Excellent stylus support (including the ability to adjust stylus tilt, bearing and rotation in real time). A quick editing workflow. Each node has a distinct appearance depending on the handle or selection type, and the size, colours and shapes of the editing points are customisable via Options. More intuitive interactive sliders for gradients, blends, transparency and so on wrap up a decent release.

Another possible solution if this is a document that has to be read by several or many people is to consider (remember we are talking about a 300 page document) creating a eBook format. Then the reader has some control over the format, or they can leave it alone. With a document this large, I would often load it onto a laptop, eReader, even a phone as the possibility of me being able to find the time to read it at one sitting without interruptions are very slim. This is not effective for all situations but I have found that when I am doing an intensive white paper, which might run into this many pages, the audience likes the ability to move it around to various device as they are reading. You can read PDF in a eReader, but by establishing it in LIT or ePub format then can comfortably read it on a phone, tablet, eReader, or laptop, as well as the main computer. Free programs like calibre will do the conversions for you, as well as be available to read it. On my android phone and tablet I use Aldiko which reads ePub, also free, and as an added bonus you can use the Calibre as a content server to download to you phone or tablet.

Instantly find images on your local network and search online portals and websites, and easily access content using built-in content assistant Corel® CONNECT. Organize assets by type or project in trays that are shared between Corel DESIGNER, CorelDRAW, Corel PHOTO-PAINT and Corel CONNECT for maximum efficiency. Utilize the Content Exchange and the tray synchronization option with Microsoft OneDrive.

There are many reasons why you might want to adjust the size of a layout, but the three most common adjustments are to page size, margins, or amount of bleed. It’s extremely easy to change any of these in InDesign, but changing them and altering your text frames and other page elements has long been a huge hassle. The new Adjust Layout feature in InDesign CC 2019 comes to the rescue.
I have found that even the same letter fonts within word vary from installation to installation. If you want to establish a estandar in portable documents definetely use PDF but if you MUST MUST be able to see a word document exactly as it is seen in another computer (because you have put a lot of work already fixing it and its too long) what you can do is in the original computer where the the documents looks right, go to c:/windows/fonts then copy all fonts and paste them to a pendrive. then go to the computer where the document is not been seen right and install all fonts anew. It will say that some fonts are already installed, its ok if you do not install them and install everything else. This way you ensure that every font used in the original computer is also in the other one and no sustitue is being used. Good luck!
A request for numbering headings in a new document doesn't have to elicit terror—it only sounds ghoulish. If you're good with styles, you might consider a custom numbered list style, but that's too much work. Instead, use Word's built-in heading styles for a painless process. My best advice is to get the numbering scheme in place before you create the document. Trying to number headings in an existing document really can cause nightmares!
If you know in advance that you need outline numbering for your paragraphs, you will want to choose the correct format from the Bullets and Numbering dialog box. Applying one of the preset formats to a paragraph or paragraphs that are already bulleted or numbered applies it to the entire list. There is a specific tab for outline numbers — the Outlined Numbered tab.
Footnote numbering is not continued across documents in a book. This is an expected behavior and not a bug. Please see the section Footnote numbering and formatting options in this URL: http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6f37a.h tml. Please see attached screen: However, if you have threaded text frames across your book documents, then Footnote numbering will continue.
Ensure a consistent look, style, and layout throughout your design projects with Object Styles, Color Styles and Color Harmonies. With the enhanced Object Styles in Corel DESIGNER, you can manage object styles, such as outline color, line style, line width, halo, fill type and color, and text styles. You can then create symbol libraries that can be accessed and used across projects. Reuse the style definitions that you create once and apply to the individual components in the custom symbols.
CorelDraw is quite expensive to purchase outright. This makes it difficult for an independent user to justify such a large expenditure unless the software is used frequently. For most students, grad students or researchers who lack a big software budget, open-source applications may do the job just as well. But if you need a pro-grade tool that can handle any task, then you'll do well to purchase CorelDraw.
      To add some value to the premium membership, Corel has added in some new features that are not available in X6 or with the standard membership. These new features include: QR Codes; Validate Barcodes; Guideline Setups Docker; Alignment Setup Docker; The Camera Filter; Font Playground; and Color Styles. For more information about the subscription memberships visit this link: http://www.corel.com/static/product_content/cdgs/membership/CDGS_Membership_FAQs.pdf.
We'll work with the existing heading styles. When applying this technique to your own documents, you can modify the heading styles to reflect the properties you need—you're not stuck with the default settings. If, however, the built-in heading styles are already in use because you're working with an existing document, you'll have to create new styles. Avoid this route when possible. We'll be changing properties for the numbering scheme and not the actual heading styles.
Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.

