For future installs and if you have updated with service packs, you now fall under the new terms of service and you need to get registered. Everything you do from now on is controlled by your new membership. This membership is created and locked to the e-mail account you use. So when you do register, make sure you use an e-mail address that you intend to keep and that you regularly receive e-mails with. Do not select a fake one or one you never use.
Ha! Thank you Anne-Marie for confirming that this is the way to do it. To not be able to reference the current section number in a numbered paragraph style, when you can do it in a footer is so mind-bogglingly irrational. I’d already worked out the work-around you suggest, but fear that some of the chapters of the project I’m working on may need way too many duplicate sets of figure-reference styles for the solution to be at all elegant. As I’m only at the very start of what will be a two-year project I thought I’d hunt for a more logical solution – I’m amazed that this issue was discussed back in 2010 and that oh-so-simple section marker in paragraph numbering is still not available in December 2014! Maybe we all need to chip in a bit more to Adobe so they can add a few more of their “just do it” feature requests!

Organize and manage your font library with the intuitive Corel Font Manager and use your frequently used fonts without installing them, and work faster with fonts using the network storage feature. Quickly find and install fonts for your technical illustration projects, organize fonts for easy access, or manage unneeded fonts. In addition, you can browse and search online and local fonts, preview font glyph sets, create font collections, and more.
If you are preparing a document for print, keep your margins and bleeds in mind from the beginning. Your printer will give you the measurements for the bleed, but generally 1⁄8 inch or 3 mm should suffice. Approximately the same area within the document should be kept free of text and important graphic elements (such as the logo). Set up your document for bleed in InDesign as you create it by selecting the correct settings in the document set-up box.
Dear All, I have corel installed on two laptops. Both of these laptops have arabic support enabled via windows xp. I have been facing a very unusal problem, my problem is that one laptop writes digits in the Hindi numerical form (which are the digits that we use in the arabic writing), the other on doesnt, it only writes the Arabic numerical form (which are the digits used in the english langague). Both these computers have the same set of softwares on them. I have matched the settings for both on them in the control panel, and the font i use is the transparent arabic.
      It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
Cons: There is a lot of features and that is not an understatement. As the result, it does take some time to learn about all of them. If I don't use it for a while, my learning curve goes up quite a bit but it also goes down just as fast. The one feature I do have trouble with is a perfect circle but the convert to curves and the grid function do solve that.
Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.
Cons: Perhaps the only limitation I find in CorelDRAW is the need to innovate in terms of using simpler commands for users who are not as skilled. Sometimes having to look in the menu of the program with the mouse cursor, it becomes somewhat uncomfortable for those who are not so professional and are approaching the world of graphic design for the first time.
For Pinyin, if multiple words have the same Pinyin, the order is sorted by (1) tone and (2) stroke count in ascending order. For Stroke Count, each character is sorted by (1) stroke count, (2) first stroke, and (3) second stroke. You can either edit the sort information directly in the Sort By field, or you can click the arrow to the right of the Sort By field to open either the Pinyin Entry dialog box or Stroke Count Entry dialog box. You can edit the fields and click OK. Repeat this process for each topic level.
I'm using Word 2016 (desktop) on a Windows 10 64-bit system, but this article applies to earlier versions. 365's browser edition displays numbered lists and offers a few basic settings. However, you can't apply either option discussed in this article using the browser. For your convenience, you can download the sample demonstration .docx or .doc file.
To line up images relative to each other across the page, select the images and click the Picture Tools tab on the Ribbon; then click Format > Align > Align Selected Objects. Finally, click Format > Align once more, and click Align Top (to align their top edges) or Align Bottom (to align their bottom edges). When you click Format > Align, you’ll see that you can also choose Distribute Vertically or Distribute Horizontally to space images evenly down the page margin or space them evenly relative to each other (depending on whether you select Align to Page or Align Selected Objects).

