into your publications. The drag and drop feature will save you no end of time. You can even drop content directly from your social media pages into your document!
However, note that just because you choose a font doesn’t mean your audience will see it. Fonts used for list or combo boxes are embedded (so the final viewer will definitely see them in the correct font). However, fonts you choose for text fields are not embedded in the PDF, and so the end user will only see the correct font if they’re using Adobe Acrobat or Reader and have those fonts active on their computer. If the fonts aren’t present, Acrobat and Reader will substitute Adobe Serif MM or Adobe Sans Serif MM.
Choose from a variety of workspaces designed for different proficiency levels and specific tasks: Page Layout and Illustration, a Classic option for longtime users, a Lite option for new users, Technical Illustration for pros doing isometric illustrations, Diagramming for pros using flowcharts and diagrams, and workspaces with the look and feel of Adobe Photoshop and Adobe Illustrator.

Microsoft Publisher might seem like a secondary choice next to so many dedicated competitors from other companies, but don't be fooled – this is some of the best publishing software around. Granted, it has its drawbacks – we wish it offered some more impressive graphic design tools – but as a product for laying out your family's next scrapbook page or putting together a new resume, it's one of the best. It has some of the best typography and template tools of any DTP software. Another hug bonus is its availability. Most people already have access to it, whether they know it or not, since it is included in the Microsoft Office package. This is multifunctional software that will help you create all kinds of documents and publications.


Use the callout drawing tool in Corel DESIGNER to add interactive functionality to callout shapes in technical publications. With the Object Data Manager docker, you can list metadata fields, such as WebCGM metadata, for any graphical or callout shape. Object data items can be edited so that shapes can be manually edited as hotspots for WebCGM output.

Pros: Oh my, I have been using this program since 1997! Wow, I'm old! But the program has aged far better than I have, certainly. What's really remarkable is that despite all the years, the GUI is still intuitive and well laid out. It's also easier to 'ramp up from zero' (at least I think so, I'm sure I'm biased somehow having used it for so long) and get busy on real work.
To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.
However, note that just because you choose a font doesn’t mean your audience will see it. Fonts used for list or combo boxes are embedded (so the final viewer will definitely see them in the correct font). However, fonts you choose for text fields are not embedded in the PDF, and so the end user will only see the correct font if they’re using Adobe Acrobat or Reader and have those fonts active on their computer. If the fonts aren’t present, Acrobat and Reader will substitute Adobe Serif MM or Adobe Sans Serif MM.

First, add the image to your Word document, select the image, and choose Picture Tools on the Ribbon toolbar. Click Format > Wrap Text > Tight. Now, with the image still selected, click Format once more and choose Edit Wrap Points. A red line with black markers, called wrap points, will appear around the image. Adjust this line by dragging the wrap points: You can drag the wrap points inward to wrap text over the image, or drag them outward so that the text moves away from the image. Drag on the line itself to create additional wrap points, as desired. When you’re done, click away from the image, and the wrap points will disappear.


Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.

The Classification filter (Figure 7) shows the same categories and icons that are found on the Typekit/Adobe Fonts website for filtering fonts. There are icons for each of eight classifications that were available in earlier InDesign versions, such as Serif, Script, and so on. You can also select properties for weight, width, x-height, contrast, standard or CAPS only, and Default Figure Style.
i have a similar but bigger problem… the thing is that i installed the same font on 2 different machines (both with same os and software) the font is gill sans condensed, but it looks different on each one… the machines have exactly the same stuff and configuration… i even checked the screen dpi, the font smothness, etc but had no luck, anyone had this problem before? they look way too different, as if it was another font, but if i open a flash document, it would warn you if the font wasn’t installed, but it doesn’t (so this means that the font is installed) it just displays different… any clue?

