Better performance when working with text. Improvements have been made in text performance—for example, in typing, deleting, adding columns, and inserting footnotes—providing a snappier performance. However, note that at the time of this writing, there is a frustrating performance problem that appears the first time you select the Type tool after launching InDesign. Fortunately, this long delay doesn’t appear again until the next time you launch InDesign.
Cons: The one thing i can say that i didn't pretty much like with coreldraw is that it is somehow hard to learn, it takes a long time before you get use to the user interface and also the shortcut keys are not common unlike the Microsoft shortcut keys that are straight forward, but once you get use to the system, then sky is your limit because it's fun working with coreldraw and so many wonderful things can be done on it.
Thank you very much for this! It seems to do the trick! I have about 80 images in each chapter of my document so I am hoping this will work throughout…It seems that anchoring the figure number text frames to the (cross-referenced) figures in the main text works….There are some pages where I only have images and figure descriptions so I think I will anchor the figure descriptions to each other in this instance….unless there is a better way of doing this? Is it possible to anchor the text frame to the text within the box itself?!
I am designing my first book on indesign for a client who wanted to turn an academic paper into a book therefore it has a lot of references in the footnotes. The format we are using is a super script number in the body text and end notes at the end of every chapter with a continuous numbering throughout the book. I am importing text individually for every chapter but I have not managed to find a way to keep the footnote numbering continuous in this method. Also I am not very experienced in running scripts.
Not working on Mac, but had the same issue on my PC (both in v.13 and 14). It disappeared after uninstalling CC Desktop Application after finishing ID installation (with Adobe uninstaller – https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html) I’m not using CC Cloud so it’s not a problem for me, but I guess it will be a problem if somebody actually needs CC Desktop APP.
Regarding the display settings, InDesign users who are still using CS6 or earlier will often take a serious performance hit by setting “Display Performance” to “High-Quality Display” if they have any high-res raster images or complex vector graphics. I assume that this is due to there not being a 64-bit version of InDesign before CC. Even if you have a high-end machine, 32-bit programs can’t utilize all of your system’s resources. And even with the 64-bit CC version, you’ll have performance issues if you use enough high-res/complex graphics in one document. Unlike Photoshop and Illustrator CC, InDesign has no option to use graphical hardware acceleration – i.e. it can’t use a dedicated graphics card, so all of the computations have to be run through the CPU; this too can bottleneck it’s performance.
Track essential design details and key information with dynamic callout tools. Sticky callouts will connect or "stick" to source objects as they are moved around or modified. You can also link callout text to source shape metadata. Callouts based on object metadata are dynamic, helping you efficiently and consistently implement updates and changes.
Warning Making even minor changes to an outline numbering scheme won't necessarily change the initial position you've selected in the gallery, but rather may create a new gallery position, overwriting an existing one. Because of this problem, attaching numbering to styles is strongly recommended. This is covered in greater detail later in this chapter and in the chapter on Styles.
“Each license should only be used by one person. It can be installed up to three times for the convenience of being able to use it on a laptop vs. desktop vs. tablet. The license can only be open and running on one machine at a time. More information is available in our EULA (www.corel.com/eula). In the scenario you described, the company would need to buy four full licenses of CorelDRAW Graphics Suite X7, or if they have one license of X6 or X5, they could purchase one upgrade and three full licenses. We do validate serial numbers from previous versions when installing a purchased upgrade, so it’s not possible to install an upgrade if you do not own one of the two previous versions of CorelDRAW (i.e. you must own X4 or X5 to purchase an upgrade of X6). That being said, we also offer volume licensing prices for anyone buying two or more copies of CorelDRAW.”
Originally, I had an other problem as well. The first no on a level 2-numbering refered to the section and not to the chapter. I had a book with 2 parts and 3-5 chapters in each part. The numbering then all started on 1 in book-part 1 and all on two in book-part 2, (i.e. figures in book-part 2 chapter 4 all numbered 2.1). I got around that by creating 8 dokuments/book parts for my 8 chapters, but if someone knows how to fix this properly Í’m eager to hear about it!
If you're using Word Online, you can add page breaks but not section breaks. If you have the Word desktop application, use the Open in Word command to open the document. When you’re done and you save the document, it will continue to be stored where you opened it in Word Online. If you don’t have Word, you can try or buy it in the latest version of Office now.
A Vector and a Bitmap application are its main components but you also get a Font Manager, tons of clip-arts and assorted useful components such as to import and export all formats and it runs any plug-in you would use in PhotoShop, plus customised color pallets and native support for cmyk for most any kind of publishing you may want to create in it, as well as x-1A PDF export, editable presets or custom PDF settings as well.
Running captions number figures, tables, and other items consecutively in a document. For example, the first figure caption starts with the words “Figure 1,” the second with “Figure 2,” and so on. To make sure that figures, tables, or similar items are numbered consecutively, define a list for the item, and then create a paragraph style that includes the list definition. You can also add descriptive words such as “Figure” or “Table” to the numbering scheme of the paragraph style.
At one time, only professional graphic designers used desktop publishing software. Then along came consumer-level desktop publishing software and an explosion of people who did desktop publishing for fun and profit, with or without a background in traditional design. Today, desktop publishing is still a career choice for some, but it is also increasingly a required skill for a wide range of jobs and careers.
Publish to 3D PDF with interactive viewing of 3D content in combination with other visual and text elements. Export from Corel DESIGNER to 3D PDF to generate output with all pertinent data and graphics in one document for cross-media publishing. 3D PDF files can be viewed with free PDF reader applications that are installed on almost any desktop or laptop computer.
