Well, there you have it. CorelDRAW has finally chosen to fall in with the rest of the software world and force users to be legal. This may seem a little harsh in tone, but this is really what they are doing. For some of you out there, the time has come for you to “pay the piper” if you choose to upgrade to a new version of CorelDRAW. To its credit, Corel will now be allowing multi-user discounts for those installs where there are a number of users. Is it right? Sorry, but yes it is. Most other software programs already have the same ELUA and TOS. Corel really is finally putting their proverbial foot down and saying, “We are going to control this in terms of each user having their own license.” If you are one of those people who buys one copy and installs it on ten computers in your office, then you will not be allowed to do this once you have upgraded to X6.1 or higher.
By default, every time you open an InDesign document, the links to graphics and text files are checked. If anything is amiss, you get an alert rather than an open document. This seems slow to me, especially because I often open documents only to edit them. In many cases, I don’t even have the graphic files, so of course they are missing. InDesign is spending time checking something I already know about—and forcing me to respond with Don’t Update Links.
Home Screen/Start workspace changes. The initial screen you see after launching InDesign is now called the Home screen, and it still appears as the Start Workspace. By default, it also appears any time that when no documents are open. You can turn it off by going to the General pane of the Preferences dialog box and turning off Show ‘Start’ Workspace When No Documents Are Open.
First, add the image to your Word document, select the image, and choose Picture Tools on the Ribbon toolbar. Click Format > Wrap Text > Tight. Now, with the image still selected, click Format once more and choose Edit Wrap Points. A red line with black markers, called wrap points, will appear around the image. Adjust this line by dragging the wrap points: You can drag the wrap points inward to wrap text over the image, or drag them outward so that the text moves away from the image. Drag on the line itself to create additional wrap points, as desired. When you’re done, click away from the image, and the wrap points will disappear.
By default, bullets and numbers inherit some of their text formatting from the first character in the paragraph to which they’re attached. If the first character in one paragraph is different from the first characters in other paragraphs, the numbering or bullet character may appear inconsistent with the other list items. If this is not the formatting you desire, create a character style for numbers or bullets and apply it to your list by using the Bullets And Numbering dialog box.
When you click More Options in the Generate Index dialog box, formatting options appear that let you determine the style and appearance of the generated index. InDesign includes a number of built‑in paragraph and character styles that you can select to format the generated index, or you can create and select your own styles. After you generate the index, you can edit these styles in the Paragraph Styles and Character Styles panels.
Roger Wambolt, senior product trainer at Corel, eases in with an exploration of the interface and touches on the major players in the toolbox: the Pick, Shape, Crop, Curve, and Interactive tools. Then, once you know how to draw simple lines and shapes, he shows how to group, copy, and adjust objects on your document page. Plus, learn about working with text, using the new Font Manager and the extensive library of fonts in CorelDRAW, adding and editing images, automating tasks with scripts and macros, creating color palettes, and preparing your CorelDRAW projects for print. Roger closes with some tips on customizing the CorelDRAW interface to be more productive and create your designs in fewer steps.
But not all documents can use the CMYK color mode, because it requires 4 inks. If you create a file with only two or three colors (e.g. blue and yellow) perhaps it is best to use only two or three colors (Spot Colors), such as Pantone colors. In addition, not all colors can be printed using CMYK, e.g. "Gold", "Silver", etc. Some bright colors can only be achieved by using special inks, and these cannot be achieved with CMYK. Spot colors are also important for "non-printing objects" (for example, an outline to die cut) or "overprinted objects" (such as UV varnish). It's not only vectors that can use spot colors, also bitmaps can use Spot Colors. On the Bitmap Menu go to Mode > Duotone and convert the bitmap to one ("monotone"), or more spot colors.

You probably know about Word's mail merge feature, and you might even use it to print labels or other documents, where some of the information changes (such as form letters). You can use the same feature with Publisher. Although you might not think of Publisher as an Office app, it comes with several different versions of Office. In this article, I'll show you how to print sequentially numbered tickets using Publisher and Excel. This article provides instructions for Publisher 2007, 2010, and 2013.

