Therefore, if you send an image with 600 dpi or higher resolution, this will produce only slower and larger files but will not improve the resolution. Some people send images with 1800 dpi, 2400 dpi and more and this only creates much larger files, but does not increase the quality of the output. You'll see it better on screen if you zoom in on the image, but the printed result will be 300/400 dpi. Some people ask about inkjet printers that claim to print at 2400 dpi or more. There's a lot of confusion about this, since they use "dpi" (talking about printed dots per inch), which is the printing quality, not the resolution of the images. And, for large format printers (plotters), there is no need to use high resolution bitmaps ̶ on the contrary, the larger the size the lower the resolution needed. But, since they don't produce color separations and the printing process is totally different, the "300 dpi" standard is not applied to plotters, laser or inkjets.
Add all of the elements that are repeated throughout most of your document: guides, page numbers, a running text box, image frames, graphic elements, etc. You can have more than one set of master pages in a document, which is particularly useful for brochures, whose content often varies (for example, with a mostly textual introduction followed by image-heavy pages).
Add context to your technical projects by using 3D views and models in your technical illustrations. With XVL Studio Corel Edition, integrated with CorelDRAW Technical Suite 2018, you can create high-quality renderings from 3D views that are imported from DWG, 3DS, or IGES 3D model files. You can easily transform these 3D views into vector illustrations by using the enhanced “Send to Corel DESIGNER” feature.
Active X controls, embedded OLR objects, and a signature line will display in the document as expected in View mode. In Edit mode, they appear as placeholders that you can delete but not edit. They cannot be moved or resized in Word Online. Advanced controls and macros are only available in the Word desktop app. Learn more about differences between using a document in the browser and in Word.

