A CorelDRAW Graphics Suite expert, Roger has been a popular presenter at industry trade shows. He has developed and conducted classroom training and online sessions throughout North America and has authored articles for key industry magazines, including SQE Professional and The Screen Printers Resource Guide, and is a regular contributor to Trophex magazine. You can train with Roger using his book, Bring It Home with CorelDRAW: A Guide to In-House Graphic Design, or by watching his online course, CorelDRAW Essential Training.
If you're using Word Online, you can add page breaks but not section breaks. If you have the Word desktop application, use the Open in Word command to open the document. When you’re done and you save the document, it will continue to be stored where you opened it in Word Online. If you don’t have Word, you can try or buy it in the latest version of Office now.
When you add a new figure, and figure caption, make sure you anchor the text from the caption box to text inside your document (using blue anchor box on text frames) (if its not allready inline with the text frame…) and it will update the figure number…. unless you anchor it, it will just become the last number in the document. You will need to do this with all figures. Just anchor them and they will flow and update when needed! Hope this helps!
“I had wanted a Mac for a long time, for many reasons. I didn’t want to use a PC anymore, I wanted to try something different and the Mac is cool; so I got myself an iMac last month. In my free time, I do a lot of work in graphic design, image editing, and photography, and I’m a big fan of CorelDRAW. For those who are not familiar with this program, CorelDRAW is a popular graphics and image editing software program on Windows systems. It was one of the first applications that I installed on my PC in the 90s, so I now have a large number of files that I’ve created using this over the years.
Word Online automatically checks spelling as you type and applies a wavy red underline to misspelled text. Common AutoCorrect actions are included, such as correcting routine misspellings or converting characters to symbols. Additionally, you can set the proofing language or turn off the spelling checker for selected text. Learn more about differences between using a document in the browser and in Word.
If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Let's say you want to use different page numbers or number formats and styles in different parts of your document. You could use page numbers such as i, ii, iii… for the introduction and table of contents and 1, 2, 3… for everything after. The trick is to divide the document into sections and to make sure those sections aren’t linked. Then, set the page numbering for each of those sections by following these steps.

But not all documents can use the CMYK color mode, because it requires 4 inks. If you create a file with only two or three colors (e.g. blue and yellow) perhaps it is best to use only two or three colors (Spot Colors), such as Pantone colors. In addition, not all colors can be printed using CMYK, e.g. "Gold", "Silver", etc. Some bright colors can only be achieved by using special inks, and these cannot be achieved with CMYK. Spot colors are also important for "non-printing objects" (for example, an outline to die cut) or "overprinted objects" (such as UV varnish). It's not only vectors that can use spot colors, also bitmaps can use Spot Colors. On the Bitmap Menu go to Mode > Duotone and convert the bitmap to one ("monotone"), or more spot colors.

The PSD image format deserves special mention. Being able to import PSD files into InDesign is extremely useful when working with elaborate graphics that have transparent or semi-transparent elements, especially if they are to be placed over colored backgrounds or textures. Another useful feature is the ability to turn the layers in a PSD file on and off directly in InDesign (i.e. without having to open Photoshop).


As it's one of the many programs that come with Microsoft Office, there is a good chance you already have Publisher on your computer. It's been included with higher-end copies of Office for almost 20 years, offered as a lightweight alternative to professional layout software such as Adobe InDesign. Though it's rarely used in a professional capacity, Publisher remains a surprisingly capable desktop publishing application. It sports excellent typography tools and one of the best template selections we've ever seen. It comes up somewhat short in the area of graphics editing support, but given its strengths, especially its usefulness in creating long-form publications, Microsoft Publisher remains a great option for at-home users, earning our Top Ten Reviews Bronze Award.
Cons: There is a lot of features and that is not an understatement. As the result, it does take some time to learn about all of them. If I don't use it for a while, my learning curve goes up quite a bit but it also goes down just as fast. The one feature I do have trouble with is a perfect circle but the convert to curves and the grid function do solve that.