Another possible solution if this is a document that has to be read by several or many people is to consider (remember we are talking about a 300 page document) creating a eBook format. Then the reader has some control over the format, or they can leave it alone. With a document this large, I would often load it onto a laptop, eReader, even a phone as the possibility of me being able to find the time to read it at one sitting without interruptions are very slim. This is not effective for all situations but I have found that when I am doing an intensive white paper, which might run into this many pages, the audience likes the ability to move it around to various device as they are reading. You can read PDF in a eReader, but by establishing it in LIT or ePub format then can comfortably read it on a phone, tablet, eReader, or laptop, as well as the main computer. Free programs like calibre will do the conversions for you, as well as be available to read it. On my android phone and tablet I use Aldiko which reads ePub, also free, and as an added bonus you can use the Calibre as a content server to download to you phone or tablet.

   For most of us, once we have upgraded, we never take the time to see exactly what was updated in the software. I must admit, I can be guilty of clicking on the update button with little regard for what is being installed on my system. Sometimes I upgrade CorelDRAW or other software updates and never really look at what has been changed or fixed within the service pack. I just assume it is better.
When you're working on a document such as a magazine or a book with many pages in it, using the master page feature in Adobe InDesign CC 2015 to insert automatic page numbering simplifies working with the document. On a master page, you designate the position, font, and size of the page numbers and any additional text you want to accompany the numbers such as the magazine name, date or the word "Page." Then that information appears on every page of the document along with the correct page number. As you work, you can add and remove pages or rearrange entire sections, and the numbers remain accurate.
i have a similar but bigger problem… the thing is that i installed the same font on 2 different machines (both with same os and software) the font is gill sans condensed, but it looks different on each one… the machines have exactly the same stuff and configuration… i even checked the screen dpi, the font smothness, etc but had no luck, anyone had this problem before? they look way too different, as if it was another font, but if i open a flash document, it would warn you if the font wasn’t installed, but it doesn’t (so this means that the font is installed) it just displays different… any clue?
Cons: Its old-school nature of user experience, however, means some of its features are kind of unintuitive to use for modern vector-handling, and also making it sometimes slow to work with. Since it is primarily confined to the Windows ecosystem also makes it difficult to work with files on another operating system unless you export it to another open standard for vectors. On top of that, the full price is far too much, considering Inkscape, being free, has a similar interface and can practically do 70% of what Corel can do. The subscription fee, while helpful, also isn't appealing, since professional illustrators would instead opt to get Affinity Designer instead.