As a magazine design, the process is similar but with a few differences. The first step, as always, is to define the format of the magazine. Suppose the finished magazine should measure 19x27 cm then double-click on the page border (this takes us to: Tools > Options > Workspace > Document > Page Size), and choose the size of two pages together: 38x27 cm (the bleed as always, should be 3mm but can be more if preferred).
Organize and manage your font library with the intuitive Corel Font Manager and use your frequently used fonts without installing them, and work faster with fonts using the network storage feature. Quickly find and install fonts for your technical illustration projects, organize fonts for easy access, or manage unneeded fonts. In addition, you can browse and search online and local fonts, preview font glyph sets, create font collections, and more.
Other features that may be expected include find and replace, which replaces one word with another, and the ability to import [import: A good or service which enters a country. ] graphics [graphics: visuals intended to brand, inform, illustrate or entertain, eg photographs, drawings, maps, diagrams etc. ], eg from a clip art [clip art: clip art is a library of images, photos and sounds provided by Microsoft as part of its office suite ] library. Headers and footers and page numbering are also very useful.
You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
On the "Objects" tab you had several important options. The standard PDF X-3 is good, so you don't need to change anything. In particular, it's not needed to convert text to curves, because the PDF will embed all the fonts. Use this option only if you use fonts with restrictions for print, but only a few fonts have this problem. The 'Convert to curves' option will create a bigger and more complex file, and some RIPs will have problems processing it. Since the fonts will be embedded, it is not necessary to convert text to curves.
In December 2006 the sK1 open-source project team started to reverse-engineer the CDR format.[38] The results and the first working snapshot of the CDR importer were presented at the Libre Graphics Meeting 2007 conference taking place in May 2007 in Montreal (Canada).[39] Later on the team parsed the structure of other Corel formats with the help of the open source CDR Explorer.[40] As of 2008, the sK1 project claims to have the best import support for CorelDraw file formats among open source software programs. The sK1 project developed also the UniConvertor, a command line open source tool which supports conversion from CorelDraw ver.7-X4 formats (CDR/CDT/CCX/CDRX/CMX) to other formats. UniConvertor is also used in Inkscape and Scribus open source projects as an external tool for CorelDraw files importing.[41][42][43]
At this point, you could click OK and start your document. But, let's modify the scheme instead. Click the Define New Number Format button. In the resulting dialog, click the Font button and choose Chiller from the Font list and click OK (only once). Click inside the Number format control—to the left of the example character—and enter Heading, as shown in Figure D. Click OK twice. If you check the properties now (Figure B), you'll find a numbering scheme. Click OK once more to return to the document. Heading 1 in the Styles Quick Gallery displays the new numbering scheme.
I work in Microsoft Word a lot, and it just loves to try to help you out. While a lot of its help can be a hindrance, the underlining of possibly misspelled words, repeated words, and the like can be pretty handy. If you’d like to see this in InDesign, check Enable Dynamic Spelling in the Spelling panel of the Preferences dialog. (You can quickly toggle this from the Edit > Spelling menu as well.)
Although Microsoft Publisher is often associated with newsletter and brochure design, that’s not the only things it’s good for. You can use the software to create a wide range of publications including proposals, product sheets, services guides and much, much more! Whatever type of publication you’re looking to design, you can guarantee that Microsoft Publisher will help you do it.
Create your illustrations and diagrams in accurate scale with the drawing scale control. View the active drawing scale, switch to another preset or set a custom scale at any time. In addition, Corel DESIGNER maintains the drawing scale when importing a vector illustration from a 3D model view so that imported views can be placed at a precise scale.
Another master layer is created for the names of the weekdays, which are also common to all pages. The sequential position of the background and the weekdays is different, which is why two master layers are needed. The weekdays layer is sixth from the bottom in the sequence of layers. This master layer must be placed on top of all layers (Figure 9).
Desktop publishing is a term coined after the development of a specific type of software. It's about using that software to combine and rearrange text and images and creating digital files for print, online viewing, or websites. Before the invention of desktop publishing software, the tasks involved in desktop publishing were done manually by people who specialized in graphic design, typesetting, and prepress tasks.
Originally, I had an other problem as well. The first no on a level 2-numbering refered to the section and not to the chapter. I had a book with 2 parts and 3-5 chapters in each part. The numbering then all started on 1 in book-part 1 and all on two in book-part 2, (i.e. figures in book-part 2 chapter 4 all numbered 2.1). I got around that by creating 8 dokuments/book parts for my 8 chapters, but if someone knows how to fix this properly Í’m eager to hear about it!
I agree with Sherry, Matt, and Jack that measuring in picas is easier and more logical than measuring in inches. And it is not true that only people who worked in newspapers understand picas. Most if not all the InDesign books I’ve gone through use picas and points in their illustrations. You can move or adjust objects by a tenth of a point (0.1 pt) or three-tenths without using a calculator.
      It looks to me as though Corel, like most other software producers, is making strides to control the number of times a particular license is installed. Is it wrong? Based on other programs, no. Based on what Corel has done in the past, well, that is a bigger question. Admittedly, in the days of dwindling revenues and soaring costs, everyone is looking for ways to create additional cash flow from their operations and Corel is no different. I have always been an advocate of updating the programs and machinery that you make your money with. Let us hope that Corel makes it worth our while to do so. I do not mind updating as long as I find tools that I can use. If Corel continues to shy away from giving us reasons to upgrade (and by “us” I mean those of us in the engraving and awards industry), then maybe it is time to look elsewhere for a software solution.
Add all of the elements that are repeated throughout most of your document: guides, page numbers, a running text box, image frames, graphic elements, etc. You can have more than one set of master pages in a document, which is particularly useful for brochures, whose content often varies (for example, with a mostly textual introduction followed by image-heavy pages).
I have read up on the InDesign figures and cross referencing and have been testing this out. I am using separate text boxes for each figure description with the jump frames command. When I delete a figure the numbers automatically update and I can update the cross references. However, when I add a figure the numbers go out of sequence and I can’t work out how to update them. Perhaps there is another setting I need to change? Is there a way of numbering text boxes sequentially? I was able to thread boxes to update the numbers but this could lead to problems down the line…Any advice on this would be greatly appreciated.
Virtual Memory is used by Windows to swap information from RAM to the hard disk in order to free memory for use by applications when physical RAM is low. A paging file is used to accomplish this task. By default, Windows manages the paging file size and sets it to 1.5 times the amount of RAM on the system. This can be increased in cases where CorelDRAW appears to slow as a result of graphic and object intensive documents. When setting the paging size, the max size should never exceed 3 times that amount of physical RAM installed on the computer. To increase Virtual Memory settings, please consult the Windows help files.
Lastly, please do not use the keyboard shortcuts in this article to achieve foot and inch marks. The true marks are in the Symbol font – or can be found in the “glyphs” palette. The other marks are prime and double prime; seasoned designers and typographers know the difference, just as they know the differences and uses between hyphens, en-dashes and em-dashes.

 	Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.