Since the first version of Adobe InDesign was introduced, several improvements have been made for creating numbered lists. The Bullets and Numbering dialog box lets you modify a numbered list and updates automatically when you add or remove paragraphs in the list. You can change the type of bullet, numbering style, character style, separator, font attribute and indent spacing.
I never place .eps files. I place the native .ai files instead and haven’t had a problem. I prefer points and picas, but that’s just my choice. I remember the olden days in college with fondness…when we actually learned about points and picas and drew letters with pencil on tracing paper to learn about line spacing, word spacing, and kerning. Our fonts were Helvetica, Bodoni, Garamond, and (oops, too vintage here…I forget). Type On!
The Capitalize dialog box provides a global solution for editing the capitalization of index entries so that you don’t have to edit entries one by one. For example, if you’ve indexed some of your entries as lowercase (cats) and others as uppercase (Cats), these entries will be considered separate topics. You can fix this problem by capitalizing selected entries.
Pros: CorelDraw is an excellent graphic app for creating great amazing graphic designs. This is my first time using the application and I find it easy and understandable. Its not hard at all. CorelDraw have many features and tools that will help you in creating amazing visual designs from webpages to book designs. Its easy at any level whether you are a new beginner in designing graphics or a highly skillful graphic artist. Every time I open this application I am never disappointed. Truly a great app. Another thing I really enjoy is that they have a CorelDraw Community where you can get together and share what you have learned. Great place to get assistance if needed.
If we send the file to Print (File > Print or CTRL+P), notice that one card per sheet appears. But if we go to File > Print Preview, we can perform an Imposition (the second tool on the left), as well as set the gutter distance between the cards. Replays can be identical or different, why we chose it as the page number. We can also add Crop Marks (third tool), and many other options.
Word's numbered list feature is easy to use but modifying the results isn't always as intuitive as you might like. As is often the case with Office, knowing the right setting to use and where to find it is the key. In this article, we'll take a basic look at Word's numbering feature and then move on to two common problems—indents and alignment—that are easy to solve if you know where to look and how to alter the setting to get the results you want.
Hi David, i just figured this out, using CS6, if you place all your graphics and set up a figure number style, and place some of your styles in an inline text frame and the ones that need to fall outside the text frame, the numbering will be off, UNTIL you take the blue anchor frame and anchor it to text of the stand alone graphics, then the figure numbers will then be in order. It also works on 11×17 pages where you have to link the figure number to the previous page and then Anchor Object options and use the Inline or above Line (position) to move text frame to the next page. :-)
As a magazine design, the process is similar but with a few differences. The first step, as always, is to define the format of the magazine. Suppose the finished magazine should measure 19x27 cm then double-click on the page border (this takes us to: Tools > Options > Workspace > Document > Page Size), and choose the size of two pages together: 38x27 cm (the bleed as always, should be 3mm but can be more if preferred).
Create isometric or other parallel projected technical illustrations for assembly and maintenance instructions by dynamically drawing on a projected plane. Project your existing planar objects to a desired plane instead of manually calculating the skew angle and rotation. Obtain more precision and exactness with the UI controls in Corel DESIGNER®, as users can draw and edit shapes using accurate measurements in isometric and other projected drawing modes.
Better performance when working with text. Improvements have been made in text performance—for example, in typing, deleting, adding columns, and inserting footnotes—providing a snappier performance. However, note that at the time of this writing, there is a frustrating performance problem that appears the first time you select the Type tool after launching InDesign. Fortunately, this long delay doesn’t appear again until the next time you launch InDesign.
On the "Objects" tab you had several important options. The standard PDF X-3 is good, so you don't need to change anything. In particular, it's not needed to convert text to curves, because the PDF will embed all the fonts. Use this option only if you use fonts with restrictions for print, but only a few fonts have this problem. The 'Convert to curves' option will create a bigger and more complex file, and some RIPs will have problems processing it. Since the fonts will be embedded, it is not necessary to convert text to curves.
These limitations will drive some InDesign users crazy, but there is an easy solution, at least for the first two problems: to have separate footnote numbering for a table, and place the numbering under the table rather than at the bottom of the page (interspersed with other footnotes), simply place each table in a text frame of its own. Then, if necessary, you can anchor that text frame into the larger text story. That said, if the new features still don’t meet your needs, check out Peter Kahrel’s article “Going Deep with Footnotes” in InDesign Magazine issue #95.