First, add the image to your Word document, select the image, and choose Picture Tools on the Ribbon toolbar. Click Format > Wrap Text > Tight. Now, with the image still selected, click Format once more and choose Edit Wrap Points. A red line with black markers, called wrap points, will appear around the image. Adjust this line by dragging the wrap points: You can drag the wrap points inward to wrap text over the image, or drag them outward so that the text moves away from the image. Drag on the line itself to create additional wrap points, as desired. When you’re done, click away from the image, and the wrap points will disappear.
By default, bullets and numbers inherit some of their text formatting from the first character in the paragraph to which they’re attached. If the first character in one paragraph is different from the first characters in other paragraphs, the numbering or bullet character may appear inconsistent with the other list items. If this is not the formatting you desire, create a character style for numbers or bullets and apply it to your list by using the Bullets And Numbering dialog box.
If you are using a background, or if an image is near the edge of the page, you should add extra space around the outside. This outer margin is called "bleeding" and is very important because the cut is not always as accurate as expected. This additional margin helps the process of post-printing a lot. You can specify the size of the Bleed when you choose the size of the page. Double-click on the edge of the page, or go to Tools > Options > Document > Page Size. In the section "Bleed" you can set the desired distance (usually 3mm or 0.125"). In addition, you can make this area visible by selecting "Show bleed area".
But not all documents can use the CMYK color mode, because it requires 4 inks. If you create a file with only two or three colors (e.g. blue and yellow) perhaps it is best to use only two or three colors (Spot Colors), such as Pantone colors. In addition, not all colors can be printed using CMYK, e.g. "Gold", "Silver", etc. Some bright colors can only be achieved by using special inks, and these cannot be achieved with CMYK. Spot colors are also important for "non-printing objects" (for example, an outline to die cut) or "overprinted objects" (such as UV varnish). It's not only vectors that can use spot colors, also bitmaps can use Spot Colors. On the Bitmap Menu go to Mode > Duotone and convert the bitmap to one ("monotone"), or more spot colors.
Ole’s tale: “Late night. The pale glow from the monochrome monitor of my Compugraphic phototypesetter. The smell of the office standard ‘French Vanilla’ coffee—warming, now, for several hours and resembling nothing so much as battery acid. The gentle snoring of one of the staff writers, who is curled up in the warmth of the unit that holds the filmstrips containing the fonts I’m using to set his story.
Another preference that mimics Microsoft Word is Autocorrect. If you type in InDesign a lot, turning it on is worth a try. Check Enable Autocorrect in the Autocorrect panel of the Preferences dialog box. Tip: You can use Autocorrect as a poor man’s macro as well. For example, a recent project used the phrase “financial capabilities program” over and over. To speed up the typing of this tedious 30-character phrase, I added a new Autocorrect entry that automatically changed “fcp” to “financial capabilities program.”
If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Here is what Corel has to say about the Premium service: “Premium membership is an optional benefit that only X6 users can elect to purchase annually on top of their perpetual license (it’s automatically included for current subscribers). We offer our premium members early access to new features, exclusive content and upgrades to the next major version of CorelDRAW. In the past year, we have added over 20 new features that only premium members have access to.”
Number Pro does not create your raffle ticket or document it just allows an easy way to number them. Check out Number Pro, take a look at the demo videos and even try the demo of Number Pro to see how it works. Number Pro is a cloud based application meaning there is no download of the application. We access the application online in the members area. They offer a three year membership with unlimited use.
If you want you can rename this layer. Then simply "paste" (Edit > Paste or CTRL+V), to place the logos and background on the new layer. We can create as many pages as we need names, and all will have the same logo and background. But the advantage is, that it will only exist once in the file: and if you modify one element it will be changed on all pages. To avoid a change by mistake, we can "lock" that layer by clicking on the padlock icon on the Object Manager. Then, we just have to select the page and layer (usually, Layer 1), and enter the appropriate text (Name, Phone, etc)
It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.
The Newsletter Wizard gives you, as a default, four pages of newsletter with which to work.� For this project, we will only need two pages.� To become comfortable changing the Wizard-created template, we will guide you through the process of deleting two pages from the newsletter � namely, pages three and four.� This is easily done if you follow the steps below:
Multi-level numbering is quite easy, once you’ve figured out how to do it. I am using InDesign CS4 to write a technical dissertation, and it works great with my multi-level headings, such as “3.4.1 Partial Transient…”, and figures and tables throughout each section (or chapter). I do have the whole document in one file, but it’s not too large since the images are all linked.
Acrobat’s PDF comment and review features are widely used for marking up documents, but there has always been a frustrating limitation: you couldn’t see those comments where you needed to most… on your InDesign page! (There have been some third-party add-ons that have helped with this, including the Annotations plug-in from DTP Tools.) Now, with CC 2019, you can import comments added in Adobe Acrobat or Adobe Reader as part of a review process, and the comments will show in the context of your InDesign layout (Figures 8 and 9). Even better, InDesign can now make some changes for you, including inserting or deleting text that has been marked in the PDF!
Using an indexing shortcut, you can quickly index individual words, a phrase, or a list of words or phrases. Adobe InDesign recognizes two indexing shortcuts: one for standard index entries; the other for proper names. The proper name shortcut creates index entries by reversing the order of a name so it is alphabetized by the last name. In this way, you can list a name with the first name first, but have it appear in the index sorted by last name. For example, the name James Paul Carter would appear in the index as Carter, James Paul.