At least 20% of the corrupted file case, the culprit comes from the Page Panel. That thing is a mess and Adobe refuse to recognize its related issues. The thing is that the Page Panel update itself LIVE while you modify the content. It’s DOUBLE the memory usage from reading the page content regardless of the size of the thumbnails and it doesn’t load its content with references to the masters, but instead with reference to individual pages. This means, if you got 75 elements per pages while 30 of those are part of the masters, those 30 are loaded multiple time in the RAM at once as its reference to each page “current” state. Turning off the Preview in the Thumbnails stabilize the document (especially when you move/add/remove pages), but come at the cost that you need to know where you are in the document with the pages numbers. Some might hate it because it requires them to use their brain a bit more (and we all know we’re already over-use it), but it’s a give to receive situation.
      Now I know this is a big change for Corel. Traditionally, they have been opposed to policing how many times you installed the program on x number of computers. They seemed to be more concerned with the number of users than how many paid licenses they had. I can remember that for years you could buy the upgrade version and install it as a full version without ever needing to show a previous version as your proof of ownership. In all my years of buying software, I had never seen this before CorelDRAW. Well I guess Corel, like everyone else, is trying to clamp down and control who is using the program. Because of this, I am sure there are a number of users out there who will now probably take a closer look at whether or not they will upgrade.
20 Mar 2012[26] X6 (16) 7 to X6 7 to X6 XP (32-bit only), Vista, 7, 8 Includes 64-bit and multi-core processor native support, support for 64-bit Adobe Photoshop plugins, and additional tools to import and export from Adobe Creative Suite and Publisher. Object properties, styles, and color styling have each been consolidated into their own docking toolbars. A new Unicode OpenType-based text engine modernizes text handling, including full international language support (the legacy text mode is retained). Dynamic alignment guides allow for easy repositioning without setting static guidelines. CorelConnect content organizer allows for in-application access to online sources such as Flickr for assets such as images and clip art. New tools permit manipulating vector images by pushing, pulling, smearing, etc. Various improvements in frame-based layout, masking, clipping and effects have been made.[27]
You can change all three settings, but they aren't on the Numbering option's dropdown, where you might expect them. To access these options, right-click the numbers (not the list) and choose Adjust List Indents from the resulting submenu, as shown in Figure C. In the resulting dialog, adjust the appropriate settings. For example, in Figure D, you can see that I've transposed the first two settings. Figure E shows the new settings in place. If the ruler is enabled, you can also see that the left tab the feature uses moved accordingly.

      As mentioned, you must have an account to get any updates now with version X6, which is different from earlier versions of CorelDRAW. In older versions, updating CorelDRAW with a service pack involved going to the Corel website and downloading the service pack. In more recent versions, the update could be done automatically via the Update command in the Help menu in the software. With Version 6.1, updates can only be done after you create an account with Corel and then log into the account via CorelDRAW.
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.

The Adjust Layout feature can alter your page elements in several different ways, including resizing and moving frames. But it can also (optionally) alter the size of your text on the page. For example, if you’re converting a large A3 poster into a smaller A4 flyer, you probably want all your text to be half as large (and with half the leading). This is a pain to do manually, but it’s just a checkbox away with Adjust Layout (Figure 3).


To make the best use of the first few pages of a newsletter, you should start a long story on one page and finish it on a later page. That way, you can fit more stories on the front page, which is what your readers will see first. You can accomplish this by placing the story in linked text boxes, so that when the first text box is full, excess text will automatically flow into the second text box.
As a magazine design, the process is similar but with a few differences. The first step, as always, is to define the format of the magazine. Suppose the finished magazine should measure 19x27 cm then double-click on the page border (this takes us to: Tools > Options > Workspace > Document > Page Size), and choose the size of two pages together: 38x27 cm (the bleed as always, should be 3mm but can be more if preferred).
      For future installs and if you have updated with service packs, you now fall under the new terms of service and you need to get registered. Everything you do from now on is controlled by your new membership. This membership is created and locked to the e-mail account you use. So when you do register, make sure you use an e-mail address that you intend to keep and that you regularly receive e-mails with. Do not select a fake one or one you never use.
As I mentioned above, you can now convert footnotes to endnotes and endnotes to footnotes in your document. To convert footnotes and endnotes, choose Type > Convert Footnote and Endnote. In the dialog box, you can specify whether you want to convert all the endnotes and footnotes in your document or only from the selection. Also, when importing Word or RTF files, there is now an option to place Word endnotes as static notes. Choosing static notes imports endnotes the way they were imported in InDesign CC 2017 before InDesign’s own endnote feature was introduced.

If the same characters are input in the Topic Level box, they are handled as separate index entries if a different yomi is entered. For example if “Cat” is input as an index entry with a reading of “Neko” in katakana, and then input a second time with a reading of “Neko” in hiragana, two index items for “Cat” will be generated. This feature can also be used to classify the same term under separate index topics. For example, when entering the term “The Cats” in an index, if “Cats” is input in the Yomi text box and two index entries are created without any input, the term “The Cats” will be generated under the T and C index topics.
×