20 Mar 2012[26] X6 (16) 7 to X6 7 to X6 XP (32-bit only), Vista, 7, 8 Includes 64-bit and multi-core processor native support, support for 64-bit Adobe Photoshop plugins, and additional tools to import and export from Adobe Creative Suite and Publisher. Object properties, styles, and color styling have each been consolidated into their own docking toolbars. A new Unicode OpenType-based text engine modernizes text handling, including full international language support (the legacy text mode is retained). Dynamic alignment guides allow for easy repositioning without setting static guidelines. CorelConnect content organizer allows for in-application access to online sources such as Flickr for assets such as images and clip art. New tools permit manipulating vector images by pushing, pulling, smearing, etc. Various improvements in frame-based layout, masking, clipping and effects have been made.[27]
Word and Publisher were designed to provide specific solutions for different requests. If your document requires footnotes, endnotes, annotations, tables of contents or page numbers, use Word to create the document. Publisher's ability to position text and graphics, handle pantone images and merge text and images makes it ideal for brochures and other creative documents. You will save time and effort if you choose the correct application for your tasks.
Microsoft Publisher, the desktop publishing component of the Professional version of the Office Suite, can perform many time-saving tasks for busy business owners, including layout and design work. It can even help you avoid a shopping run to try to find tickets for your next employee picnic, holiday giveaway or executive board meeting. Create your own tickets, including the vital sequential ordering needed for raffles or attendance tracking, using Publisher’s page numbering. With a few tricky manipulations of the page number process, you can start running the numbers in an entirely new fashion.
If activated, you likely see the Desktop Alert in the lower right-hand corner of your screen every time you receive an email, displaying a quick preview of the email. The intent is that regardless of the application you are in, you can quickly view the email by clicking on the Desktop Alert. However, for many of us, the Desktop Alert only proves to be a distraction from various tasks at hand.
Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.
When you start working with the new Properties panel, you’ll likely find yourself frustrated because it’s just “version 1” and is a work in progress. For example, when you see an ellipsis (…) at the lower right of a section, clicking it expands the section to show additional choices. However, currently the collapsed or expanded state isn’t “sticky” between sessions, so it often closes even when you want it to stay open.
Cons: Many years have passed since the last Corel 7, which was probably the most used design software. And the new Corel has been updated but without taking advantage of small processors (as does its competition). It is necessary to have a lot of machine potential to be able to work fluently. Maybe it's a software architecture problem, but they should include some accelerator or something that makes work in small workstations fluid.
The easiest way to implement a numbering scheme for headings is to add one to a heading style. To illustrate, we'll modify Heading 1 by adding a numbering scheme. First, right-click Heading 1 in the Styles gallery (in the Styles group on the Home tab). Then, choose Modify as shown in Figure A to launch the Modify Style dialog. If you thumb through the default properties, you'll not find a numbering scheme (Figure B). Click the Format button and choose Numbering as shown in Figure B. If necessary, click the Numbering tab. Choose the predefined scheme that's the best match for what you want (Figure C).

      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.


In its first versions, the CDR file format was a completely proprietary file format primarily used for vector graphic drawings, recognizable by the first two bytes of the file being "WL". Starting with CorelDraw 3, the file format changed to a Resource Interchange File Format (RIFF) envelope, recognizable by the first four bytes of the file being "RIFF", and a "CDR*vrsn" in bytes 9 to 15, with the asterisk "*" being in early versions just a blank.[33] Beginning with CorelDraw 4 it included the version number of the writing program in hexadecimal ("4" meaning version 4, "D" meaning version 14). The actual data chunk of the RIFF remains a Corel proprietary format.
Overall: I started learning graphic design on Corel way back when... and then I switched to Adobe and learned the ins and outs of that. Then eventually got a job that was already using Corel so I went back to it. They are very similar... I like them both in terms of Draw vs Illustrator... but Photo Paint vs Photoshop, well, Photoshop will beat them there. With that said, I can still make Photo Paint do what I want so it works.
If you are preparing a document for print, keep your margins and bleeds in mind from the beginning. Your printer will give you the measurements for the bleed, but generally 1⁄8 inch or 3 mm should suffice. Approximately the same area within the document should be kept free of text and important graphic elements (such as the logo). Set up your document for bleed in InDesign as you create it by selecting the correct settings in the document set-up box.
If we want to work with columns, we can also determine the number of columns and distance between them in "Tools > Options > Workspace > Document > Guides > Presets > User Defined > Columns". An important detail is, not to be confused with Paragraph Text columns which involves splitting a block of text into two or more columns (Text menu > Columns…). Dividing the page into columns does not automatically separate the text or content ̶ it's just a visual reference.
Want to get started on your publication right away? The good news is that Microsoft Publisher is now available for digital download. Once you’ve paid for the software, you’ll simply be able to download it directly from the Microsoft website. There’ll be no waiting around weeks for shipping. You’ll have access to your new publishing software straight away.
Hello, I am having way too much trouble with Indesign to the point I just hate this program. I changed the visualization of the document in preferences like you said to high quality but the document which is from Illustrator still looks like crap when before it looked good. Also, the option in object that also says to change the visual quality is greyed out and I have no clue why aor how to change it. Getting desperate here, please help!

Another master layer is created for the names of the weekdays, which are also common to all pages. The sequential position of the background and the weekdays is different, which is why two master layers are needed. The weekdays layer is sixth from the bottom in the sequence of layers. This master layer must be placed on top of all layers (Figure 9).
By default, every time you open an InDesign document, the links to graphics and text files are checked. If anything is amiss, you get an alert rather than an open document. This seems slow to me, especially because I often open documents only to edit them. In many cases, I don’t even have the graphic files, so of course they are missing. InDesign is spending time checking something I already know about—and forcing me to respond with Don’t Update Links.
A quick way to create a bulleted or numbered list is to type the list, select it, and then click the Bulleted List or Numbered List button in the Control panel. These buttons let you turn the list on or off and switch between bullets and numbers. You can also make bullets and numbering part of a paragraph style and construct lists by assigning styles to paragraphs.
×