If you are using a background, or if an image is near the edge of the page, you should add extra space around the outside. This outer margin is called "bleeding" and is very important because the cut is not always as accurate as expected. This additional margin helps the process of post-printing a lot. You can specify the size of the Bleed when you choose the size of the page. Double-click on the edge of the page, or go to Tools > Options > Document > Page Size. In the section "Bleed" you can set the desired distance (usually 3mm or 0.125"). In addition, you can make this area visible by selecting "Show bleed area".
To change the default, choose High Quality from the Default View menu in the Display Performance panel of Preferences. For good measure, I also unchecked Preserve Object Level Settings so that even graphics that are set to Fast or Typical (via Object > Display Performance) always display at High Quality. (But what about that big background graphic that is slowing you down? Put it on a layer and hide it. Don’t display it as a shadow of its former self.)
As a final note, I also use this feature for my bibliography, which has about 230 references right now. (Thank goodness they finally added the capability to put text before the automatic number. InDesign CS2 is incapable of rendering an automatic list of bracketed numbers.) Anyway, the cross-referencing works great, but I run into the same problem that Dolati mentioned about having to manually change “Fig 2-3 and Fig 2-4” to “Figs 2-3 and 2-4.” Changing the linked text does cause problems when you update the cross references. So, I set up a character style (invisible) that changes the text to white and changes the tracking so that the text doesn’t take up any horizontal space. That way, when I have a set of references like [5][6][7][12], I type [5-7,12] next to the references and apply the invisible character style to the linked references. Then, I don’t have to worry about the linked text giving me a warning that it needs to be updated. Also if the reference numbers change, I can (1) change the invisible character style so that I can see the text, (2) update the typed reference, and (3) put the invisible character style back how it was. This solution is far from ideal, but it works.
CorelDraw full-suite comes with graphic design, page layout, photo editing and vector editing tools. Another plus point is the subscription plan is low compared to other products. We can simply run CorelDraw in low-budget devices. Because couple of years ago,i have used duel-core computer with only 1GB RAM. Also they provide good customer help and support to us. Really appreciate their service.
      What does this mean to you and me? Well, as I mentioned earlier, it could cost you more money to buy additional licenses. Also, unless you register and sign into Corel’s new membership program, you will not be able to receive updates to the program. It is this membership program that Corel is using to entice everyone to sign up. In terms of what has changed in Corel with the new TOS or EULA, here are the highlights.
Pros: I love corel draw, working with it has been an amazing experience, it has truly set us apart in the fact that our presentations, documents and poster's quality has improved greatly, we always get compliments from our clients. There is a major difference when presenting for example a pie chart taken directly from excel that one vectorized with corel and our clients love it.

In December 2006 the sK1 open-source project team started to reverse-engineer the CDR format.[38] The results and the first working snapshot of the CDR importer were presented at the Libre Graphics Meeting 2007 conference taking place in May 2007 in Montreal (Canada).[39] Later on the team parsed the structure of other Corel formats with the help of the open source CDR Explorer.[40] As of 2008, the sK1 project claims to have the best import support for CorelDraw file formats among open source software programs. The sK1 project developed also the UniConvertor, a command line open source tool which supports conversion from CorelDraw ver.7-X4 formats (CDR/CDT/CCX/CDRX/CMX) to other formats. UniConvertor is also used in Inkscape and Scribus open source projects as an external tool for CorelDraw files importing.[41][42][43]
      When you create an account, you are asked to choose one of the two memberships: standard or premium. As a default, you are assigned a standard subscription. This allows you to access some online products along with some fonts. You will be informed of any updates that are available to be downloaded and those downloads will be applied if you choose.
Few people think this feature is handy. Yet many of us frequently work with tables given to us by clients. The one I run into most often is the Excel spreadsheet of price listings and item features, which I have to make presentable for a catalog or sales collateral. Many designers recreate these tables from scratch to make them clean and attractive, but this can be time-consuming, especially with large tables.
Trajan Color Concept—an OpenType SVG font that now ships with InDesign—includes color information, via 20 stylistic sets with various colors and gradients. However, because OpenType SVG fonts are already colored, you cannot apply different colors to OpenType SVG fonts within InDesign. The colors can be viewed in PDF, EPUB, or Publish Online documents. (Just be aware that some PDF and ebook readers may not be updated yet to display this color information correctly!)