Choose the figure number paragraph style in the list on the left, and the specific figure you’re pointing at in the list on the right. Then set the Format to Paragraph Number — after all, there’s no text in the paragraph; you just want its “number.” Don’t forget to set Appearance to Invisible so that you don’t have incredibly ugly black rectangles all over your document.
Excellent stylus support (including the ability to adjust stylus tilt, bearing and rotation in real time). A quick editing workflow. Each node has a distinct appearance depending on the handle or selection type, and the size, colours and shapes of the editing points are customisable via Options. More intuitive interactive sliders for gradients, blends, transparency and so on wrap up a decent release.
Workspace settings are used to save customization information in CorelDRAW. Custom toolbars, menus and shortcut keys are all saved to the workspace on exit. The next time CorelDRAW is launched, all customization from the previous session is restored. On occasion however, problems may develop with custom workspaces which affect the operation of CorelDRAW. It may be required that the workspace be reset in order to improve application performance. For information on how to reset the workspace in CorelDRAW, refer to Resetting Application Defaults in CorelDRAW® and PHOTO-PAINT® Running on Windows®
Pros: I have used this software for 3 years and I can verify that it is easy to learn, it also contains a great help panel, the automatic vectorization tool is incredible, the preview of the texts facilitates the design process, it contains a wide range of tools manual vectorization. in general lines it is a very complete software suitable for beginners and experts
Word Online automatically checks spelling as you type and applies a wavy red underline to misspelled text. Common AutoCorrect actions are included, such as correcting routine misspellings or converting characters to symbols. Additionally, you can set the proofing language or turn off the spelling checker for selected text. Learn more about differences between using a document in the browser and in Word.
Choose from a variety of workspaces designed for different proficiency levels and specific tasks: Page Layout and Illustration, a Classic option for longtime users, a Lite option for new users, Technical Illustration for pros doing isometric illustrations, Diagramming for pros using flowcharts and diagrams, and workspaces with the look and feel of Adobe Photoshop and Adobe Illustrator.
Place the insertion point in the paragraph and choose Restart Numbering from the context menu or choose Type > Bulleted And Numbered Lists > Restart Numbering. In normal lists, this command assigns the number 1 (or letter A) to a paragraph and makes it the first paragraph in a list. In multi-level lists, this command assigns the first lower-level number to a nested paragraph.
There is no set limit as to how many fonts can be installed in Windows XP, Vista, and Windows 7. For best performance it is recommended that only required fonts be installed at any given time. Having too many fonts installed can decrease performance and lead to font corruption. It is also recommended that TrueType and Adobe Type 1 fonts with the same name not reside within the Windows Fonts folder at the same time. Finally, checking for corrupt fonts periodically is also advised (corrupt fonts are usually zero kilobytes in size). These fonts must be removed from the Fonts folder in Windows.
Currently I’m struggling with figure numbering. I suppose there is some very easy solution to my problem and just have wasted too much time trying to find it myself. I use paragraph style for my figures, just the way you explained it. I don’t use cross-reference though. I don’t need it right now. I have similar problem as Giles. Every time I change an order of my figures, but within one, the same page, their order number doesn’t update and I don’t see any option neither to change it manually nor update it automatically. What am I missing?
To change the default, choose High Quality from the Default View menu in the Display Performance panel of Preferences. For good measure, I also unchecked Preserve Object Level Settings so that even graphics that are set to Fast or Typical (via Object > Display Performance) always display at High Quality. (But what about that big background graphic that is slowing you down? Put it on a layer and hide it. Don’t display it as a shadow of its former self.)

   When you launch CorelDRAW, you are now logged into the Corel server using the account you have set up. As a result, only one version of CorelDRAW X6 (a licensed copy) can be running on one computer at one time. For example, if I have the program running on one computer and then I decide to run the same licensed version of CorelDRAW from another computer, I am now forced to log out of the software on the first computer before I can start CorelDRAW on the other computer. (I can shut down CorelDRAW or shut that computer down.)
Since Word 2000 applies outline numbering by default, as you press TAB or SHIFT+TAB in a numbered list, you are moved to the next or previous outline level. If you are in a numbered list that has outline numbering generated by the method described in the previous exercise, when you choose Bullets and Numbering from the Format menu (or alternate-click a portion of the numbered list), the Numbered tab appears on the Bullets and Numbering dialog box. However, if you first select the entire list and choose Bullets and Numbering from the Format menu, the Outline Numbered tab from the Bullets and Numbering dialog box is selected.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files. desktop numbering using publisher
×