Few people think this feature is handy. Yet many of us frequently work with tables given to us by clients. The one I run into most often is the Excel spreadsheet of price listings and item features, which I have to make presentable for a catalog or sales collateral. Many designers recreate these tables from scratch to make them clean and attractive, but this can be time-consuming, especially with large tables.
I first refered directly to the chapter 1-level paragraph style, but then got problems when a new chapter started on a right-page and not a left page, some picutures refered the previous chapter style. I then copied the chapter 1-paragraph style and made small text boxes with just the paragraph number on each page that starts a new chapter. I changed the text colour to no colour.
I’m new to InDesign, and thought I had sorted out figure numbering but am having trouble with the way that figures are numbered in my document. I set it up as described in this post, but some of my figures are in line and the captions are just another line of text in the body of the story, while others are full page graphics with text box captions that are not linked to the body of the document. Currently, the figure numbers run sequentially through the figures that are in line in the document, and then continue with the full page graphics. The problem is that the full page graphics come before any of the in line graphics, so they are out of order. Is there any way to correct this?
The Publications by Design has the templates grouped by design (e.g., Kidstuff, nature, etc.), and you have to scroll down to find the format you need (e.g., Newsletter, Web site, etc.).� This is the way to go if you have already decided on a particular design that you want to use across the board�for all of the types of documents you create.� All printed material (and even your Web site) will
Pros: I've been using CorelDraw since version 3 back in 1993. CorelDraw combines the features of apps like Illustrator, Photoshop and Indesign in one intuitive and easy to use application. Need to design a vector ad that uses a few images? Edit the image and adjust resolution inside CorelDraw without having to first use another program like Photoshop. Need page layout for a multi-page project? Do it all in CorelDraw instead of having to build every page or ad separately and import into a separate application just for page layout. In addition to features that allowed us to use a single program rather than multiple, CorelDraw has an assortment of shortcuts that just make sense, and that Adobe hasn't bothered to include an easy way to accomplish in programs like Illustrator. Select the next object below or last below is a perfect example of this. With Illustrator a simple feature like this wasn't possible until CS5, while Corel had it for years before. All in all, CorelDraw's ease of use and flexibility saved me countless hours over the years.
So, to create multi-level headings, you need to use the Level option just to the right of the List drop-down box. My second- and third-level headings use the same list as the first-level headings (this is necessary), except that they are changed to Level 2 and 3, respectively. Then, when numbering the section heading, you can insert the number of the previous-level heading above it. These can be selected using the arrow to the right of the Number field and selecting one of the levels under “Insert Number Placeholder.” So, the text in the Number field for my second-level heading is ^1.^#^t and it is ^1.^2.^#^t for the third-level heading. This presents the multi-level heading with dots between the numbers and a tab between the numbers and the section heading.
We will create an imaginary logo, and we apply the Blue Style. Then, to create the background, double click on the Rectangle tool (Toolbox > Rectangle tool or F6), to create a rectangle the size of the page. We apply the Yellow Style, and we then create a gradient (we press the G-key to activate the Interactive Fill tool and drag the handles to adjust the gradient). Finally, we expand the size to cover the bleed area. As the card measures 90x50 mm, we will make the background of 96x56 mm, centered on the page (to center the background object, select and press P on the keyboard).

I am designing my first book on indesign for a client who wanted to turn an academic paper into a book therefore it has a lot of references in the footnotes. The format we are using is a super script number in the body text and end notes at the end of every chapter with a continuous numbering throughout the book.  I am importing text individually for every chapter but I have not managed to find a way to keep the footnote numbering continuous in this method. Also I am not very experienced in running scripts.

Choose the figure number paragraph style in the list on the left, and the specific figure you’re pointing at in the list on the right. Then set the Format to Paragraph Number — after all, there’s no text in the paragraph; you just want its “number.” Don’t forget to set Appearance to Invisible so that you don’t have incredibly ugly black rectangles all over your document.
Cons: The one thing i can say that i didn't pretty much like with coreldraw is that it is somehow hard to learn, it takes a long time before you get use to the user interface and also the shortcut keys are not common unlike the Microsoft shortcut keys that are straight forward, but once you get use to the system, then sky is your limit because it's fun working with coreldraw and so many wonderful things can be done on it.
Have a customer that creates pricebooks for JohnDeer Dealers in excel then converts with acrobat & uploads them to a website. He got a virus forcing us to wipe and reload his PC. Reinstalled the same exact version of excel & everything else. But now when he opens his old excel files that he works in. The Fonts are tiny in some of his tables/cells. He has called me over and over again. I have told him to try decreasing his resolution or increasing the percentage size of items. & to check if some auto size font feature in excel is checked or unchecked. I am at a loss what else to tell him. I came across this website & The notion that maybe he used to have a special font that was lost in the wipe n reload. Is there a way to dissect one of his xls files to find out if they are calling for a font name we no longer have and it is being substituted for a different font by excel that is much smaller.
23 Feb 2010[23] X5 (15) 7 to X5 7 to X5 XP, Vista, 7, 8 Built-in content organizer (CorelConnect), CD, web graphics and animation tools, multi-core performance improvement, digital content (professional fonts, clip arts, and photos), object hinting, pixel view, enhanced Mesh tool with transparency options, added touch support, and new supported file formats.[24] It has developed Transformation, which makes multiple copies of a single object.
      It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
On occasion, re-installing CorelDRAW may be needed to update certain application files. When reinstalling CorelDRAW, turn off all non-critical background services and startup items. This will ensure that no other program conflicts with the installation routine. To disable service and startup items, refer to the instructions previously listed in this document.
A request for numbering headings in a new document doesn't have to elicit terror—it only sounds ghoulish. If you're good with styles, you might consider a custom numbered list style, but that's too much work. Instead, use Word's built-in heading styles for a painless process. My best advice is to get the numbering scheme in place before you create the document. Trying to number headings in an existing document really can cause nightmares!