There are many reasons why you might want to adjust the size of a layout, but the three most common adjustments are to page size, margins, or amount of bleed. It’s extremely easy to change any of these in InDesign, but changing them and altering your text frames and other page elements has long been a huge hassle. The new Adjust Layout feature in InDesign CC 2019 comes to the rescue.
I am using Corel draw since last 6 six years . It's a fantastic software to create graphics , visiting cards, pamphlets and leaflets. Shape tool is my favourite tool in Corel draw. There are many other tools which saves my lots of time. Transformation, clipping, convert to curves etc etc. There are endless things to share about Corel draw beauty. In short it is best software to new beginner in the field of graphic designing.
Since the first version of Adobe InDesign was introduced, several improvements have been made for creating numbered lists. The Bullets and Numbering dialog box lets you modify a numbered list and updates automatically when you add or remove paragraphs in the list. You can change the type of bullet, numbering style, character style, separator, font attribute and indent spacing.
However, note that just because you choose a font doesn’t mean your audience will see it. Fonts used for list or combo boxes are embedded (so the final viewer will definitely see them in the correct font). However, fonts you choose for text fields are not embedded in the PDF, and so the end user will only see the correct font if they’re using Adobe Acrobat or Reader and have those fonts active on their computer. If the fonts aren’t present, Acrobat and Reader will substitute Adobe Serif MM or Adobe Sans Serif MM.
Currently I’m struggling with figure numbering. I suppose there is some very easy solution to my problem and just have wasted too much time trying to find it myself. I use paragraph style for my figures, just the way you explained it. I don’t use cross-reference though. I don’t need it right now. I have similar problem as Giles. Every time I change an order of my figures, but within one, the same page, their order number doesn’t update and I don’t see any option neither to change it manually nor update it automatically. What am I missing?
   If you are a shop that relies on one version of CorelDRAW and it is installed on multiple computers, you may be in for a surprise and added expense if you update to a service pack 6.1 or higher, or if you decide that when a new version of CorelDRAW comes out, you want to upgrade and install one license on a number of computers. For example, if you usually have four people working at the same time on their own computers, then each version on each computer will require its own license. I know that a lot of shops have the same version of CorelDRAW on multiple computers. So, when upgrade time comes you could be in for a significantly higher cost.
In 1995-6 I “wrote a book” on my Shakespearian laptop (already out of date at the time!). Now laptop is “broken” (no display on screen), how can I “read” this old format programme? (Old Word prog) Also have it on floppy disc but of course current PC’s have no floppy input, and please I don’t want to have to spend any money on new kit ‘cos I don’t have any spare! Many thanks, Hilary

Although Microsoft Publisher is often associated with newsletter and brochure design, that’s not the only things it’s good for. You can use the software to create a wide range of publications including proposals, product sheets, services guides and much, much more! Whatever type of publication you’re looking to design, you can guarantee that Microsoft Publisher will help you do it.
I love picas and points, and have used them almost exclusively since the early 90s (with QX, then InDesign). Of course, I use inches or cm for page sizes and such, but picas/points is just more convenient for fine-tuned positioning on the page. After all, there are almost 3 points in a single mm! I’d rather move something 1 pt than have to type .2 mm.

See Word's Numbering Explained by John McGhie, MVP - comprehensive and not pretty (Downloadable pdf file in letter size) - Reading this is vital to anyone attempting to use automatic numbering or bullets in a law office setting or other places where the documents are likely to be reused or heavily edited. See also How to Create a Template with a downloadable template with style-based numbering.
Word Online automatically checks spelling as you type and applies a wavy red underline to misspelled text. Common AutoCorrect actions are included, such as correcting routine misspellings or converting characters to symbols. Additionally, you can set the proofing language or turn off the spelling checker for selected text. Learn more about differences between using a document in the browser and in Word.

Cons: Perhaps the only limitation I find in CorelDRAW is the need to innovate in terms of using simpler commands for users who are not as skilled. Sometimes having to look in the menu of the program with the mouse cursor, it becomes somewhat uncomfortable for those who are not so professional and are approaching the world of graphic design for the first time.
From version X4 (14) on, the CDR file is a ZIP-compressed directory of several files, among them XML-files and the RIFF-structured riffdata.cdr with the familiar version signature in versions X4 (CDREvrsn) and X5 (CDRFvrsn), and a root.dat with CorelDraw X6, where the bytes 9 to 15 look slightly different -- "CDRGfver" in a file created with X6. "F" was the last valid hex digit, and the "fver" now indicates that the letter before does no longer stand for a hex digit.
      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files.
Running captions number figures, tables, and other items consecutively in a document. For example, the first figure caption starts with the words “Figure 1,” the second with “Figure 2,” and so on. To make sure that figures, tables, or similar items are numbered consecutively, define a list for the item, and then create a paragraph style that includes the list definition. You can also add descriptive words such as “Figure” or “Table” to the numbering scheme of the paragraph style.
The ability to create custom paragraph and character styles is an excellent time-saving feature. This pane is visible in the work area by default, and if you’ve hidden it for some reason, you can bring it up by pressing Command/Control + F11. You can create styles exactly to your liking using many options; and then you can apply them to a portion of text with just one click.
You can change all three settings, but they aren't on the Numbering option's dropdown, where you might expect them. To access these options, right-click the numbers (not the list) and choose Adjust List Indents from the resulting submenu, as shown in Figure C. In the resulting dialog, adjust the appropriate settings. For example, in Figure D, you can see that I've transposed the first two settings. Figure E shows the new settings in place. If the ruler is enabled, you can also see that the left tab the feature uses moved accordingly.