Let's say you want to use different page numbers or number formats and styles in different parts of your document. You could use page numbers such as i, ii, iii… for the introduction and table of contents and 1, 2, 3… for everything after. The trick is to divide the document into sections and to make sure those sections aren’t linked. Then, set the page numbering for each of those sections by following these steps.
One feature of the Adobe Creative Suite is the ability to copy and paste between its applications. But just because you can do this doesn’t mean you should. Vector files should still be created in Illustrator, and raster images should be saved in Photoshop. Not only will you be able to maintain control of these elements, but you’ll be saved from having to update every single occurrence of a given element in multi-page documents. Keep a given graphic in a separate Illustrator or Photoshop file, and you’ll be able to update all occurrences of it with one click.
At one time, only professional graphic designers used desktop publishing software. Then along came consumer-level desktop publishing software and an explosion of people who did desktop publishing for fun and profit, with or without a background in traditional design. Today, desktop publishing is still a career choice for some, but it is also increasingly a required skill for a wide range of jobs and careers.

Dear All, I have corel installed on two laptops. Both of these laptops have arabic support enabled via windows xp. I have been facing a very unusal problem, my problem is that one laptop writes digits in the Hindi numerical form (which are the digits that we use in the arabic writing), the other on doesnt, it only writes the Arabic numerical form (which are the digits used in the english langague). Both these computers have the same set of softwares on them. I have matched the settings for both on them in the control panel, and the font i use is the transparent arabic.
I have read up on the InDesign figures and cross referencing and have been testing this out. I am using separate text boxes for each figure description with the jump frames command. When I delete a figure the numbers automatically update and I can update the cross references. However, when I add a figure the numbers go out of sequence and I can’t work out how to update them. Perhaps there is another setting I need to change? Is there a way of numbering text boxes sequentially? I was able to thread boxes to update the numbers but this could lead to problems down the line…Any advice on this would be greatly appreciated.
As a magazine design, the process is similar but with a few differences. The first step, as always, is to define the format of the magazine. Suppose the finished magazine should measure 19x27 cm then double-click on the page border (this takes us to: Tools > Options > Workspace > Document > Page Size), and choose the size of two pages together: 38x27 cm (the bleed as always, should be 3mm but can be more if preferred).
Another way to import images and text is to simply drag them onto the document (from Mac’s Finder or Windows Explorer). This will automatically create an image or text frame, import the content and create a link to that file. If you drag content on top of an existing frame, it will replace the existing content but leave the size and cropping intact.

Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.
I have installed MS 2007 home/studen on 2 computers in my home; a desktop and a laptop. The programs do not even have all the same fonts. The laptop has some fonts that the desktop doesn’t have and visa versa. Both systems are running Vista and both were installed with the same disk. I have also seen many occasions where the document comes through totally different. 

As far as figure or table numbering goes, the numbering needs to be done under the same list but on a different level. I use level 4 for my figures and level 5 for my tables. As an example, the figure style has this in the Number field: Figure^.^1-^#:^>. This renders any figure caption anywhere in the document correctly: Figure 3-7, Figure 5-2, Figure 1-11, depending only upon where in the text the style is applied. The ^. is a punctuation space. It’s slightly less than a regular space and keeps any cross-referenced figure instance from breaking over a line; so I’ll never see text like “…see Figure(line break)2-2 for a diagram of…” Also, the en space (^>) adds a nice distance between the figure number and the text explaining the figure.
Creating a numbered list is simple and most users catch on right away. One more thought before we move on—use numbered lists correctly. A numbered list, by its nature implies that the number of items or the order of those items has meaning. A list of simple facts, where neither order nor number have meaning is a bulleted list, not a numbered list. You can turn what might otherwise be a bulleted list by forcing a number into the mix, as I've done with our example list. Remove the word Seven from the title and you have a bulleted list!
Guess what happened? It’s likely you accidentally hit a keyboard shortcut that toggles off this preference. Check Use Typographer’s Quotes again, then lock it down by changing the keyboard shortcut. (Do you really need to toggle this off? If you need foot and inch marks, just use those keyboard shortcuts: Command+’/Command+Shift+” or Ctrl+’/Ctrl+Shift+”.)
×