      Now I know this is a big change for Corel. Traditionally, they have been opposed to policing how many times you installed the program on x number of computers. They seemed to be more concerned with the number of users than how many paid licenses they had. I can remember that for years you could buy the upgrade version and install it as a full version without ever needing to show a previous version as your proof of ownership. In all my years of buying software, I had never seen this before CorelDRAW. Well I guess Corel, like everyone else, is trying to clamp down and control who is using the program. Because of this, I am sure there are a number of users out there who will now probably take a closer look at whether or not they will upgrade.
There is no set limit as to how many fonts can be installed in Windows XP, Vista, and Windows 7. For best performance it is recommended that only required fonts be installed at any given time. Having too many fonts installed can decrease performance and lead to font corruption. It is also recommended that TrueType and Adobe Type 1 fonts with the same name not reside within the Windows Fonts folder at the same time. Finally, checking for corrupt fonts periodically is also advised (corrupt fonts are usually zero kilobytes in size). These fonts must be removed from the Fonts folder in Windows.

Note that some versions of Word may have slightly different ways to create numbering. Each version of Word is slightly different, so some of the exact placement of buttons may change. However, all current versions of Word allow page numbering by double-clicking on the top or bottom of the page. This will allow you to open up the Page Number menu.[3]


Cons: The biggest problem CorelDraw faces is that it is not advancing as quickly as its competitors. I still believe it is the best tool for the specific projects I had in the past, but if I had a project that involved solely vector illustration, or photo editing, I'm not sure if CorelDraw would be the best choice for it. It really shines in projects that would normally require a mix of PS, AI and ID. I hope that it continues to advance in the future so that it remains relevant for other types of projects as well.
Publish to 3D PDF with interactive viewing of 3D content in combination with other visual and text elements. Export from Corel DESIGNER to 3D PDF to generate output with all pertinent data and graphics in one document for cross-media publishing. 3D PDF files can be viewed with free PDF reader applications that are installed on almost any desktop or laptop computer.
Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering. I strongly recommend that you read both of these before doing anything with the contents of this chapter.
In 1995-6 I “wrote a book” on my Shakespearian laptop (already out of date at the time!). Now laptop is “broken” (no display on screen), how can I “read” this old format programme? (Old Word prog) Also have it on floppy disc but of course current PC’s have no floppy input, and please I don’t want to have to spend any money on new kit ‘cos I don’t have any spare! Many thanks, Hilary
Let's say you want to use different page numbers or number formats and styles in different parts of your document. You could use page numbers such as i, ii, iii… for the introduction and table of contents and 1, 2, 3… for everything after. The trick is to divide the document into sections and to make sure those sections aren’t linked. Then, set the page numbering for each of those sections by following these steps.