Last year, though, a brilliant production artist mentioned to me that nobody really knows picas except for people with newspaper training. Whether this is true or not, it freed me up to work in inches. Let go of your guilt and work in the measurement system you prefer. Choose different options from the Horizontal and Vertical menus in the Units & Increments panel of the Preferences dialog.
InDesign is an essential tool for design firms, ad agencies, magazines, newspapers, book publishers, and freelance designers around the world. This course presents the core features and techniques that make this powerful page layout application fun and easy to use. Author David Blatner shows how to navigate and customize the workspace, manage documents and pages, work with text frames and graphics, export and print finished documents, explore creating interactive documents, and much more. He also covers popular topics such as EPUBs and long documents and includes advice on working with overset text, unnamed colors, and other troublesome issues that may arise for first-time designers.
Choose the XVL Studio 3D CAD add-on option to get animation tools and work with 3D CAD Engineering files. XVL Studio 3D CAD Corel Edition adds native 3D CAD file format support to ensure support for assemblies and parts from 3D CAD systems, including CATIA, Inventor, PTC Creo, SolidWorks, NX as well as 3D CAD exchange file formats incl. STEP, JT, and others.
Not available in Word Online. Advanced design features, such as starting documents from a large selection of professionally designed templates hosted on Office.com, are only available in the Word desktop app. However, Office 365 customers can configure a document library to launch a custom template when a user creates a new document. To learn more, see Add a content type to a list or library.

Pros: I use this software from so many years ago and with the time they have always improve, I use this to modify and edit images vectorizing and making great design for my presentations, through the years Corel DRAW have added more features and options to make the design more complex and details, the bright options and the vectorizing tool are better than they were in the past, the details of the images is awesome and the extension are endless, for design this is one of my favorites.
For my workflow, I decided to turn off Check Links Before Opening Document in the File Handling pane of the Preference dialog. Yes, sometimes I do have the imported files, but in those cases I don’t move the files. And I have to check the links before output anyway. Anything you can do to make opening documents more seamless is nice, so check out this preference and others in this area.

You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
After adding a few more facts, as shown in Figure F, you might notice something new—the two-digit numbers don't align with the previous one-digit numbers. You could leave the list as is, but most likely you'll want to adjust it. Leaving it as is makes the reader uncomfortable; it's simply not as readable as it should be. We expect numbers to align using the period character or the right-most digit if there's no punctuation.

To make the best use of the first few pages of a newsletter, you should start a long story on one page and finish it on a later page. That way, you can fit more stories on the front page, which is what your readers will see first. You can accomplish this by placing the story in linked text boxes, so that when the first text box is full, excess text will automatically flow into the second text box.
17 Jan 2006[20] X3 (13) X3 † 7, 8, 9, 10, 11, 12, X3 2000, 2003, XP (32-bit, 64-bit), Vista(32-bit only), 7, 8 Double click Crop tool (the first vector software able to crop groups of vectors and bitmap images at the same time), Smart fill tool, Chamfer/Fillet/Scallop/Emboss tool, Image Adjustment Lab. Trace became integrated inside Draw under the name PowerTrace.
Theory is great, and articles like this one can give you quick useful tips, but the best way to learn is by practice. If you are new to InDesign, try this: use an existing layout as a guide (anything you want: a page from a magazine, a poster or a business card), and try to recreate it from scratch. Familiarize yourself with the tools, menus and options. If you get stuck, you can always search for tips and tutorials or ask a friend.
With Word Online, you can apply font, font size, and several font formatting attributes—including bold, italic, underline, and superscript. Highlight text, change font color, and clear formatting for selected text. Document theme formatting is available to format text in Word Online. Find the active theme fonts at the top of the Fonts gallery and theme colors in the Font Color gallery. Learn more about differences between using a document in the browser and in Word.
Certain XP themes have been identified as cause operability problems with certain versions ofCorelDRAW. Furthermore, Visual Effects require resources in order to function correctly, which may have an adverse effect on applications installed on the system. Disable Themes and Visual Effects to determine if the problems persist. To disable themes, do the following:
Cons: Among the couple of problems I can state about this program remains in recommendation to the gradients, since when it is printed it does not work effectively, as if it had low levels. The filters for photos, since they do not deal with pictures with lots of information, they do not look extremely natural or lose the majority of the information when used.
With Word Online, you can apply font, font size, and several font formatting attributes—including bold, italic, underline, and superscript. Highlight text, change font color, and clear formatting for selected text. Document theme formatting is available to format text in Word Online. Find the active theme fonts at the top of the Fonts gallery and theme colors in the Font Color gallery. Learn more about differences between using a document in the browser and in Word.
Multi-level numbering is quite easy, once you’ve figured out how to do it. I am using InDesign CS4 to write a technical dissertation, and it works great with my multi-level headings, such as “3.4.1 Partial Transient…”, and figures and tables throughout each section (or chapter). I do have the whole document in one file, but it’s not too large since the images are all linked.

As I mentioned above, you can now convert footnotes to endnotes and endnotes to footnotes in your document. To convert footnotes and endnotes, choose Type > Convert Footnote and Endnote. In the dialog box, you can specify whether you want to convert all the endnotes and footnotes in your document or only from the selection. Also, when importing Word or RTF files, there is now an option to place Word endnotes as static notes. Choosing static notes imports endnotes the way they were imported in InDesign CC 2017 before InDesign’s own endnote feature was introduced.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
×