20 Mar 2012[26] X6 (16) 7 to X6 7 to X6 XP (32-bit only), Vista, 7, 8 Includes 64-bit and multi-core processor native support, support for 64-bit Adobe Photoshop plugins, and additional tools to import and export from Adobe Creative Suite and Publisher. Object properties, styles, and color styling have each been consolidated into their own docking toolbars. A new Unicode OpenType-based text engine modernizes text handling, including full international language support (the legacy text mode is retained). Dynamic alignment guides allow for easy repositioning without setting static guidelines. CorelConnect content organizer allows for in-application access to online sources such as Flickr for assets such as images and clip art. New tools permit manipulating vector images by pushing, pulling, smearing, etc. Various improvements in frame-based layout, masking, clipping and effects have been made.[27]
Just wanted to post my thanks for this, had a verry similar issue at working using a clients custom fonts, installed them to a few machines. Same document, connected to same printers and same word settings, a number of extra pages would randomly been added to any documents using the fonts but revert back when moved to a good machine. Been searching for a week and done the same as above seems to have solved it!!!

In Figure 4, I placed six raster images from my sample files using the “gridify” feature, producing a 2 × 3 grid of frames. When the Make Content-Aware Fit preference was turned off, the images were placed using the Fit Content Proportionally option (in Object > Fitting). When Make Content-Aware Fit is turned on by default, the feature did a pretty good job of finding the useful content to include within the frames. Of course, you can continue to tweak the image position manually in individual frames after using the fitting command.


Enjoy a more natural drawing experience and achieve more expressive results with the native support for Microsoft Surface, and advanced stylus support. Take advantage of pressure, bearing, tilt, and rotation when using the touch-up tools, painting and other brush tools within the applications. Experiment with rotation, flatness and elongation settings to control your brushstrokes in any given illustration.
When you add a new figure, and figure caption, make sure you anchor the text from the caption box (using blue anchor box on text frames) (if its not inline with the text frame…) and it will update the figure number…. unless you anchor it, it will just become the last number in the document. You will need to do this with all figures. Just anchor them and they will flow and update when needed! Hope this helps!
“I had wanted a Mac for a long time, for many reasons. I didn’t want to use a PC anymore, I wanted to try something different and the Mac is cool; so I got myself an iMac last month. In my free time, I do a lot of work in graphic design, image editing, and photography, and I’m a big fan of CorelDRAW. For those who are not familiar with this program, CorelDRAW is a popular graphics and image editing software program on Windows systems. It was one of the first applications that I installed on my PC in the 90s, so I now have a large number of files that I’ve created using this over the years.

Dark interface propbems – (sorry last post went wrong!!) Is there anyway of changing the interface colour in CS6? I would also prefer a lighter interface as can’t always see the type on the darker grey, can’t seem to find it on 6. Also does anyone know if you can make the handles on drawing objects any larger? All the designers must hace very young eyes, as a more mature designer(!!) they are REALLY difficult to see even with glasses and they stay the same size when you zoom in.
If we want to work with columns, we can also determine the number of columns and distance between them in "Tools > Options > Workspace > Document > Guides > Presets > User Defined > Columns". An important detail is, not to be confused with Paragraph Text columns which involves splitting a block of text into two or more columns (Text menu > Columns…). Dividing the page into columns does not automatically separate the text or content ̶ it's just a visual reference.
Pros: Instead of buying any logo or template I prefer creating it by myself and I often use CorelDraw to create such unique logo or elements. Whether you're a new user or an experienced designer, Corel DRAW makes it easy to get started with the easy user interface. You can quickly find fonts for any project with the font search and filtering feature. With new features of Corel Draw you will discover your hidden creativity. These new features are symmetry drawing mode, block Shadow tool, bitmap perspectives and publishing option to Wordpress. With faster processing and the new automatic alignment and straighten option CorelDraw is a competitive design software in the market.
To create an index entry which refers to another entry, select one of the cross-reference options (such as See or See also) from the Type pop‑up menu, and input the entry name in the Referenced text box, or drag the existing entry from the list at the bottom to the Referenced box. You can also customize the See and See also terms displayed in the cross-reference entries by selecting Custom Cross Reference from the Type pop‑up menu. (See Add “See” or “See also” cross-references to an index.)
×